3M X95 - Digital Projector XGA LCD Operating manual

Digital Projector
X95
Product Safety Guide
X95 Projecteur numérique - Guide de Sécurité de Produit
X95 Digitalprojektor - Sicherheitsanleitung des Geräts
X95 Proyector digital - Guiá de Seguridad del Producto
X95 Proiettore digitale - Guida di Sicurezza del Prodotto
X95 Digitale Projector - Veiligheidsgids op Product
X95 Projector Digital - Guia da Segurança de Produto
X95 Digital projektor- Bruksanvisning för Produktsäkerhets
X95 ຕஓཨᆖ!.!ׂ೗Ҿඇኸళ
X95 디지털 프로젝터 - 제품 안전 가이드
X95 Digitaalinen projektori - Laitteen turvaohjeet

3M™ Digital Projector X95 Product Safety Guide © 3M 20072
Table of Contents
ENGLISH
Safety Information ........................................................................................................................................5
Product Safety Labels ...................................................................................................................................9
Lamp ...........................................................................................................................................................10
Remote control.............................................................................................................................................13
Replacing Internal Clock battery .................................................................................................................14
Inserting an SD Card and USB memory......................................................................................................15
3M™ Digital Projector Limited Warranty ..................................................................................................16
FRANÇAIS
Mesures de sécurité......................................................................................................................................18
Autocollants de sécurité sur le produit.........................................................................................................22
Lampe ..........................................................................................................................................................23
Télécommande.............................................................................................................................................26
Remplacement de la pile d’horloge interne .................................................................................................27
Insérer une Carte SD et une Mémoire USB.................................................................................................28
3M™ Projecteur Numérique Garantie Limitée ...........................................................................................29
DEUTSCH
Sicherheitsanweisungen...............................................................................................................................31
Sicherheitsaufkleber.....................................................................................................................................35
Lampe ..........................................................................................................................................................36
Fernbedienung..............................................................................................................................................39
Austausch der internen Uhrbatterie .............................................................................................................40
Einsetzen einer SD-Karte und eines USB-Speichers...................................................................................41
Beschränkte Gewährleistung für 3M™ Digitalprojektor.............................................................................42
ESPAÑOL
Infomación de seguridad..............................................................................................................................44
Etiquetas de seguridad del producto ...........................................................................................................48
Lámpara .......................................................................................................................................................49
Control remote .............................................................................................................................................52
Reemplazo de la pila del reloj interno .........................................................................................................53
Inserción de una tarjeta SD y USB Memory ...............................................................................................54
Garantía limitada del Proyector Digital 3M™.............................................................................................55
ITALIANO
Informazioni sulla sicurezza ........................................................................................................................57
Etichette di sicurezza del prodotto...............................................................................................................61
Lampada.......................................................................................................................................................62
Telecomando ................................................................................................................................................65
Sostituzione della batteria dell'orologio interno ..........................................................................................66
Inserimento di una scheda SD e memoria USB...........................................................................................67
Proiettore digitale 3M™ garanzia limitata...................................................................................................68
NEDERLANDS
Veiligheidsinformatie...................................................................................................................................70
Veiligheidslabels ..........................................................................................................................................74
Lamp ............................................................................................................................................................75
Afstandsbediening........................................................................................................................................78
Vervanging Interne Klok batterij .................................................................................................................79
Plaatsen van een SD Kaart en USB Geheugen ............................................................................................80
3M™ Digitale Projector Beperkte Garantie ................................................................................................81

