3One data IES6116 Series User manual

IES6116 series
Managed Industrial Ethernet Switch
User manual
Version 1.0.0, Mar. 2015
www.3onedata.com

User manual
1www.3onedata.com
IES6116 series user manual
Statement
Copyright Notice
Information in this document is reserved by 3onedata Co., Ltd. Reproduction
and extract without permission is prohibited.
Trademarks Notice
and is registered trademarks of 3onedata Co.,Ltd.
All other trademarks or registered marks in this manual belong to their respective
manufacturers.
Agreement
As the product version upgrades or other reasons, this document is subject to
change without notice. Unless other agreement, this document only as a
guide to use. All statement, information and suggestion in this document,
without warranty of any kind, either expressed or implied.
Revision History
Version No.
Date
Reason
V1.0.0
2015-03-27
Creating Documents
Notes
In reading this manual, please pay attention to the following symbols,
Information necessary to explain
Special attention

User manual
2www.3onedata.com
Content
Chapter 1 Summarize ..................................................................................................................................1
1.1 Introduction......................................................................................................................................... 1
1.2 Features.............................................................................................................................................. 1
Chapter 2 Hardware Description..................................................................................................................3
2.1 Panel Design...................................................................................................................................... 3
2.2 Power Input.........................................................................................................................................6
2.3 Relay connection................................................................................................................................ 6
2.4 Console port....................................................................................................................................... 7
2.5 Communication port ...........................................................................................................................7
2.6 LED Indicator...................................................................................................................................... 9
2.7 Installation...........................................................................................................................................9
Chapter 3 Appearance and Dimension......................................................................................................11
3.1 Appearance ...................................................................................................................................... 11
3.2 Dimension......................................................................................................................................... 12
Chapter 4 Packing List............................................................................................................................... 13
Chapter 5 Network Configuration...............................................................................................................14
5.1 Configure PC‟s IP Address...............................................................................................................14
Chapter 6 WEB Management....................................................................................................................15
6.1 Configurate preparing....................................................................................................................... 15
6.2 System status................................................................................................................................... 17
6.3 Port Configuration............................................................................................................................. 19
6.3.1 Port Settings ..............................................................................................................................19
6.3.2 Bandwidth Management............................................................................................................21
6.3.3 Storm Suppression ....................................................................................................................22
6.4 L2 Feature........................................................................................................................................ 24
6.4.1 Port-based VLAN.......................................................................................................................24
6.4.2 IEEE 802.1Q VLAN.................................................................................................................... 25
6.4.3 IGMP Snooping..........................................................................................................................26
6.4.4 GMRP ........................................................................................................................................ 27
6.4.5 Static Multicast FWD..................................................................................................................28
6.5 QOS.................................................................................................................................................. 29
6.5.1 QOS Classification..................................................................................................................... 29
6.5.1.1 Weighted Fair priority..........................................................................................................29
6.5.1.2 Strict priority ........................................................................................................................ 29
6.5.2 Port Priority................................................................................................................................ 30

User manual
3www.3onedata.com
6.5.3 COS ...........................................................................................................................................30
6.5.4 ToS/DSCP.................................................................................................................................. 31
6.6 Redundancy...................................................................................................................................... 33
6.6.1 Port Trunking .............................................................................................................................33
6.6.2 Rapid Ring.................................................................................................................................34
6.6.2.1 Ring V3 single ring configuration........................................................................................ 35
6.6.2.2 Ring V3 dual ring configuration...........................................................................................36
6.6.2.3 Ring V3 Coupling Configuration.......................................................................................... 37
6.6.2.4 Ring V3 Chain Configuration ..............................................................................................38
6.6.3 Rapid Spanning Tree Protocol (RSTP)..................................................................................... 39
6.7 Access control ..................................................................................................................................41
6.7.1 Login settings............................................................................................................................. 41
6.7.2 Access Profile............................................................................................................................ 42
6.7.3 IEEE 802.1X .............................................................................................................................. 44
6.7.4 Database certification................................................................................................................47
6.7.5 MAC port lock ............................................................................................................................47
6.8 Remote monitoring...........................................................................................................................49
6.8.1 SNMP management................................................................................................................... 49
6.8.2 RMON........................................................................................................................................ 51
6.8.2.1 Rmon statistics....................................................................................................................51
6.8.2.2 Rmon History....................................................................................................................... 51
6.8.2.3 Rmon alarm.........................................................................................................................52
6.8.2.4 Rmon Event......................................................................................................................... 52
6.8.3 Email Warning............................................................................................................................53
6.8.4 Relay Warning ........................................................................................................................... 54
6.9 Port Statistics.................................................................................................................................... 56
6.9.1 Rx Frame Statistics.................................................................................................................... 56
6.9.2 Tx Frame Statistics.................................................................................................................... 57
6.9.3 Traffic Statistics..........................................................................................................................58
6.9.4 MAC address table ....................................................................................................................59
6.10 Diagnosis........................................................................................................................................ 61
6.10.1 Mirror........................................................................................................................................ 61
6.10.2 PING Test................................................................................................................................62
6.11Basic settings................................................................................................................................... 64
6.11.1 SNTP........................................................................................................................................64
6.11.2 Network & Reboot....................................................................................................................65
6.11.3 System Identification................................................................................................................67
6.11.4 System Log.............................................................................................................................. 68
6.11.5 System File Upgrade ............................................................................................................... 69
6.11.6 Logout...................................................................................................................................... 71
Chapter 7 Repair and Service....................................................................................................................72

