1 BY ONE O00VP-0636 User manual

COLOR VIDEO DOOR PHONE KITS
SKU: ODEVP-0636
www.1byone.com
1byone Products Inc.

6mm
7x 7x
1 x indoor video monitor 1 x adapter
1 x outdoor video doorbell 1 x Rain cover for video doorbell
7 x screws and plastic plugs 1 x mounting bracket for monitor
1 x instruction manual 1 x 15m (49ft) cable
1 x hex wrench
If any package contents are visibly damaged or missing, please immediately contact 1byone Support
Center at https://www.1byone.com/Support for assistance.
5m
6mm
Tools needed, but not included, for installation of the video doorbell:
01
EN
DE
FR
ES
IT

2 1
4 3
Part Names
Power LED
Monitoring LED
Gate Door Open
Monitor
Unlock
Talk
7〞TFT LCD Screen
Menu
Quit
Up
Down
Volume Button
Speaker
Connectors
Volume Adjuster
Connectors
Power Terminal
Microphone
SD card slot
02
Calling button
Speaker
Camera
Mircophone
IR LED
EN
DE
FR
ES
IT

Installation
Installing the outdoor video doorbell:
1.Mount the rain cover to the wall with screws:
2. Remove the screw at the bottom of the outdoor video doorbell using the supplied hex
wrench and remove the front cover.
03
ø6mm
80mm
127mm
1 2
4 5
3
EN
DE
FR
ES
IT

ac
12456
3
2
b
Wiring instructions:
Terminal 1 and Terminal 2 connects to Terminal 1 and 2 on the indoor monitor.
Terminal 3 and Terminal 4 can connect to an Electric Lock with Voltage ≤12V and
current ≤1A.
Terminal 5 and Terminal 6 can connect to a Gate Door Lock.
3. Connecting the outdoor doorbell wires and adjusting doorbell talk volume:
1 2 34 5 6
1 2 3 4 5 6
04
EN
DE
FR
ES
IT

4x 4x
+/- 1.65m(5.4ft)
4x
x
x
x x
x
x
5m
6mm
i
4. Attach the main body of the outdoor video doorbell to the rain cover. Please do not install
the camera facing directly into sunlight or in a location that gets very wet when raining.
Reattach the front cover and insert the screw at the bottom of the outdoor video doorbell.
Tighten the screw using the supplied hex wrench.
Fix the mounting bracket to the wall with screws:
Installing the indoor monitor:
05
1 2 3
EN
DE
FR
ES
IT

Terminals 1 and 2 connect to
outside doorbell
Terminals 3 and 4 connect to
additional indoor monitor
2 1
4 3
2 1
4 3
Wiring instructions:
Terminal 1 and Terminal 2 should connect to Terminal 1 and Terminal 2 on the
outdoor station
Terminal 3 and Terminal 4 should connect to the additional indoor monitor if needed
Terminal power should connect to the Adapter.
Wiring the indoor monitor:
2 1
4 3
a
c
b
(8-1)
2 1
4 3
(8-2)
2 1
4 3
(8-3)
06
EN
DE
FR
ES
IT

07
EN
DE
FR
ES
IT

Recommended cables based on wiring distances:
● 0-25 meters, use 0.75mm x 2 wires
● 50-100 meters, use 1.0 mm x 2 wires
● 100 meters is maximum wiring distance
One outdoor video doorbell can work with two indoor monitors. If two monitors are
needed, the recommended SKU to purchase is O00VP-0689.
Wiring diagrams and recommend cables：
1 2 3 4 5 6
2 1
4 3
Outdoor Doorbell
Gate Lock
Power
Indoor Monitor A
Lock
2
2
2
A Dis
08
EN
DE
FR
ES
IT

How to use:
1. Adjusting ‘Talk’ volume:
2. Selecting melodies and adjusting melody volume:
Melodies:
Press and hold “Monitor” button for 4 seconds until the ‘BEEP’ is heard. Then select
tones by pressing “Monitor” button. Press “Door Open” button to confirm.
Melody volume:
Press and hold “Monitor” button for 4 seconds until the ‘BEEP’ is heard. Then press “Talk”
button to selected preferred volume level. Press “Door Open” button to confirm.
The visitor presses the “Call”
button on the outdoor doorbell.
The indoor video monitor will play the programmed melody
and the image of the visitor will be displayed on the monitor.
A
09
3. Calling, talking, and unlocking door/gate:
EN
DE
FR
ES
IT