3M™ Digital Projector X95 Product Safety Guide© 3M 2007
3
Table of Contents
ENGLISHSUOMI
PORTUGUÊS
Informações sobre Segurança ......................................................................................................................83
Etiquetas de Segurança do Produto..............................................................................................................87
Lâmpada.......................................................................................................................................................88
Controlo remoto...........................................................................................................................................91
Substituição da pilha do Relógio Interno.....................................................................................................92
Inserir um Cartão de Memória SD e Memória USB....................................................................................93
Garantia Limitada do Projector Digital 3M™ ............................................................................................94
SVENSKA
Säkerhetsinformation ...................................................................................................................................96
Produktsäkerhetsetiketter...........................................................................................................................100
Lampan ......................................................................................................................................................101
Fjärrkontroll ...............................................................................................................................................104
Byte av batteri för den interna klockan......................................................................................................105
Sätt i ett SD-kort eller ett USB-minne .......................................................................................................106
3M™ Digital projektor Begränsad garanti ................................................................................................107
ዐ࿔
Ҿඇ႑တ....................................................................................................................................................109
ׂ೗ҾඇՔധ............................................................................................................................................113
ڨಟ............................................................................................................................................................114
ᄫഗ........................................................................................................................................................117
߸࣑ాዃ้ዓڦۉ׾................................................................................................................................118
֭෇ TE ࢅ VTC ٪ئഗ..........................................................................................................................119
4NUN!ຕஓཨᆖᆶ၌ԍႪ .......................................................................................................................120
한국어
안전 정보 ..................................................................................................................................................122
상품 안전 라벨.........................................................................................................................................126
램프............................................................................................................................................................127
리모컨........................................................................................................................................................130
내부 시계 배터리 교체하기....................................................................................................................131
SD 카드와 USB 메모리 삽입하기........................................................................................................132
3M ™ 디지털 프로젝터 유한 보증.......................................................................................................133
SUOMI
Tietoja turvallisuutta varten .......................................................................................................................135
Laitteen turvakyltit.....................................................................................................................................139
Lamppu ......................................................................................................................................................140
Kaukosäädin...............................................................................................................................................143
Sisäisen kellon pariston vaihto...................................................................................................................144
SD-kortin ja USB-muistin asettaminen .....................................................................................................145
3M™ Digitaalisen projektorin rajoitettu takuu..........................................................................................146

3M™ Digital Projector X95 Product Safety Guide © 3M 20074
ENGLISH

3M™ Digital Projector X95 Product Safety Guide© 3M 2007
5
ENGLISH
Safety Information
Read, understand, and follow all safety information contained in the
“Product Safety Guide” and in the “Operator’s Guide” prior to using
the X95 Projector. Service personnel must also read and
understand the safety information contained in the “Service Manual”.
Retain these instructions for future reference.
Intended Use
The 3M™ Digital Projector X95 was designed, built and tested for use
indoors, using 3M brand lamps, 3M brand ceiling mount hardware and nominal
local voltages. This projector is not intended for household use or use by children.
The use of other replacement lamps, outdoor operation or different voltages has
not been tested and could damage the projector or peripheral equipment and/or
create a potentially unsafe operating condition.
Explanation of Signal Words and Symbols in Safety Labels and Instructions
WARNING: Indicates a potentially hazardous situation, which if not
avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation, which if not
avoided, may result in minor or moderate injury.
Warning: Hazardous Voltage
Warning: Hazardous High Temperature
Warning: High Pressure
Caution: Laser Radiation
Attention: Refer to Safety Instructions in Guides

3M™ Digital Projector X95 Product Safety Guide © 3M 20076
ENGLISH
• To reduce the risk associated with choking:
- Keep the battery away from children and pets.
• To reduce the risk associated with exposure to hazardous voltage:
- Disconnect power cord when the projector is not in use, during lamp
replacement, and while cleaning.
'RQRWUHPRYHDQ\VFUHZVRWKHUWKDQWKRVHVSHFL¿HGLQWKHODPSUHSODFHPHQW
instructions.
- Do not store or operate this projector in wet environments.
- Do not modify this projector.
- Do not attempt to service the projector - there are no user serviceable parts,
other than the lamp cartridge, inside the projector. Contact a 3M authorized
service provider for service.
- Do not allow water or other liquids to enter the projector.
• To reduce the risk associated with environmental contamination due to
mercury in the projection lamp:
-
Dispose of lamp cartridge in accordance with applicable federal, state and local regulations.
- The lamp in this product contains mercury. Dispose of projection lamp in a manner
that is consistent with your local hazardous waste regulations for mercury.
- For recycling and disposal information, contact your respective governmental
agencies.
In U.S., contact 1-800-328-1371 (3M US) or the Electronic Industries Alliance at
www.lamprecycle.org
In Canada, contact 1-800-364-3577 (3M Canada)
 7RUHGXFHWKHULVNDVVRFLDWHGZLWKH[SRVXUHWRKD]DUGRXVYROWDJHDQGRU¿UH
- Replace power cord if damaged.
- Contact a 3M authorized service provider if the projector becomes damaged.
- Use a grounded extension cord with a rating at least equal to that of the projector.
- Connect this projector to a grounded outlet.
• To reduce the risk associated with hazardous voltage, impact, tripping, and
intense visible light:
- Do not use this projector around unsupervised children.
• To reduce the risk associated with hot surface of lamp cartridge:
- Unplug the projector from the electrical outlet and allow the lamp to cool for 45
minutes before replacing the lamp.
• To reduce the risk associated with a ruptured lamp:
- Always handle the fragile lamp module with care.
- Remove the projector from the ceiling or wall mount before replacing the lamp.
- Use care when replacing the lamp module in the event of a lamp rupture - small
glass particles and small amounts of mercury may be present.
- Ventilate the area where the lamp rupture occurred.
- Wear safety goggles and gloves when cleaning up ruptured lamp debris.
- Carefully collect the ruptured lamp debris in a closed container and dispose of
the container and the expired lamp module in accordance with federal, state,
and local regulations.
- Wash your hands thoroughly after handling ruptured lamp debris.
- Replace the lamp module when the lamp replacement message appears.
- Never replace the lamp module with a previously used lamp module.
WARNING