User manual
4www.3onedata.com
7.1 Internet Service ................................................................................................................................72
7.2 Make a call to our technical office.................................................................................................... 72
7.3 Repair or Replace.............................................................................................................................72
Appendix 1 Glossary table.........................................................................................................................73
Appendix 2 Treatment of common problem...............................................................................................75

User manual
1www.3onedata.com
Chapter 1 Summarize
1.1 Introduction
IES6116 series is an industrial grade, managed and redundancy Ethernet switch. The IES6116 industrial
Ethernet switches consists of 16 Ethernet ports. The IES6116-2F consists of 14 Ethernet ports and 2
Fiber ports. The IES6116-4F consists of 12 Ethernet ports and 4 Fiber ports. The IES6116-6F consists of
10 Ethernet ports and 6 Fiber ports. The IES6116-8F consists of 8 Ethernet ports and 8 Fiber ports that
provide an economical solution for your industrial Ethernet connection. The switch support AC power
input series and DC power input series optional. SW-RingTM is designed as rapid redundancy network
arithmetic. It provided recover technology for fault of rapid redundant network, the recovery time<20ms.
The switch accorded to CE, FCC standard and Industry grade 4 design requirement, support redundancy
power input and 1 channel relay alarm output, and -40～75℃working temperature, can meet all kinds of
Industrial environment requirement. It can use in power, water conservancy, transportation area etc.
1.2 Features
Support 16 Fast Ethernet port
8K MAC address table
Back panel bandwidth: 12.8Gbps
Back pressure and flow control
Support Error source address filtering, CRC parity error filtering, and MAC address conflict
detection.
Support MAC address learning, aging automatic
Strong aluminum panel shell structure
Support WEB configuration, configuration file up and download
Support port statue display, data update.
Support Based Tag port Tag trunking, IEEE802.3ad, 3 group trunking link
Support Port based VLAN and IEEE 802.1Q VLAN
Support GMRP, IGMP Snooping and static multicast filter
Support RSTP, recovery time<50ms
SW-RingTM redundant network patent technology, Support single ring, double ring, singe star ring,
double star ring(Fault recovery time<20ms)
Support flow statistic
Support single port and multi-port mirroring, network detection
Support rate control, Broadcast storm control, multicast storm control, unknown unicast storm
control
Support Password management and static address lock
Support absolutely and opposite priority, support IEEE802.1P, DSCP priority
Support SNMP

User manual
2www.3onedata.com
Industrial grade 4 design, -40-75℃work temperature
Support 2 input power, power supply redundancy backup, 1 relay alarm output, the natural heat
Iron shell protection grade: IP40
DIN rail mounting

User manual
3www.3onedata.com
Chapter 2 Hardware Description
2.1 Panel Design
IES6116, IES6116-2F, IES6116-4F, IES6116-6F, IES6116-8F panel design is basically the same, only the
number of different optical fiber interface.
IES6116-P (12-48VDC)
1. Systems running LED
2. The power LED
3. Relay alarm LED
4. Link/ACT LEDs
5. 10/100BaseT(X) (RJ45) ports
6. DIP switch
7. Console port
8. Relay output terminal block
9. Power input terminal block
10. Ground screw
11. DIN-Rail mount
IES6116-2F-P (12-48VDC)

