3One data IES605-2D series User manual

IES605-2D series
Industrial Ethernet switch
User manual
Shenzhen 3onedata Technology Co.,Ltd
Tel: [phone] Fax: [phone]
www.3onedata.com

【Summarize】
IIES605-2D series is an industrial, management, redundant
industrial Ethernet switch and integrate 2 port serial device servers.
It included
1. IES605-2D (RS-232)-P (12/48VDC),
Support 5 port 10/100Base T(X) and 2 port RS-232,
2. IES605-2DI (RS-485)-P (12/48VDC),
Support 5 port 10/100BaseT(X) and 2 port RS-485/422,
3. IES605-1F-2D (RS-232)-P (12/48VDC),
Support 4 port is 10/100BaseT(X) Ethernet, 1 port is 100BaseFX
fiber port and 2 port RS-232,
4. IES605-1F-2DI (RS-485)-P(12/48VDC),
Support 4 port is 10/100BaseT(X) Ethernet, 1 port is 100BaseFX
fiber port and 2 port RS-485/422,
5. IES605-2F-2D (RS-232)-P (12/48VDC),
Support 3 port is 10/100BaseT(X) Ethernet, 2 port is 100BaseFX
fiber port and 2 port RS-232,
6. IES605-2F-2DI (RS-485)-P (12/48VDC).
Support 3 port is 10/100BaseT(X) Ethernet, 2 port is 100BaseFX
fiber port and 2 port RS-485/422,
it adopted SW-Ring redundant technology (Recovery time<20ms),
users can set the redundant easily to increase network reliability,
furthermore. It adopted no fan, low power consumption design,
IP30, corrugate high strength iron shell, the performance is more
steadily. It accorded with CE, FCC standard and Industrial 4 class,
DIN rail installation and wide operating temperature (-40~75C), it
can satisfied some kinds of industrial environment, it can provide
reliable and quickly solution for your Ethernet device
【Packing list】
Please check the packaging and accessories by your first
using.

Industrial Ethernet switch(IES605-2D series)ⅹ 1
User manual ⅹ 1
CD ⅹ 1
Certificate of quality ⅹ 1
Warranty card ⅹ 1
Please inform us or our distributor if your equipments have
been damaged or lost any accessories, we will try our best to
satisfy you.
【Features】
IEEE802.3, IEEE802.3u, IEEE 802.3x
Support SW-RingTM redundant network patent technology
(Faulty recovery time<20ms)
Support 2 port RS-232/ RS-485/ RS-422 serial device server
Support based on socket application access
Support Sever, Client, UDP based mode and Sever, UDP
advanced mode
Support TCP, UDP, ARP, and DHCP protocol
Support Web management
Support 2K MAC address table
Support 2 power supply input and 1 relay alarm output
Support port line and redundant network faulty/unusual,
local and remote alarm
High strength iron shell, IP30 protection
Industrial 4 class design
Redundant 24VDC power supply input(12~48VDC)
-40~75℃working temperature
DIN-rail, wall mounting installation
【Panel Layout】
IES605-2D series

Back view Top and below view
IES605-2D（RS-232）-P(12/48VDC)
1. PWR1/PWR2 power supply
2. Ground screw
3. Relay output terminal block
4. DIP switch (4 bits)
5. DIN-Rail
6. LED indicator
7. 10/100Base-TX RJ45 port
8. RS-232 port
IES605-2DI（RS-485）-P(12/48VDC)
1. PWR1/PWR2 power supply
2. Ground screw
3. Relay output terminal block
4. DIP switch (4 bits)
5. DIN-Rail
6. LED indicator
7. 10/100Base-TX RJ45 port
8. RS-485/422 port

IES605-1F-2D（RS-232）-P(12/48VDC)
1. PWR1/PWR2 power supply
2. Ground screw
3. Relay output terminal block
4. DIP switch (4 bits)
5. DIN-Rail
6. LED indicator
7. 100Base-FX fiber port
8. RS-232 port
9. 10/100Base-TX RJ45 port
IES605-1F-2DI（RS-485）-P(12/48VDC)
1. PWR1/PWR2 power supply
2. Ground screw
3. Relay output terminal block
4. DIP switch (4 bits)
5. DIN-Rail
6. LED indicator
7. 100Base-FX fiber port
8. RS-485/422 port
9. 10/100Base-TX RJ45 port
IES605-2F-2D（RS-232）-P(12/48VDC)
1. PWR1/PWR2 power supply
2. Ground screw
3. Relay output terminal block
4. DIP switch (4 bits)
5. DIN-Rail
6. LED indicator

7. 100Base-FX fiber port
8. RS-232 port
9. 10/100Base-TX RJ45 port
IES605-2F-2DI（RS-485）-P(12/48VDC)
1. PWR1/PWR2 power supply
2. Ground screw
3. Relay output terminal block
4. DIP switch (4 bits)
5. DIN-Rail
6. LED indicator
7. 100Base-FX fiber port
8. RS-485/422 port
9. 10/100Base-TX RJ45 port
【Appearance and dimension】
Unit (mm)
Front view Back view