3M™ Digital Projector X95 Product Safety Guide© 3M 2007
7
ENGLISH
CAUTION
• To reduce the risk associated with environmental contamination:
- Dispose of exhausted batteries in accordance with applicable federal, state, and
local regulations.
• To reduce the risk associated with laser radiation, which if not avoided may
result in minor or moderate injury:
-Never look directly at the laser output of the remote control or point it at other people.
-Never attempt to make any adjustments to the internal controls of the remote
control other than those described in the Operator’s Guide.
• To reduce the risk associated with explosion, and/or chemicals from a leaking
batteries:
- Use only with battery type AA (HITACHI MAXELL Part No.LR6 or R6P), HITACHI
MAXELL Part No.CR2032.
- Orient the battery's plus (+) and minus (-) terminals of the batteries according to
the markings found on the remote control or internal clock battery case.
- Do not leave the battery in the remote for an extended period of time.
  'RQRWKHDWGLVDVVHPEOHVKRUWUHFKDUJHRUH[SRVHWR¿UHRUKLJKWHPSHUDWXUH
- Do not carry batteries loose in your pocket or purse.
- Avoid eye and skin contact in the event that battery would leak.
- Do not mix used and new batteries.
-Obey the local laws on disposing the battery.
• To reduce the risk associated with the impact of a falling projector:
- Use only the 3M™ brand wall/ceiling mounting hardware kit if wall or ceiling
mounting is desired.
,QVWDOODWLRQRIWKH0ZDOOFHLOLQJNLWPXVWRQO\EHSHUIRUPHGE\TXDOL¿HGSHUVRQQHO
- Adhere strictly to the proper installation procedure as outlined in the installation
instructions when installing the 3M™ wall/ceiling kit.
  $OZD\VRSHUDWHWKHXQLWRQDÀDWVWXUG\DQGKRUL]RQWDOVXUIDFH
• To reduce the risk associated with intense visible light:
- Avoid looking directly into the projector lens while the lamp is on.
• To reduce the risk associated with tripping and/or impact:
- Position the power cord and data cable so that they cannot be tripped over.

3M™ Digital Projector X95 Product Safety Guide © 3M 20078
ENGLISH
Important Note
1. Always open the lens shutter or remove lens cap when the projection lamp is on.
2. To avoid premature lamp failure, do not change the mounting position of the
projector (desktop ceiling mount or ceiling desktop mount) and continue to use the
same lamp.
 7RDYRLGUHGXFHGODPSOLIHGRQRWWRXFKSURMHFWLRQODPSZLWKEDUH¿QJHUV
4. To avoid reduced image quality, do not touch projection lens or other internal
optical components.
5. Do not use detergents, chemicals, or any spray liquids for cleaning this unit, other
than those referred to in the “Operator's Guide”.
6. For maximum lamp life, do not strike or drop, improperly handle, or scratch the
lamp glass. Also, do not install an old or used lamp.
 .HHSDLU¿OWHUFOHDQ5HIHUWRWKHFOHDQLQJLQVWUXFWLRQVFRQWDLQHGLQWKH³2SHUDWRU¶V
Guide”.
8. Keep all ventilation openings free of any obstructions.
9. In some countries, the line voltage is NOT stable. This projector is designed to
operate safely within a bandwidth of 100 to 120 volts / 220 to 240 volts (50 to 60
Hz) ±10%, but could fail if power drops or surges of ±10 volts occur. In these high-
risk areas, it is recommended to install a power stabilizer unit.
10. Do not block intake or exhaust air vents. This will cause the projector to over heat
and shut down.
11. Do not place the projector in direct sunlight or near a hot object such as a heater.
12. To prevent damaging the projector, always hold the projector whenever using the
elevator buttons to adjust the elevator feet.
13. Use the accessory cable or a designated-type cable for the connection. Some
cables have to be used with core set. A too long cable may cause certain picture
degradation. Please consult with your dealer for details. For cables that have a
core only at one end, connect the core to the projector.
14. Make sure that you connect devices to the correct port. Incorrect connection may
result in malfunction and/or damage to the device and/or projector.
15. Do not place the projector in the side/front/rear-up position, except care of the air
¿OWHU

