3D Histech PANNORAMIC DESK FLASH DX User manual

PANNORAMIC® DESK FLASH DX
INSTRUCTIONS FOR USE
FOR INVESTIGATIONAL USE ONLY. THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.

PANNORAMIC® DESK FLASH DX
ABOUT THESE INSTRUCTION FOR USE
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
1
Table of Contents
Table of Contents 1
Disclaimer 4
Declaration of Conformity and Compliance 6
Notes on Warranty 7
1About These Instruction for Use 8
2Introduction 9
Intended Use 9
Labeling Limitations 10
Compatibility 10
Services and Maintenance 11
Compliance 12
Required Training 12
Contact Information 12
3Operational Safety 13
Safety Instructions 13
Emergency Procedure 15
Electrical Safety 15
Transportation Safety 17
Mechanical Safety 17
Fire and Combustion Safety 18
Electromagnetic Compatibility 19
Biohazard Safety 19
Cleaning Safety 19
Liquids and Safety 20
Security 20
Labels and Symbols on the Scanner 21
Labels 21
Symbols 22
4Pannoramic® DESK FLASH DX Software Overview 23
About the Pannoramic® DESK FLASH DX and PANNORAMIC® Diagnostic Scanner Software 23
System Configuration 24
Hardware Configuration 25
Accessories 26

PANNORAMIC® DESK FLASH DX
ABOUT THESE INSTRUCTION FOR USE
2
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
5User Interface 27
Starting the Control PANNORAMIC® Diagnostic Scanner Software 27
Exiting the Control PANNORAMIC® Diagnostic Scanner Software 28
Logging in 28
Description 29
Slide View 30
Event History 33
Settings 35
6Operation 46
Introduction 46
Safety 46
Image quality 46
Scanner On/Off 47
Connecting the Scanner 47
Switching the Scanner on 47
Switching the Scanner off 48
Emergency shutdown 48
Power failure 48
Loading the Scanner 48
Preparation of glass slides 48
Inserting a glass slide in the Scanner 55
Initiating the Scanning Process 56
Aborting the Scanning Process 56
Unloading the Scanner 56
Removing the Slide from the Scanner 56
Checking the Scan Results 57
Checking the Status of the Scanner 57
7Troubleshooting 58
Introduction 58
Event Logging 58
Failed to log in 58
If the Scanner Cannot Read the Barcode on the Label Area 59
If the Scanner Shuts Down Automatically Before All Slides Have Been Scanned 60
If a Warning or Error Message Appears on the User Interface 60

PANNORAMIC® DESK FLASH DX
ABOUT THESE INSTRUCTION FOR USE
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
3
If Interaction with the User Interface is Unavailable 60
8Maintenance 61
Introduction 61
Planned Maintenance 62
Routine User Checks Program 62
How to Access Logged Events 63
Cleaning 65
Preparation 65
Tools for Cleaning 65
Cleaning the Covers 65
9Product Disposal 66
Introduction 66
Passing the Scanner on to Another User 66
Final Disposal of the Scanner 66
10 Technical Data 67
Glossary of Terms and Abbreviations 71