When 2 indoor video monitors are installed:
Talk function – Both monitors will ring and display outdoor video when a visitor presses
“Call” button. Press the “Talk” button on one monitor to communicate with visitor. The “Talk”
button can be pressed on both monitors but visitor will only be able to hear one monitor at a
time.
Monitoring function – Pressing The “Monitor” button on one video monitor will display
outdoor doorbell video on both indoor monitors.
B C
The host can speak with the visitor by
pressing the “Talk” button on the indoor
monitor. Press “Talk” a second time to
turn off the monitor.
Press the “Unlock” button to open the
door for the visitor (using a
purchased Electric Lock).
Note: While speaking with a visitor, you can adjust talk volume/brightness/contrast as
needed. Visitor talk mode will automatically close after 120 seconds (2 minutes).
4. Monitoring:
Press the “Monitor” button again
to return to standby mode.
Press the “Monitor” button to
monitor outside using the outdoor
doorbell’s camera.
Note: Monitoring mode will automatically close after 40 seconds.
Press the “Talk” button if you wish to speak with a visitor while in Monitoring mode.
Press the “Unlock” or “Gate Door Open” button to open the door/gate.
Adjust talk volume/brightness/contrast if needed.
A B
Press the “Gate Door Open” button
to unlock the gate door for the visitor
(using a connect gate door).
D
10
EN
DE
FR
ES
IT

5. OSD settings and operation:
5.1 Setting monitor language:
Select from English, Italian, Spanish, Portuguese, French, Dutch, Greek, and Polish.
5.2 Photos and video settings:
The outdoor doorbell’s camera will automatically take a photo when a visitor
presses the “Call” button and will store the photo in internal memory. Video can
also be taken and stored on an inserted SD card.
“Photo” and “Video+Photo” modes:
Setting “Photo” mode will set the outdoor doorbell to automatically take one photo
when a visitor presses the doorbell’s “Call” button.
Setting “Video+Photo” mode will take both a photo and video when the “Call” button is
pressed.
Brightness
Contrast
050
050
Date YYYY - MM - DD
Time 00 : 19
Setup
3x
1x
OK =
1x
/
Language
Mode
English
Photo + Video
Setup
x6
Brightness
Contrast
050
050
Date YYYY - MM - DD
Time 00 : 19
Setup
3x
1x
OK =
1x
/
Language
Mode
English
Photo + Video
Setup
x7
11
EN
DE
FR
ES
IT

Browsing photos:
Deleting photos:
For photos stored in internal memory, the oldest previous photos will be automatically
deleted if memory space is limited. If you wish to permanently save photos, please
copy them to an SD card. SD cards up to 32gb are supported.
Copying photos to an SD card:
!
2x
View
Delete
Copy
Photos
Delete ?
Yes
No
1x
View
Delete
Copy
Photo
1x
1x
View
Delete
Copy
Photo
1x
3x
View
Delete
Copy
Photos
View
Delete
Copy
Photo
1x
YYYY/MM/DD HH:MM:SS
1x
View
1x
Delete
Copy
Photos
SS:MM:HHDD/MM/YYYYSS:MM:HHDD/MM/YYYY
SS:MM:HHDD/MM/YYYYSS:MM:HHDD/MM/YYYY
...
/
12
EN
DE
FR
ES
IT

Browsing videos:
Deleting videos:
5.3 Setting video duration:
Video duration times of 10s, 20s, and 30s can be set.
YYYY/MM/DD HH:MM:SS
1x
SS:MM:HHDD/MM/YYYYSS:MM:HHDD/MM/YYYY
SS:MM:HHDD/MM/YYYYSS:MM:HHDD/MM/YYYY
...
/
2x
Play
Delete
Time 10
Video
x1
Play
Delete
Time
Video
10
!
Delete ?
Yes
No
1x
2x
Play
Delete
Time 10
Video
x2
Play
Delete
Time
Video
10
View
Delete
Copy
Photo
1x x3
Play
Delete
Time
Video
10
1x
Play
Delete
Time
Video
10
/
10 -> 20 -> 30 sec.
13
EN
DE
FR
ES
IT