3M™ Digital Projector X95 Product Safety Guide© 3M 2007
9
ENGLISH
Product Safety Labels
LASER INDICATOR
LASER button

3M™ Digital Projector X95 Product Safety Guide © 3M 200710
ENGLISH
Lamp
Lamp Operation:
The following symptoms may indicate a lamp in need of replacement:
• LAMP indicator lights up red.
• To reduce the risk associated with environmental contamination due to
mercury in the projection lamp:
-
Dispose of lamp cartridge in accordance with applicable federal, state and local regulations.
- The lamp in this product contains mercury. Dispose of projection lamp in a manner
that is consistent with your local hazardous waste regulations for mercury.
- For recycling and disposal information, contact your respective governmental
agencies.
In U.S., contact 1-800-328-1371 (3M US) or the Electronic Industries Alliance at
www.lamprecycle.org
In Canada, contact 1-800-364-3577 (3M Canada)
WARNING
Display Lamp Operation Hours
To determine the lamp operation hours, follow these steps:
1. While the projector is running, press the MENU button on the remote control.
Choose the “OPTION” using the źbutton, and press the Źbutton or the ENTER button.
Choose the “LAMP TIME” using the źbutton.
2. The operating time of the lamp will be displayed.
The lamp time is the time counted after the last resetting.
¥Note
Please reset the lamp time only when you have replaced the lamp, for a suitable
indication about the lamp.
Reset Lamp Hours
(1) Press the MENU button to display a menu. Only when the EASY MENU has appeared,
please perform the next step (2).
 3RLQWDWWKH³*R7R$GYDQFH0HQX«´LQWKHPHQXXVLQJźŸEXWWRQWKHQSUHVVWKH
ŹEXWWRQ
 3RLQWDWWKH³237,21´LQWKHOHIWFROXPQRIWKHPHQXXVLQJźŸEXWWRQWKHQSUHVV
WKHŹEXWWRQ
 3RLQWDWWKH´/$037,0(´XVLQJźŸEXWWRQWKHQSUHVVWKHŹEXWWRQ$GLDORJZLOO
appear.
 3UHVVWKHŸEXWWRQWRVHOHFW³5(6(7´RQWKHGLDORJ,WSHUIRUPVUHVHWWLQJWKHODPS
time.