User manual
4www.3onedata.com
1. Systems running LED
2. The power LED
3. Relay alarm LED
4. Link/ACT LEDs
5. 10/100BaseT(X) (RJ45) ports
6. 100Base-FX ports
7. DIP switch
8. Console port
9. Relay output terminal block
10. Power input terminal block
11. Ground screw
12. DIN-Rail mount
IES6116-4F-P (12-48VDC)
1. Systems running LED
2. The power LED
3. Relay alarm LED
4. Link/ACT LEDs
5. 10/100BaseT(X) (RJ45) ports
6. 100Base-FX ports
7. DIP switch
8. Console port
9. Relay output terminal block
10. Power input terminal block
11. Ground screw
12. DIN-Rail mount

User manual
5www.3onedata.com
IES6116-6F-P (12-48VDC)
1. Systems running LED
2. The power LED
3. Relay alarm LED
4. Link/ACT LEDs
5. 10/100BaseT(X) (RJ45) ports
6. 100Base-FX ports
7. DIP switch
8. Console port
9. Relay output terminal block
10. Power input terminal block
11. Ground screw
12. DIN-Rail mount
IES6116-8F-P (12-48VDC)
1. Systems running LED
2. The power LED
3. Relay alarm LED
4. Link/ACT LEDs
5. 10/100BaseT(X) (RJ45) ports
6. 100Base-FX ports
7. DIP switch

User manual
6www.3onedata.com
8. Console port
9. Relay output terminal block
10. Power input terminal block
11. Ground screw
12. DIN-Rail mount
2.2 Power Input
DC Series Switch:
The switch top panel provided 4 bit power supply input terminal block, support DC input. DC power supply
input supported redundancy function, provided PWR1 and PWR2 power input, can use for single, and can
connect 2 separately power supply system, use 1 pair terminal block connect the device at the same time.
If one of the power systems broke, the device can work un-interruptible. Built-in overcorrect protection,
Reverse connection protection. Voltage input range is 12～48VDC（terminal block defined as: V1-、V1+、
V2-、V2+）.
AC Series Switch:
The Industrial Ethernet switches have singe power and redundancy power two kinds of power input. The
singe power AC series top panel provides 3 bit terminal block for 100~240VAC/DC power entered (L/+,
PG, N/-)
Important notice：
1. Power ON operation: first of all, insert power cable’s terminal block into device’s power port, then insert power
supply plug into power source.
2. Power OFF operation: First off all, unpin power plug, then strike the terminal block, please takes care of
operation sequence.
2.3 Relay connection
Relay access terminals in the top panel of the device. Between the two terminal relay, as an open circuit
state in normal non alarm state, when there is any alarm information to the closed state. The two terminal
block connector are used to detect both power failure and port failure. The two wires attached to the Fault
contacts form an open circuit when the device has lost power supply from one of the DC power inputs or
one of the ports is failure. (Note: TheAC power switch does not support power alarm.)

User manual
7www.3onedata.com
2.4Console port
IES6116 series provided 1 console port based on procedure of serial port. It adopts RJ45 interface, in
front panel, can upgrade program with DB9 to RJ45 cable.
2.5 Communication port
10Base-T /100Base-TX Ethernet port
10Base-T/100Base-TX Ethernet port is located on front panel and the type is RJ45. The pinout of
RJ45 port connects to UTP or STP. The distance is not more than 100m. 100Mbps Ethernet connector
takes 120Ω of UTP 5; 10Mbps Ethernet connector takes 120Ω of UTP 3, 4, 5.
RJ 45 port supports automatically MDI/MDI-X connection. It can connect PC, Server, Converter and
HUB .Corresponding connection of Pin 1,2,3,6 is like this: 1→3, 2→6, 3→1, 6→2. The definition of Pin is
displayed as below.
Information necessary to explain:
Note: “TX±”Transmitting data±, “RX±”receiving data±, “—”no use
PIN
MDI
MDI-X
1
TX+
RX+
2
TX-
RX-
3
RX+
TX+
6
RX-
TX-
4, 5, 7, 8
—
—
1 8

User manual
8www.3onedata.com
MDI（straight-through cable）：
MDI-X（Cross over cable）：
100Base-FX fiber port
100Base-FX port works with full-duplex, SM or MM SC/ST/FC optional. The fiber port must be used
in pair, TX (transmitting) port connects remote switch‟s RX (receive) port; RX (receiving) port connect
remote switch‟s TX (transmitting) port.
Suppose: If you make your own cable, we advise to label the two sides of the cable with the same
letter (A-to-A and B-to-B, shown as below, or A1-to-A2 and B1-to-B2).