PANNORAMIC® DESK FLASH DX
ABOUT THESE INSTRUCTION FOR USE
4
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
Disclaimer
Copyright © 2001-2020 3DHISTECH Ltd.
All rights reserved.
Intellectual property related to the 3DHISTECH products are as follows:
•P1300124; PCT/HU2014/000020; EP 14745228.8.; US 14/771.380
•P0700404; PCT/HU2008/000065; EP 08762668.5.; US 12/663.537
•P1700279; PCT/HU2018/050030
•P1700483
•P1500394; PCT/HU2016/050039; EP 16840280.8.; US 15/756.370
•P0700409; US 2008/0306964
•P0800181; PCT/HU2009/000027; EP 09721248.4.
•P0600435; PCT/HU2007/000047; EP 2024772; US 12/301.781
•P0600177; PCT/HU2007/000018; EP 1.994.398; US 12/281.566
•P0900741; PCT/HU2010/000130; EP 10812989.1.
•P0900142; PCT/HU2010/000027; EP 10726183.6
•P101036; PCT/IB2005/050351; EP 1789831; US 7.663.078
•P0301911; PCT/HU04/00019; EP 1644767; US 7327515
The above-mentioned granted patents, granted utility model, registered trademarks, pending
international and national patent applications and the other corresponding IP are the sole
properties of the 3DHISTECH Ltd.
3DHISTECH Ltd. is not liable for damage of whatever nature (including, but not limited to,
general or specific damage, indirect damage, consequential damage or incidental damage,
including the results of the analysis of the digitized slides, for example, change of health status
related to erroneous diagnosis from the digitized slide(s)) that stems from or is associated with
use of Product, digitized slides, quality of staining, quality of stained slides, quality of used
method of staining. 3DHISTECH Ltd. assumes no responsibility for the functionality and fault-
free condition of your “application programs” (Workflows, VBA macros, Commander scripts).
CAUTION
The performance evaluation is pending for the Pannoramic®Pathology Management System.
This product has not been approved or cleared as a medical device by the U.S. Food and Drug
Administration.
Do not use this device in close proximity to sources of strong electromagnetic radiation (e.g.
unshielded intentional RF sources), as these may interfere with the proper operation.

PANNORAMIC® DESK FLASH DX
ABOUT THESE INSTRUCTION FOR USE
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
5
Third-party disclaimer
3DHISTECH Ltd. is not liable for damage of whatever nature (including, but not limited to, general
or specific damage, indirect damage, consequential damage or incidental damage, including
damage resulting from lost profits, interruption of business, loss of business information,
pecuniary loss or similar damage) that stems from or is associated with the incorporated part of
this Product that is made by a third-party company.
THE SOFTWARE IS PROVIDED “AS IS” AND WITHOUT WARRANTY OF ANY KIND, EXPRESSED,
IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Further Information
For the latest information on 3DHISTECH products and services, please visit our website at the
following URL: http://www.3dhistech.com.
Company Address
Öv utca 3.
1141 Budapest –HUNGARY

PANNORAMIC® DESK FLASH DX
ABOUT THESE INSTRUCTION FOR USE
6
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
Declaration of Conformity and Compliance
The product complies with relevant international and national standards and laws.
3DHISTECH Ltd. declares that the product Pannoramic® DESK FLASH DX is designed and
produced with consideration of specified requirements according to the ISO13485 Medical
devices. Quality management systems. Requirements for regulatory purposes (ISO 13485:2016).
IEC/UL 61010-1:2010 –“Safety Requirements for Electrical Equipment for Measurement, Control
and Laboratory Use –General requirements”
IEC/UL 61010-2-081:2019 –“Safety Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use –Part 2-081: Particular requirements for automatic and semi-
automatic laboratory equipment for analysis and other purposes”
IEC/UL 61010-2-101:2018, “Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use –Part 2-101: Particular requirements for in vitro diagnostic (IVD)
medical equipment”
IEC 61326-2-6:2012, “Electrical equipment for measurement, control and laboratory use - EMC
requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment.”
The symbol on the Pannoramic® DESK FLASH certifies that the product fully complies with
Directive 2014/30/EC and has passed the appropriate tests.
There is no further operator (user) action required in case of residual risks.
Further information may be obtained from the manufacturer:
[e-mail]