3M™ Digital Projector X95 Product Safety Guide© 3M 2007
11
ENGLISH
• To reduce the risk associated with exposure to hazardous voltage:
- Disconnect power cord when the projector is not in use, during lamp replacement,
and while cleaning.
- 'RQRWUHPRYHDQ\VFUHZVRWKHUWKDQWKRVHVSHFL¿HGLQWKHODPSUHSODFHPHQWLQVWUXFWLRQV
- Do not attempt to service the projector - there are no user serviceable parts, other
than the lamp cartridge, inside the projector. Contact a 3M authorized service
provider for service.
• To reduce the risk associated with hot surface of lamp cartridge:
- Unplug the projector from the electrical outlet and allow the lamp to cool for 45
minutes before replacing the lamp.
• To reduce the risk associated with a ruptured lamp:
- Always handle the fragile lamp module with care.
- Remove the projector from the ceiling or wall mount before replacing the lamp. In
the case of a lamp rupture, small glass particles could fall out when the lamp door
is opened or the projector is tilted.
- Use care when replacing the lamp module in the event of a lamp rupture - small
glass particles and small amounts of mercury may be present.
- Ventilate the area where the lamp rupture occurred.
- Wear safety goggles and gloves when cleaning up ruptured lamp debris.
- Carefully collect the ruptured lamp debris in a closed container and dispose of
the container and the expired lamp module in accordance with federal, state, and
local regulations.
- Wash your hands thoroughly after handling ruptured lamp debris.
- Replace the lamp module when the lamp replacement message appears.
- Never replace the lamp module with a previously used lamp module.
• To reduce the risk associated with environmental contamination due to
mercury in the projection lamp:
-
Dispose of lamp cartridge in accordance with applicable federal, state and local regulations.
- The lamp in this product contains mercury. Dispose of projection lamp in a manner
that is consistent with your local hazardous waste regulations for mercury.
- For recycling and disposal information, contact your respective governmental
agencies.
In U.S., contact 1-800-328-1371 (3M US) or the Electronic Industries Alliance at
www.lamprecycle.org
In Canada, contact 1-800-364-3577 (3M Canada)
WARNING
The glass lamp used in this projector contains small amounts of mercury and operates at
high pressure and at high temperature and may unexpectedly shatter. Each lamp has a
different lifetime and can fail in different ways, including a rupture with a loud bang or
simply burn out. In the event of a lamp rupture, be sure to follow the instructions.
Replacing Lamp
Important Note:
,IWKHODPSEUHDNVVRRQDIWHUWKH¿UVWWLPHLWLVXVHGLWLVSRVVLEOHWKDWWKHUHDUHHOHFWULFDOSUREOHPV
elsewhere besides the lamp. If this happens, contact your local dealer or a service representative.

3M™ Digital Projector X95 Product Safety Guide © 3M 200712
ENGLISH
¥Note
Reset the lamp operation hours. See “Reset Lamp Hours” for details.
3. Remove lamp module: Slowly pick up the lamp module by the handles. (4)
4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated.
Tighten the lamp module retaining screws (3) to secure the lamp module in place.
Optional Lamp: 78-6969-9930-5 (Contact 3M Customer Service.)
6OLGHWKHODPSGRRUEDFNLQSODFHDQG¿UPO\IDVWHQWKHODPSGRRUDVFUHZ
¥Note
For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.
Also, do not install an old or previously used lamp.
1. Remove lamp access door: Loosen the lamp door screw (marked by arrow) (1) and then slide
the lamp door to the side to remove it. (2)
2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws (marked by
arrow). (3)
¥Note
All lamp module screws must be loosened. These screws are self-containing screws that
cannot be removed from the lamp module or access door.
(2) Lamp access door
(1) Screw
(4) Handle
(3) Screws

3M™ Digital Projector X95 Product Safety Guide© 3M 2007
13
ENGLISH
Putting batteries
Please load the batteries before using the remote control. If the remote control starts to malfunction, replace
the batteries. If you will not use the remote control for an extended period, remove the batteries from the
remote control and store them in a safe place.
1. Slide back and remove the battery cover in the
direction of the arrow.
2. Align and insert the two AA batteries
(HITACHI
MAXELL Part No.LR6 or R6P)
according to
their plus and minus terminals as indicated in the
remote control.
3. Replace the battery cover in the direction of the
arrow and snap it back into place.
Remote control
WARNING
• Always handle the batteries with care and use them only as directed. Improper use
PD\UHVXOWLQEDWWHU\H[SORVLRQFUDFNLQJRUOHDNDJHZKLFKFRXOGUHVXOWLQ¿UHLQMXU\
and/or pollution of the surrounding environment.:
-%HVXUHWRXVHRQO\WKHEDWWHULHVVSHFL¿HG'RQRWXVHEDWWHULHVRIGLIIHUHQWW\SHV
at the same time. Do not mix a new battery with used one.
-
Make sure the plus and minus terminals are correctly aligned when loading a battery.
- Keep a battery away from children and pets.
-Do not recharge, short circuit, solder or disassemble a battery.
-
'RQRWDOORZDEDWWHU\LQD¿UHRUZDWHU.HHSEDWWHULHVLQDGDUNFRRODQGGU\SODFH
- If you observe battery leakage, wipe out the battery residue and replace the battery.
If the residue adheres to your body or clothes, rinse well with water immediately.
- Obey the local laws on disposing the battery.

