3D Histech SCAN 150 BF Reference manual

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
1
SERVICE BULLETIN
Scan 150 BF/FL installation guide
March 23, 2020
1. Preparing the Workstation:
Note: All the plugs and cables are labeled, connect accordingly!
1.1 Unpack the Dell Precision 5820 Tower XCT workstation (AC-PCC-DL5820T-01).
1.2 Connect the power supply cable to the workstation and the power outlet.
1.3 Connect the mouse and keyboard.
1.4 Connect the Display port mini Display port adapter.
1.5 Unpack the Fujitsu Display (AC-PCM-MON-27UHD).
1.6 Connect the power supply cable to the display and the power outlet.
1.7 Connect the Display port cable to the mini Display port adapter (see step 1.4).
1.8 Plug in both HASP local dongle units (AC-LIC-HAS-010000).
2. Assembling the Scanner Unit:
2.1 Unpack the scanner unit (SCAN 150 BF/FL - SI2FGHM0001009SOL1) and put it on a steady
surface (preferably a professional lab desk to eliminate vibration).

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
2
2.2 Connect the 2 Microscope USB cables to the scanner and the workstation according to the labels.

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
3
2.3 Mount the camera adapter (HP-SCA-ADPCM100) to the Grasshopper camera
(AC-SCO-GHM-0100).

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
4
2.4 Remove the protective cover from the camera tube and mount the assembled camera + adapter to
the scanner.

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
5
Tip: try to mount the camera in an angle close to the one in the image below this will make the
camera rotation setting easier:

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
6
2.5 Connect the Grasshopper 3 51S5M Trigger Cable to the camera and the back of the scanner.

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
7
2.6 Connect the Camera to the workstation with the USB 3.0 cable (AC-PCA-USB-0500).
Important: Use tha labeled USB 3.0 slot on the workstation!

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
8

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
9
2.7 Connect the power supply cable (AC-MIC-PWS-MPU100A) to the DEHNER power supply
(AC-MIC-PWS-MPU100A) and then to the scanner.

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
10
2.8 Mount the camera protector rail (HP-SCA-COV-CPSO00) to the scanner.

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
11
2.9 Open the 4 locks at the baseplate of the scanner with the 10' wrench.

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
12
2.10 Gently remove the cover (see the video: Cover_removal.mp4
https://www.3dhistech.com/data/sup014/support_download/Vietnam/Cover_removal.MP4 ).

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
13
2.11 Insert the FL filters to the turret wheel in the following order: 1. DAPI Zero 2. SP Green Zero 3.
SP Orange Zero (see the video: Insert_filter.mp4
https://www.3dhistech.com/data/sup014/support_download/Vietnam/Insert_filter.MP4 ).

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
14
Important!
Make sure the scanner is not powered on while inserting the filters! The filter wheel can be
moved manually only if the instrument is not powered on.
Make sure the filter is inserted in the direction indicated on the images!
Make sure you DO NOT touch the lenses! The surface is very sensitive; any damage or
contamination will result in loss of scan quality!
2.12 Gently put the cover back and close the 4 locks (see step 2.9 and 2.10).

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
15
3. Assembling the FL light source:
3.1 Unpack the SOLA SM II 365 light source (HP-SCA-SOL-0100).
3.2 Connect the power supply cable (AC-MIC-PWS-MPU100A) to the SOLA power supply.

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
16
3.3 Connect the SOLA power supply to the SOLA SM light source.
3.4 Mount the LLG-Microscope side adapter (AC-SPA-LLG-000300) to the turret wheel of the
scanner.

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
17

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
18
3.5 Connect the scanner to the SOLA light source with the Lightguide for Lumencor (HP-250-LUM-
01000) optical cable).

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
19

S o l u t i o n
resides in the
d e t a i l s
Certified company Address: No. 3 Öv Street, 1141 Phone: [phone] [e-mail]
ISO 13485:2003 / ISO 9001:2008 Budapest, HUNGARY Fax: [phone] www.3dhistech.com
20