PANNORAMIC® DESK FLASH DX
ABOUT THESE INSTRUCTION FOR USE
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
7
Notes on Warranty
3DHISTECH Ltd. –as the Product Manufacturer –warrants the Pannoramic® DESK FLASH DX
to be free from faults in material and workmanship at the moment of installation. Defects
must be notified immediately on identification and maximum efforts must be undertaken in
order to the amount of damage as small as possible. On receiving notice of a fault, the Product
Manufacturer will be under obligation to remove the fault, at his own option, either by
providing adequate repair services or by delivering a faultless product for replacement. No
warranty will be accepted in cases of natural wear (notably, wear and tear parts) or improper
product handling.
The Product Manufacturer will refuse any liability in the event of damage resulting from faulty
operation, negligence or unauthorized intervention into the product, notably, from the
replacement of product parts or the usage of accessory parts from other manufacturers. Any
such case will void the user’s claim for warranty.
Except for action which is explicitly described in this manual, you are prohibited from
performing any kind of maintenance or repair work at the Pannoramic® DESK FLASH DX. Only
3DHISTECH Service personnel or specifically authorized representatives are allowed to handle
repair work. In case of malfunction, contact the 3DHISTECH Service Support first.

PANNORAMIC® DESK FLASH DX
ABOUT THESE INSTRUCTION FOR USE
8
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
1About These Instruction for Use
The purpose of this manual is to assist users in the safe and reliable operation of the Pannoramic®
DESK FLASH DX. Before operating the Scanner, you must read this manual, and adhere to all
Warning! and Caution! notices. The manual must be kept in the immediate vicinity of the Scanner
so that it is accessible at any time.
The following character formats and symbols call your attention in this manual:
Example (text in bold)
Words or characters that appear on the screen. These include field names, screen and window
titles, push-button and menu names, paths or options. Keys on the keyboard. For example,
function keys (such as F11) or the Ctrl+S hotkey.
Example (text in bold and italics)
Cross-references within this document or to other documents.
Warning!
Can cause irreversible damage or harm to the user of the product or the product itself if this
instruction is not followed.
Caution!
Can cause the product to not work properly if this instruction is not followed and alerts to a
potentially critical situation.
Notice:
Calls attention to some important information or feature.
Special attention should be paid to all information provided and the procedures described in
chapter Safety Instructions.

PANNORAMIC® DESK FLASH DX
INTRODUCTION
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
9
2Introduction
About the Product
The Pannoramic®Whole Slide Imaging (WSI) system is used as an aid to the pathologist to
review and interpret digital images of surgical pathology slides prepared from formalin-fixed
paraffin embedded (FFPE) tissue, cytology smear/specimen, peripheral blood smear, HE
(hematoxylin eosin stained) tissue, IHC labeled tissue, or frozen section. The Pannoramic®WSI
system consist of a Scanner, image management system (store, view, and analyze images),
and monitor. These systems utilize optical, mechanical, electronic, and software elements to
scan FFPE tissue, cytology specimen, or frozen section mounted on glass slides at a resolution
of at least 0.24 μm per pixel to create digital whole slide images. The system is designed to be
connected over a network within a hospital/clinic in which the Scanner, image management
system, and monitor can be in separate locations if desired. The pathologist workstation with
access to the IMS and Monitor will either be in the pathology lab or in the pathologist office.
Figure 1: Pannoramic®Whole Slide Imaging System including the Scanner, IMS, and Monitor
Intended Use
The 3DHISTECH whole slide imaging system is an automated digital slide creation, viewing, and
management system. The system is intended for in vitro diagnostic use as an aid to the
Notice:
The scope of this Instructions for Use is only the Pannoramic®DESK FLASH DX. Some
sections briefly describe the use the Scanner in correlation to the IMS/Monitor, but the user
should reference to the Monitor and Pannoramic®Image Management System for additional
details.
Notice:
The product can only be installed and repaired by a Service Technician or Engineer approved
by 3DHISTECH.