3M™ Digital Projector X95 Product Safety Guide © 3M 200714
ENGLISH
Consumption of the battery makes the clock not to work correctly. When the clock is wrong or it
has stopped, please replace the battery according to the following procedures.
1. Turn the projector off, and unplug the power cord. Allow the projector
WRFRROVXI¿FLHQWO\
2. After making sure that the projector has cooled adequately, slowly
turn over the projector, so that the bottom is facing.
3. Remove the battery cover.
Turn the battery cover in the direction indicated “OPEN” using such
as coins. Then the battery cover will come up. While removing the
battery cover, pick its knob.
4. Take the old battery out.
Press the metal claw of the battery holder. Then the battery will come
up. Remove the battery.
5. Put a new battery in.
Replace battery with HITACHI MAXELL, Part No.CR2032 only.
8VHRIDQRWKHUEDWWHU\PD\SUHVHQWDULVNRI¿UHRUH[SORVLRQ
Insert a new battery in the battery holder according to its minus
terminal – as indicated in the battery holder, so that the side marked
E\LVIDFLQJ$QGSXVKWKHEDWWHU\LQWRWKHEDWWHU\KROGHUIXOO\WR¿[
6. Close the battery cover.
Replace the battery cover in place, then turn it in the direction
LQGLFDWHG³&/26(´XVLQJVXFKDVFRLQVWR¿[
Replacing the internal clock battery
WARNING
• Always handle the batteries with care and use them only as directed. Battery may
H[SORGHLIPLVWUHDWHG'RQRWUHFKDUJHGLVDVVHPEOHRUGLVSRVHRILQ¿UH$QGDOVR
LPSURSHUXVHPD\UHVXOWLQFUDFNLQJRUOHDNDJHZKLFKFRXOGUHVXOWLQ¿UHLQMXU\DQG
or pollution of the surrounding environment.:
-%HVXUHWRXVHRQO\WKHEDWWHULHVVSHFL¿HG
-
Make sure the plus and minus terminals are correctly aligned when loading a battery.
If the battery is placed in the battery holder upside-down, it may be hard to remove.
- Keep a battery away from children and pets. If swallowed consult a physician
immediately for emergency treatment.
-Do not short circuit or solder a battery.
-
'RQRWDOORZDEDWWHU\LQD¿UHRUZDWHU.HHSEDWWHULHVLQDGDUNFRRODQGGU\SODFH
- If you observe battery leakage, wipe out the leakage and then replace a battery. If the
leakage adheres to your body or clothes, rinse well with water immediately.
- Obey the local laws on disposing the battery.
¥Note
If the battery is placed in the battery holder upside-down, follow the procedure below to
remove and reload it properly.
1. Remove the battery cover as described in steps 1 through 3 above.
2. Turn the projector over again, so that the top of the projector is facing up.
3. While lifting the side of the projector closest to the lens, press the metal claw of the battery holder.
The battery will fall out of the holder, so be careful not to lose it.
4. Turn the projector over once more, so that the bottom faces up, and reload the battery correctly.
7KHLQWHUQDOFORFN¶VWLPHZLOOEHUHVHWZKHQWKHEDWWHU\LVUHPRYHG3OHDVHUHFRQ¿JXUHWKH
time via the menu or a web browser after replacing the battery.
(Date/Time Settings in the Network Guide)
%.15'
12'0
Knob
Metal claw
“+” marking
Battery Cover