【Power supply input】
Vertical view Top view
IES605-2D series provide 4 bits industry terminal block (V1-,
V1+, V2-, V2+）), V-, V+ is 12～48VDC power supply input.
IES605-2D series DC power supply input supported
redundancy function, provided PWR1 and PWR2 power input,
can use for single, and can connect 2 separately power supply
system, use 1 pair terminal block connect the device at the same
time. If one of the power system broke, the device can work
un-interruptible. built-in over current protection, Reverse
connection protection
【Relay connection】
Vertical view Top view
The relay owns two contacts of the terminal block on the top
panel of IES605-2D series. It is used to detect both power failure
and port failure. The two wires attached to contacts form an open
circuit when:
(1) IES605-2D series has lost power supply from one of the
DC power inputs.
(2) One of the ports is failure.
【DIP switch】
Top panel provided 4 bits DIP switch to do function

configure（OFF is default factory）,1 and 2 keep for future function.
3 is for upgrade. 4 is recovery default factory. Please power off
and power on when you change the status of DIP switch.
【Communication connector】
10/100BaseT(X) Ethernet port
The pinout of RJ45 port display as below, connect by UTP or
STP. The connect distance is no more than 100m. 100Mbps is
used 120Ωof UTP 5 , 10Mbps is used 120Ωof UTP 3,4,5.
RJ 45 port support automatic MDI/MDI-X operation. can
connect the PC, Server, Converter and HUB .Pin 1,2,3,6
Corresponding connection in MDI. 1→3, 2→6, 3→1, 6→2 are
used as cross wiring in the MDI-X port of Converter and HUB.
10Base-T/100Base-TX are used in MDI/MDI-X, the define of Pin
in the table as below.
NO.
MDI signal
MDI-X signal
1
TX+
RX+
2
TX-
RX-
3
RX+
TX+
6
RX-
TX-
4, 5, 7, 8
—
—
Note：“TX±”Transmit Data±，“RX±”Receive Data±，“—”Not Use。
MDI (straight-through cable)
1 8

MDI-X (Cross over cable)
MDI/MDI-X auto connection makes IES605-2D easy to use
for customers without considering the type of network cable.
100Base-FX Fiber port
100Base-FX full-duplex SM or MM port, SC/ST/FC type .The
fiber port must be used in pair, TX (transmit) port connect remote
switch’s RX (receive) port; RX (receive) port connect remote
switch’s TX (transmit) port.
The optical fiber connection supports the line to instruct
enhance the reliability of network effectively.
Suppose: If you make your own cable, we suggest labeling the
two sides of the same line with the same letter (A-to-A and B-to-B,
shown as below, or A1-to-A2 and B1-to-B2).
RS-232 port：

PIN
RS-232
1
DCD
2
RxD
3
TxD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
—
DB9 male (RS-232)
RS-485/422 port:
PIN
RS-422
RS-485
1
T+
D+
2
T-
D-
3
GND
/
4
R+
/
5
R-
/
RS-485/422
【LED indicator】
IES605-2D series LED indicator light on the front panel .the
function of each LED is described in the table as below:

System status LED
LED
Indicator
Description
PWR1
ON
P1 connection regularly
OFF
P1 Power supply have no connection or
unwonted
PWR2
ON
P2 connection regularly
OFF
P2 Power supply have no connection or
unwonted
Alarm
ON
Power, port have alarm
OFF
Power, port have no alarm
Run
ON
Device unwonted
Blinking
Device working steadily, Blinking per
second
Link/Act
ON
Established effective
network connection
Blinking
Network in activity status
OFF
Did not establish effective
network connection
TX
Blinking
Transmit data unwonted
OFF
Transmit data wonted
RX
Blinking
Receive data unwonted
OFF
Receive data wonted
【Installation】
Before installation, confirm that the work environment meet the
installation require, including the power needs and abundant space.
Whether it is close to the connection equipment and other
equipments are prepared or not.
1. Avoid in the sunshine, keep away from the heat fountainhead or
the area where in intense EMI.
2. Examine the cables and plugs that installation requirements.