5.4 Adjusting monitor brightness and contrast:
5.5 Setting monitor date and time:
Brightness
Contrast
050
050
Date YYYY - MM - DD
Time 00 : 19
Setup
3x
= + = -
1x
OK = 1x
Brightness
Contrast
050
050
Date YYYY - MM - DD
Time 00 : 19
Setup
x1
Brightness
Contrast
050
050
Date YYYY - MM - DD
Time 00 : 19
Setup
3x
= + = -
1x OK = 1x
Brightness
Contrast
050
050
Date YYYY - MM - DD
Time 00 : 19
Setup
x2
Brightness
Contrast
050
050
Date YYYY - MM - DD
Time 00 : 19
Setup
3x
Brightness
Contrast
050
050
Date YYYY - MM - DD
Time 00 : 19
Setup
x3
MM
OK =
= + = -
1x
DD
OK =
= + = -
1x
YYYY
OK =
= + = -
1x
1x
MM
OK =
= + = -
1x
HH
OK =
= + = -
1x
1x
Brightness
Contrast
050
050
Date YYYY - MM - DD
Time 00 : 19
Setup
3x
Brightness
Contrast
050
050
Date YYYY - MM - DD
Time 00 : 19
Setup
x4
14
EN
DE
FR
ES
IT

● Do not install the indoor video monitor in a high temperature, high humidity place or near a
TV.
● Do not touch the monitor’s screen with wet hands.
● The outdoor video doorbell is weather resistant (IP rated IP44). However do not spray high
pressure water directly on it as excessive moisture may cause problems with the unit.
● Please use only soft cloth to clean the monitor’s screen and doorbell camera in order to
receive a clear image. Please do not use dishwashing liquid, lacquer diluents, or corrosive
liquid.
● Please avoid throwing or hitting the monitor and doorbell.
● Doorbell video/camera images may be illegible if a strong light is shined directly in the
camera.
● Don’t pry the unit or make short circuits.
Technical Specifications:
Maintenance:
Power
Display
Transmission Method
Ring Tone
Operating Distance
Operating Temperature
Operating Humidity
Dimensions (W/H/D)
Image Resolution
Active Area
Input: AC110-240V, 60-50Hz Output: DC15V, 1200mA
7’’ TFT- LCD
2 wires
16 different poly-phonic melodies
100 meters maximum from doorbell to farthest monitor
-10ºC to 40ºC (14ºF to 104ºF)
Less than 90%
235mm x 128mm x 25mm (9.25in x 5.03in x 0.98in)
480 x 234 dots
154.1(H) × 86.58(V)
Indoor video monitor
Power
Camera
Night Vision
Operating Temperature
Operating Humidity
Dimension (W/H/D)
DC15V 1200mA by monitor
CMOS 600Tvls
6 LED’s
-20°C~50°C
Less than 90%
109mm X 161mm X 61.5mm (including the rain cover)
Outdoor video doorbell
15
EN
DE
FR
ES
IT

Disposal of the appliance
Under no circumstances should you dispose of the appliance in normal
domestic waste. This product is subject to the provisions of European
Directive 2012/19/EU.
The appliance’s packaging is made from environmentally friendly
material and can be disposed of at your local recycling plant.
Dispose of the appliance via an approved disposal company or your municipal waste
facility. Please observe currently applicable regulations. Please contact your waste
disposal center if you need any further information.
Disposal
16
EN
DE
FR
ES
IT

6mm
7x 7x
1 x Innenmonitor 1 x Adapter
1 x Außenmonitor 1 x Regenschutz für die Türklingel
7 x Schrauben und Plastikdübel 1 x Halterung für den Monitor
1 x Bedienungsanleitung 1 x 15m Kabel
1 x Inbusschlüssel
5m
6mm
Werkzeug benötigt, aber nicht inklusive, um die Türklingel zu befestigen
17
Sollte etwas in Ihrem Paket fehlen oder das Paket beschädigt sein, melden Sie sich bitte umgehend
bei https://www.1byone.com/Support
EN
DE
FR
ES
IT

2 1
4 3
Teilebeschreibung
Stromanzeige
Menü
Lautsprecher
Anschlüsse
Stromanschluss
Anschluss
SD Kartenslot
18
Mikrofon
Nutzungsanzeige
Türöffner
Monitor
Entriegeln
Sprechen
7” TFT LCD Bildschirm
Beenden
Hoch
Runter
Lautstärkeknopf
Mikrofon
IR LED
Kamera
Lautsprecher
Anruf-Knopf
Lautstärkeregler
EN
DE
FR
ES
IT

Installation
Die Außenanlage anbringen
1. Befestigen Sie den Regenschutz mit Schrauben an der Wand.
2. Entfernen Sie die Schraube an der Unterseite der Anlage mit dem Inbusschlüssel und
entfernen Sie die vordere Abdeckung.
19
ø6mm
80mm
127mm
1 2
4 5
3
EN
DE
FR
ES
IT