3M™ Digital Projector X95 Product Safety Guide© 3M 2007
15
ENGLISH
Using a USB storage
In order to view images stored in a USB storage, such as a USB memory,
LQVHUWWKHGHYLFHLQWRWKH$8;,2SRUW%HIRUHUHPRYLQJWKH86%VWRUDJH
be sure to perform the REMOVE MEDIA procedure using the PC-LESS
PRESENTATION menu under the MIU menu.
Using an SD card
In order to view images stored in an SD storage, such as an SD memory card, insert the device into the SD
card slot. Or, in order to use the wireless network function, load the internal clock battery and insert the
designated wireless network card that is sold as an option into the slot.
Inserting the SD card
1. Make sure that the power code is not plugged into the projector for the wireless
network card only.
2. Remove the SD card slot cover. After slowly insert the SD card completely into
the SD card slot, replace the SD card slot cover.
Using the slot cover lock for security
Using the enclosed slot cover lock can prevent the SD card slot cover from being
opened.
1. Open the two plates of the slot cover lock to put the tips of two plates together,
and then insert the tips to the lock hole of the SD card slot cover.
2. Put the body of the two plates together. Then, hook a padlock or combination
lock to the hole of the slot cover lock.
Removing the SD card
1. Perform the REMOVE MEDIA procedure using the PC-LESS PRESENTATION menu under
the MIU menu for SD storage card only.
2. Turn the projector off and unplug the power code from the projector for the wireless network
card only.
3. Remove the SD card slot cover. After taking the SD card away, replace the SD card slot cover.
Inserting an SD Card and USB Memory
CAUTION
• Do not touch the SD card while being accessed.
• To use the wireless network function, the designated wireless network card that is
sold as an option is required.
-The wireless network card is not permitted to be sold or used in some countries
and regions. Use the card only in the country or region where you buy it. For
more information, ask your local dealer.
-
When using the wireless network card, to comply with FCC RF exposure compliance
requirements, the antenna used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.
- Before using the projector with a wired LAN, remove the wireless network card.
SD card slot cover
(SD card slot inside) AUX I/O port
SD CARD
SD CARD
SDCARD
A
ngled corner

3M™ Digital Projector X95 Product Safety Guide © 3M 200716
ENGLISH
3M™ Digital Projector Limited Warranty
Warranty; Limited Remedy; Limited Liability
This product will be free from defects in material and manufacture for a period of three years from the date of purchase or for
KRXUVRIXVHZKLFKHYHURFFXUV¿UVW00$.(61227+(5:$55$17,(6RU&21',7,216,1&/8',1*%87
NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at
3M’s option, to replace or repair the 3M product or to refund the purchase price of the 3M product. All replaced parts or products
become property of 3M. If the product is repaired, 3M will repair the defective part(s) with a new or used part(s). If the product is
replaced, 3M will replace the product with the same or equivalent model and with a new or refurbished product. The replacement
product carries the original equipment warranty.
Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising
from this 3M product, regardless of the legal theory asserted. Please see the following warranty limitations and exclusions.
:DUUDQW\/LPLWDWLRQVDQG([FOXVLRQV
The following limitations and exclusions apply to the above mentioned limited warranty:
(a) The above warranty is limited to the 3M Digital Projector and excludes the lamp and accessories.
(b) The original lamp has the following limited warranty: 90 days from the date of purchase or 180 hours of
ODPSXVHZKLFKHYHURFFXUV¿UVW
(c) 3M Digital Projectors are designed to operate in the typical indoor environment. The product Limited
Warranty is void if used outside of the following circumstances:
99$&+]
• 16° to 29° C (60° to 85° F)
• 10-80% RH (without condensation)
• 0-1828m (0-6000 feet) above sea level
(d) The Air Intake and Exhaust Vent must be clear of obstructions, including any potential blockage or
obstructions caused from a ceiling or other mount. Inadequate air ventilation will cause the projector to
malfunction or will cause damage to the projector which will void the warranty.
(e) The Warranty will be void if someone other than 3M (or a 3M Authorized Service Provider) repairs or
PRGL¿HVWKH0SURGXFW
(f) The Warranty does not cover damage due to misuse, neglect, mishandling, abuse, or normal wear and tear.
(g) The Warranty does not cover any additional costs including, but not limited to, those associated with
removal, cleaning or installation of the product, adjustments, (mechanical or electronic), made to the product
RUUHSODFLQJFXVWRPHUUHSODFHDEOHSDUWVOLNHODPSVDQGDLU¿OWHUV
(h) The Warranty does not cover shipping charges incurred when returning the product to 3M for repair.
)RUZDUUDQW\VXSSRUWSOHDVHFDOORUZULWH\RXUORFDO0RI¿FHRUD0$XWKRUL]HG6HUYLFH3URYLGHUWRREWDLQDQ50$5HWXUQ
Material Authorization Number) before returning the product. If you are inside the Continental United States of America,
please contact 3M Customer Service at 800-328-1371 or email [email protected].
To ensure you do not void your warranty, please review the Intended Use for Digital Projectors.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to
the product which are not contained in 3M’s current publication, or any contrary statements contained on your purchase order
VKDOOKDYHQRIRUFHRUHIIHFWXQOHVVH[SUHVVO\DJUHHGXSRQLQZULWLQJE\DQDXWKRUL]HGRI¿FHURI0