3. Examine whether the cables be seemly or not (less than 100m)
according to reasonable scheme.
4. Screw, nut, tool provide by yourself.
5. Power: redundant 12-48VDC o power input
6. Environment: working temperature -40～75℃
Relative humidity 5%～95%
DIN rail installation
In order to use in industrial environments expediently, IES605-2D
series adopt 35mm DIN-Rail installation, the installation steps as
fellows:
1. Examine the DIN-Rail attachment
2. Examine DIN Rail whether be firm and the position be
suitability or not.
3. Insert the top of the DIN-Rail into the slot just below the stiff
metal spring.
4. The DIN-Rail attachment unit will snap into place as shown
below.
Wiring Requirements
Cable laying need to meet the following requirements,
1. It is needed to check whether the type, quantity and
specification of cable match the requirement before cable
laying;
2. It is needed to check the cable is damaged or not, factory
records and quality assurance booklet before cable laying;
3. The required cable specification, quantity, direction and

laying position need to match construction requirements,
and cable length depends on actual position;
4. All the cable cannot have break-down and terminal in the
middle;
5. Cables should be straight in the hallways and turning;
6. Cable should be straight in the groove, and cannot beyond
the groove in case of holding back the inlet and outlet holes.
Cables should be banded and fixed when they are out of the
groove;
7. User cable should be separated from the power lines.
Cables, power lines and grounding lines cannot be
overlapped and mixed when they are in the same groove
road. When cable is too long, it cannot hold down other
cable, but structure in the middle of alignment rack;
8. Pigtail cannot be tied and swerved as less as possible.
Swerving radius cannot be too small (small swerving causes
terrible loss of link). Its banding should be moderate, not too
tight, and should be separated from other cables;
9. It should have corresponding simple signal at both sides
of the cable for maintaining.
【Specification】
Technology
Standard: IEEE802.3, IEEE802.3u, IEEE 802.3x,
Protocol: ARP, ICMP, TCP, UDP, DHCP, DNS, HTTP,
SW-RingTM
Flow control: IEEE802.3x, back pressure control
Function
Function: SW-RingTM, Broadcast storm control, flow statistics,
upgrade online, up and download configuration file, user name
access system.
SW-RingTM: Single, Couple, Chain, Dual homing ring.
Serial device server: 4 port serial device sever, each port
Support 4pcs TCP or UDP session connection

Interface
100M Ethernet: 10/100Base-TX self-adapt RJ45 port.
100M fiber port: 100Base-FX (SC/ST/FC)
Alarm port: 2 bit 7.62mm terminal block,
1 channel relay alarm output
Serial
RS-232 signal: TXD, RXD, RTS, CTS, DTR, DSR, GND
RS-422 signal: T+, T-, R+, R-, GND
RS-485 signal: D+, D-, GND
Parity: None, Even, Odd, Space, Mark
Data bit: 5bit, 6bit, 7bit, 8bit
Band rate; 300～115200bps
Direction control: RS485 side adopt ADDC technology, auto
detect and control data transfer direction
Loading: RS-485/422 side support 32 nodes loop back
Protection: 2KV isolation, 15KV static protection.
Connector: RS232: DB9 male, RS485/4225 bit terminal block
Transfer distance
Twisted cable: 100m (CAT5/CAT5e)
Multi mode fiber: 1310nm,2/5Km
Single mode fiber: 1310nm, 20/40/60Km
1550nm, 80/100/120Km
RS-485/422: 1200m
RS-232: 15m
Exchange attribute:
100M transmit speed: 148810pps
Transfer: Store and forward
System exchange bandwidth: 1.2G
Buffer memory: 1MKbits
Support 2K MAC address table
LED indicator
Power supply indicator: PWR1, PWR2
Alarm indicator: Alarm

System indicator: Run
Ethernet port indicator: Link/Act（1-5）
Serial port indicator: TX (1-2), RX (1-2)
Power supply
Input voltage: 24VDC (12~48VDC)
Terminal block: 4 bits 7.62mm terminal block
IES605-2D（RS-232）-P(12/48VDC)
None load consumption: 0.9W@24VDC
Full load consumption: 1.6 W@24VDC
IES605-2DI（RS-485）-P(12/48VDC)
None load consumption: 1.3W@24VDC
Full load consumption: 1.9 W@24VDC
IES605-1F-2D（RS-232）-P(12/48VDC)
None load consumption: 1.5W@24VDC
Full load consumption: 2W@24VDC
IES605-1F-2DI（RS-485）-P(12/48VDC)
None load consumption: 1.7W@24VDC
Full load consumption: 2.4W@24VDC
IES605-2F-2D（RS-232）-P(12/48VDC)
None load consumption: 2.2W@24VDC
Full load consumption: 2.3W@24VDC
IES605-2F-2DI（RS-485）-P(12/48VDC)
None load consumption: 2.4W@24VDC
Full load consumption: 2.7W@24VDC
Support dual redundant power supply
Support inside over-current 4.0A protection
Mechanical
Shell: IP30, high strength iron shell.
Installation: DIN Rail

Dimension（W×H×D）: 136mm×52mm×105mm
Weight: 900g
Environmental
Operating Temperature: -45°C to 75°C
Storage Temperature: -45°C to 85°C
Relative Humidity: 10 to 95% (non-condensing)
Standard
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), Level 4
EN61000-4-3(RS), Level 3
EN61000-4-4 (EFT), Level 4
EN61000-4-5 (Surge), Level 4
EN61000-4-6(CS), Level 3
EN61000-4-8(PFM), Level 5
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Certification
CE, FCC, RoHS, UL508 (Pending)
Warranty
Warranty time: 5 years