PANNORAMIC® DESK FLASH DX
INTRODUCTION
10
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
pathologist to review and interpret digital images of surgical pathology slides prepared from
formalin-fixed paraffin embedded (FFPE) tissue, cytology smear/specimen, peripheral
blood smear, HE (hematoxylin eosin stained) tissue, IHC labeled tissue, or frozen section.
The 3DHISTECH whole slide imaging system comprises the Image Management System, the
Scanner, and Monitor. The system is for creation and viewing of digital images of scanned glass
slides that would otherwise be appropriate for manual visualization by conventional light
microscopy. It is the responsibility of a qualified pathologist to employ appropriate procedures
and safeguards to assure the validity of the interpretation of images obtained using the system.
Warning!
Use of this product for purposes other than those intended by the manufacturer, as well as
incorrect use or operation, may relieve the manufacturer from all or some responsibility for
resultant non-compliance, damage, or injury. This shall also apply to service or repair work of
any kind, which is performed by other than authorized service personnel. All claims for
warranty and warranty services will be null and void in any such case.
Warning!
The Pannoramic® DESK FLASH DX must be operated by a properly trained person only.
Operating personnel must be fully aware of the potential dangers which a particular field of
application involves. The Pannoramic® DESK FLASH DX is a precision instrument which may
suffer a significant reduction in operational functions or even physical destruction following
intervention performed in any nonconforming manner.
Labeling Limitations
•The Pannoramic®WSI systems allows pathologist to perform diagnosis on digital images
of scanned glass slides, provided the Pannoramic® DESK FLASH DX, IMS, and Monitor are used
with a user managed network with connectivity of at least 100 Mbps.
•Clinical performance of the device was not evaluated for all possible tissues and
diagnoses. Visit chapter Specific Performance Characteristics for more information.
•There are pre-analytical factors such as tissue thickness, tissue folds, staining quality and
intensity, etc. that have effect on image quality. If the quality of the images causes the
pathologist to have uncertainty about the accuracy of a diagnosis, then the pathologist should
examine the corresponding glass slide by conventional methods before rendering a diagnosis.
Compatibility
Ancillary equipment, accessories, and components may only be used with the Pannoramic®
DESK FLASH DX system that are recognized by 3DHISTECH as compatible.

PANNORAMIC® DESK FLASH DX
INTRODUCTION
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
11
Warning!
Any modification to a hardware or software component of the PC will highly affect the
functionality of the Scanner program.
Warning!
Do NOT install any other application on the Pannoramic® DESK FLASH DX control computer
other than the Scanner control software and its auxiliary drivers.
Warning!
The use of third-party antivirus programs is NOT recommended and can affect the operation
of the Scanner and software.
Services and Maintenance
Modifications, parts replacements, or repairs to the Pannoramic® DESK FLASH DX must
be performed only by service technicians authorized by 3DHISTECH, a contracted third-
party company, or distributor. Service technicians must have the proper training to carry
out the necessary modification/servicing of the device. Modifications and/or additions to
the system must be performed in accordance with applicable laws and regulations (as
legally required by the relevant jurisdictions) and in compliance with best engineering
practices.
In the event of any non-conforming type of use, including non-conforming use of
assemblies or single parts, no liability will be assumed by the Manufacturer. This shall
also apply to service or repair work of any kind, which is performed by other than
authorized service personnel. All claims for warranty and warranty services will be null
and void in any such case.
Modifications and/or additions to the device made by persons without proper training
and/or the use of unapproved parts will void the warranty. As this device being a
complex technical equipment, maintenance by unqualified personnel and/or the use of
unapproved parts can pose a serious risk of equipment damage and personal injury.

PANNORAMIC® DESK FLASH DX
INTRODUCTION
12
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
Compliance
The product complies with relevant international and national standards and laws. Conformity
information can be provided by 3DHISTECH or your local 3DHISTECH representative upon
request (refer to section Contact Information for details.)
Required Training
It is the responsibility of the owner (individual, group, company) of the Pannoramic® DESK
FLASH DX to ensure that all users of the equipment are properly trained in accordance with
local laws or regulations before using the system. Please, contact 3DHISTECH or your local
3DHISTECH representative for more information on training.
Contact Information
3DHISTECH Ltd.
Öv u. 3 – 1141 Budapest
HUNGARY
www.3dhistech.com
E−mail: [e-mail]

