ZyXEL Communications P-660RU-T1 v3s User manual

www.zyxel.com
P-660RU-Tx
ADSL2+ Ethernet/USB Router
Version 1.00
Edition 1, 01/2010
DEFAULT LOGIN DETAILS
IP Address http://192.168.1.1
User admin
Password 1234
2010 ZyXEL Communications Corporation
C

ENGLISH
2
Introduction
The P-660RU-Tx is an ADSL2+ router with firewall and both
Ethernet and USB ports.
What You Have to Do
• Install the USB driver.
If you want to connect a computer to the USB port,
install the driver before you connect the device to the
computer’s USB port. Insert the included CD. The CD
runs automatically. Follow the steps in the screen to
install the USB driver.
•Connect the Hardware, see page 3
•Internet Access, see page 4
See the User’s Guide for more details on all features.

ENGLISH
3
Connect the Hardware
1. DSL: Use a telephone wire to connect this port to a
telephone jack.
2. ETHERNET: Use an Ethernet cable to connect this
port to your computer’s Ethernet port.
3. USB: Use a USB cable to connect this port to your
computer’s USB port.
4. POWER: Use the included power adaptor to connect
an appropriate power source to this socket. Push
the power switch to the on position.
Do not connect the same computer to both the USB
and Ethernet ports on the P-660RU-Tx.
ENGLISH

4
Internet Access
You need your account information provided by your
ISP, such as user name, password, and so on.
1. Enter the default IP address http://192.168.1.1 in
your browser. Then type the user name (admin by
default) and password (1234 by default) in the login
screen. Click OK.
2. Click Quick Start > Quick Start and follow the steps
in the wizard to configure the Internet connection.
See the Quick Start Wizard chapter in the User’s
Guide for more details.

ENGLISH
5

6