3M™ Digital Projector X95 Product Safety Guide© 3M 2007
17
ENGLISH
FCC STATEMENT - CLASS B: This equipment generates, uses and can radiate radio frequency energy, and if not installed and
used in accordance with the instruction manual may cause interference to radio communications. It has been tested and found to
comply with the limits for a Class “B” computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed
to provide reasonable protection against such interference when operated in a residential installation.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
&RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79WHFKQLFLDQIRUKHOS
WARNING: In the US This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
INSTRUCTIONS TO USERS: This equipment complies with the requirements of FCC equipment provided that the following
conditions are met. The cables may have to be used with the core set to the projector side. Use the cables which are included with
WKHSURMHFWRURUVSHFL¿HG
Note:&KDQJHVRUPRGL¿FDWLRQVQRWH[SUHVVO\DSSURYHGE\WKHSDUW\UHVSRQVLEOHIRUFRPSOLDQFHFRXOGYRLGWKHXVHU¶VDXWKRULW\WR
operate the equipment.
EEC STATEMENT: 7KLVPDFKLQHZDVWHVWHGDJDLQVWWKH((&(XURSHDQ(FRQRPLF&RPPXQLW\IRU(0&(OHFWUR
0DJQHWLF&RPSDWLELOLW\DQGIXO¿OOVWKHVHUHTXLUHPHQWV
•
7KLVPDFKLQHZDVWHVWHGDJDLQVWWKH((&(XURSHDQ(FRQRPLF&RPPXQLW\IRU/9'/RZ9ROWDJH'LUHFWLYHDQGIXO¿OOVWKHVHUHTXLUHPHQWV
• 7KLVSURGXFWLVFRPSOLDQWZLWK(8'LUHFWLYH(&5HVWULFWLRQRI+D]DUGRXV6XEVWDQFHVLQ(OHFWULFDODQG(OHFWURQLF
(TXLSPHQWDVDPHQGHGE\&RPPLVVLRQ'HFLVLRQ(&RQPD[LPXPFRQFHQWUDWLRQYDOXHV
• 7KLVSURGXFWLVFRPSOLDQWZLWK(8'LUHFWLYH(&RQ:DVWH(OHFWULFDODQG(OHFWURQLF(TXLSPHQW:(((
Video Signal Cables: Double shielded coaxial cables (FCC shield cable) must be used and the outer shield must be connected
to the ground. If normal coaxial cables are used, the cable must be enclosed in metal pipes or in a similar way to reduce the
interference noise radiation.
Video Inputs: The input signal amplitude must not exceed thHVSHFL¿HGOHYHO
PATENTS, TRADEMARKS & COPY RIGHTS
IBM is a registered trademark of International Business Machines Corporation. Apple Macintosh and Apple Powerbook
are registered trademarks of Apple Computer, Inc. Microsoft and Windows 95 &Windows 98 are registered trademarks, and
Windows and Windows for Workgroups are trademarks of the Microsoft Corporation. Toshiba is a registered trademark of
Toshiba Corporation. Kensington is a trademark of Kensington Corporation. All other products are trademarks or registered
trademarks of their respective companies.

3M Austin Center
Building A145-5N-01
6801 River Place Blvd.
Austin, TX 78726-9000
3M Canada
P.O. Box 5757
London, Ontario
N6A 4T1
00H[LFR6$GH&9
Apartado Postal 14-139
Mexico, D.F. 07000
Mexico
3M Europe
Boulevard de l’Oise
95006 Cerge Pontoise Cedex
France Litho in Japan
© 3M 2007
78-6971-1377-3 Rev. A
QR74231
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be eliable, but the
accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended
application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s
current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in
ZULWLQJE\DQDXWKRUL]HGRI¿FHURI0
Let us help you make the most of your next presentation. We offer everything from presentation supplies to tips for better meetings. And we’re
the only transparency manufacturer that offers a recycling program for your used transparencies. For late-breaking news, handy reference and free
product samples, call us toll-free in the continental United States and Canada, 24 hours a day, or visit our Internet Website.