PANNORAMIC® DESK FLASH DX
OPERATIONAL SAFETY
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
13
3Operational Safety
Safety Instructions
The below chapter of this Instructions for Use contains information and warnings of a kind
that must be followed by owner/operator personnel to maintain the safe use and solid
performance of the device.
The Pannoramic® DESK FLASH DX, including any of its original accessory components, should
not be operated in any other way than described in chapter Intended Use. Any of the following
notes and warning symbols used on the Pannoramic® DESK FLASH DX must be strictly
observed:
Warning!
Image quality and performance
It is strictly prohibited to operate the device other than specified by the manufacturer;
otherwise, if operating the device by not observing warnings, cautions and instructions, the
level of safety, the quality of the acquired image, and the performance of the Scanner will
decrease.
Warning!
Maintenance and Errors
If any part of the Scanner is found or likely to be defective or maladjusted, it is forbidden to
use the Scanner until the necessary repairs have been made, otherwise, operating the
Scanner with defective or misaligned components can cause fatal or other serious personal
injury or lead to clinical misdiagnosis or mistreatment.
Warning!
Safety awareness
The Scanner can be operated only if you have read, and understood all of the safety
information, safety procedures, and emergency procedures detailed in this section. Using
the Scanner without proper knowledge of its safe use can result in death or other serious
personal injury, and can also lead to clinical misdiagnosis or mistreatment.

PANNORAMIC® DESK FLASH DX
OPERATIONAL SAFETY
14
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
Warning!
Safety components
The safety components (locking mechanisms and locks) are essential parts of the Scanner,
and it is strictly prohibited to override, alter, or remove such components. Using the Scanner
without safety components can result in death or other serious personal injury, and can also
lead to clinical misdiagnosis or mistreatment.
Warning!
Intended use and compatibility
It is strictly prohibited to use the Scanner for any purpose other than for which it is
intended, and with any device or equipment other than those 3DHISTECH recognizes as
compatible. If the Scanner is used for unintended purposes, or it is used with incompatible
device or equipment, can result in death or other serious personal injury, and can also lead
to clinical misdiagnosis or mistreatment.
Warning!
Pannoramic® DESK FLASH DX does not include any special devices for protection against
samples that are corrosive, potentially infectious, toxic, radioactive or otherwise harmful to
health. When handling such samples, you are required to comply with all currently binding
legislation, namely national accident prevention regulations.
Warning!
A defective Pannoramic® DESK FLASH DX is not classified as domestic waste. It must be
properly disposed in accordance with currently valid legal requirements.

PANNORAMIC® DESK FLASH DX
OPERATIONAL SAFETY
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
15
Caution!
The Pannoramic® DESK FLASH DX must be positioned that it is easy to access, operate, and
disconnect the device if necessary.
Notice:
The safety level of the equipment after servicing will be identical with level of the original
equipment.
Emergency Procedure
In case of emergency, the power cord should be unplugged from the power outlet.
Warning!
The power outlet and plugs should be easily accessible at all times.
Electrical Safety
Warning!
Cables, fuses and covers
Remove cables, or fuses and/or open the housing only if you are instructed to do so by the
control software or it is required during a service, cleaning or maintenance task (performed
according to this IFU). The removal of cables, or opening the housing can be performed only
by trained, qualified, and authorized personnel. Only compatible cables can be used to the
Scanner. See chapter Technical data for more details on specifications.

PANNORAMIC® DESK FLASH DX
OPERATIONAL SAFETY
16
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
Warning!
Check cables, plugs and connections before operation, and if defective or cannot be
replaced, contact 3DHISTECH Service for support.
Warning!
Check that your local line voltage is compatible with Pannoramic® DESK FLASH DX
specifications before you turn power on. The device can operate at line voltages 100V to
240V and 50/60 Hz.
Warning!
Only plug the device in a socket with protective grounding (earth) contact. The
Pannoramic® DESK FLASH DX has a built-in protection which must not be rendered
ineffective by extension cables without protective (earth-ground) conductor.
Warning!
If protective devices are found to be ineffective, the Pannoramic® DESK FLASH DX must be
shut down and precautions must be taken to prevent unintended usage. For necessary
repair work or work to restore proper operating condition, you should contact the
3DHISTECH Service.
Warning!
Preparing for servicing, cleaning, and maintenance
Disconnect plug!
Remember to unplug the power cord before opening the housing of the Pannoramic® DESK
FLASH DX in case servicing, cleaning and/or maintenance tasks must be performed.

PANNORAMIC® DESK FLASH DX
OPERATIONAL SAFETY
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
17
Warning!
Only connect external devices that are safety extra low voltage rated to the instrument to
avoid the risk of electrical shock.
Warning!
Use of this instrument in an environment where air humidity is below 35%, especially if
synthetic materials are present (synthetic clothing, carpets, etc.) may cause damaging
electrostatic discharges that may cause erroneous results.
Transportation Safety
Warning!
The Scanner should not be moved after installation. Contact 3DHISTECH Service if the
Scanner must be moved to another location.
Mechanical Safety
Warning!
Covers
The housing of the Scanner can be opened only by a properly trained operator or
3DHISTECH service technicians.

PANNORAMIC® DESK FLASH DX
OPERATIONAL SAFETY
18
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
Warning!
Sharp edges
Whenever you are handling magazines during loading and removing from the Scanner, or
you are instructed to open the housing to remove a glass slide from the Scanner, always
make sure that the necessary precautions are taken. Those areas and units of the Scanner
where you must operate cautiously are marked with the following stickers:
Pinch point hazard area
Operate with care
Watch out for pinch points or areas and sharp edges to prevent injury, cuts or bruises. Glass
splinters of broken slides can be present in the Scanner –be careful when removing
splinters, and always wear protective gloves.
Caution!
Precision instrument
The Pannoramic® DESK FLASH DX is a precision medical device that must be operated with
care and in accordance with the instructions in this IFU. Avoid external shocks and vibrations
and accidental influences to a maximum possible degree, as such phenomena can affect and
reduce performance and the expected lifespan of the Scanner. Dirt or dust may adversely
impact the operating capability of the Scanner. For this reason, measures must be taken to
eliminate such influences to a maximum possible degree. During periods of non-use, the
Pannoramic® DESK FLASH DX must be protected with a dust cover. Check that power is
turned off before you put the cover on.
Fire and Combustion Safety
Warning!
The operation of the instrument in explosion-risk environments is not allowed. Do not use
flammable or potentially explosive cleaning sprays, as the resulting vapor may ignite,
causing fatal or other serious personal injury and/or equipment damage.

PANNORAMIC® DESK FLASH DX
OPERATIONAL SAFETY
INFORMATION FOR USE –FOR INVESTIGATIONAL USE ONLY.
THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.
19
Warning!
Location-specific fire regulations must be observed and applied. It is required to install fire
extinguishers in the location in accordance with the regulations. Operators and users of this
Scanner must be fully aware of the necessary steps that must be taken and how to use fire
extinguishers in case of fire.
Do NOT use water, other fluids or materials to extinguish electrical fire, as it could lead to
fatal or serious injuries or death.
Electromagnetic Compatibility
The Pannoramic® DESK FLASH DX is tested and complies with the standard IEC 61010.
Biohazard Safety
Warning!
Do not use the Scanner for slides with biohazardous materials.
Warning!
Slides that are not used any longer do not classify as domestic waste and must be treated as
hazardous materials and disposed in compliance with the currently valid legal requirements.
Cleaning Safety
Warning!
Switch the power off before performing cleaning tasks.
The cleaning procedures described in chapter 10 Maintenance should be followed.