User manual
9www.3onedata.com
2.6 LED Indicator
IES6116 series LED indictors are on the front panel. The function of each LED is described in the table as
below:
System statue LED
LED
Indicator
Description
PWR1~2
(Green)
ON
P1~2 connection regularly
OFF
P1~2 Power supply have no connection or unwonted
Alarm
(Green)
ON
Power, port alarm
OFF
Power, port have no alarm
Run
(Green)
OFF/ON
Device unwonted
Blinking
Blinking 1 time/second, device working steadily
Link1~16
(Green)
ON
Established effective network connection
Blinking
Network in activity statues
OFF
Did not established effective network connection
2.7 Installation
Before installation, confirm that the work environment meet the installation require, including the power
needs and abundant space, whether it is close to the connection equipment and other equipments are
prepared or not.
1. Avoid in the sunshine, keep away from the heat fountainhead or the area where in intense EMI.
2. Examine the cables and plugs that installation requirements.
3. Examine whether the cables be seemly or not (less than 100m) according to reasonable scheme.
4. Screw, nut, tool provide by yourself.
5. Power: DC dual power supply series products 12 ~ 48VDC
AC single power supply series products 100~240VAC/DC
6. Environment: working temperature -40～75℃
Relative humidity 5%～95%
DIN-rail installation
In order to apply for industrial environments conveniently, IES6116 series adopts 35mm DIN-Rail
installation, the installation steps are as follows:
1. Examine the DIN-Rail accessories
2. Examine DIN Rail is firm or not and the position is suitable or not.
3. Insert the top of the DIN-Rail into the slot just below the stiff metal spring.
4. The DIN-Rail attachment unit will snap into place as shown below.

User manual
10 www.3onedata.com
Wiring Requirements
Cable laying need to meet the following requirements,
1. It is needed to check whether the type, quantity and specification of cable match the requirement
before cable laying;
2. It is needed to check the cable is damaged or not, factory records and quality assurance booklet
before cable laying;
3. The required cable specification, quantity, direction and laying position need to match
construction requirements, and cable length depends on actual position;
4. All the cable cannot have break-down and terminal in the middle;
5. Cables should be straight in the hallways and turning;
6. Cable should be straight in the groove, and cannot beyond the groove in case of holding back the
inlet and outlet holes. Cables should be banded and fixed when they are out of the groove;
7. User cable should be separated from the power lines. Cables, power lines and grounding lines
cannot be overlapped and mixed when they are in the same groove road.When cable is too long,
it cannot hold down other cable, but structure in the middle of alignment rack;
8. Pigtail cannot be tied and swerved as less as possible. Swerving radius cannot be too small
(small swerving causes terrible loss of link). Its banding should be moderate, not too tight, and
should be separated from other cables;
9. It should have corresponding simple signal at both sides of the cable for maintaining.

User manual
11 www.3onedata.com
Chapter 3 Appearance and Dimension
3.1 Appearance
IES6116-P (12/48VDC) IES6116-2F-P (12/48VDC)
IES6116-4F-P (12/48VDC) IES6116-6F-P (12/48VDC)

User manual
12 www.3onedata.com
IES6116-8F-P (12/48VDC)
3.2 Dimension
The series of products are the same size, and the number of the Ethernet interface is different. Unit (mm)

User manual
13 www.3onedata.com
Chapter 4 Packing List
Please check the packaging and accessories by your first using. Please inform us or our distributor if your
equipments have been damaged or lost any accessories, we will try our best to satisfy you.
Description
Quantity
3onedata Industrial Ethernet switch
1
User manual
1
CD
1
Warranty card
1
Certificate of quality
1

User manual
14 www.3onedata.com
Chapter 5 Network Configuration
IES6116 series can access, configuration and management through WEB, the user manual will introduce
the operations step by step.
5.1 Configure PC’s IP Address
IES6116 series default address is: 192.168.1.254, subnet mask is: 255.255.255.0. When entering
into IES6116 series Web interface through internet explorer, the IP address of IES6116 series and PC
must be in the same Local Area Network.
You can modify PC's or IES6116 series‟ IP address to make sure that they are in the same Local
Area Network. Operating process can follow method 1 or method 2 as below,
Method 1: Modify PC's IP address
Click Start->Control panel->network connections->Local area Connection->Properties->Internet
Protocol （TCP/IP）Setting PC‟s IP address: 192.168.1.X (X is less than 254, from 2 to 253).
Click “OK”, IP address modifies successfully
Method 2: Modify IES6116 series' IP address through BlueEyes_II manager software.
Install BlueEyes_II manager software on the PC.
Enter into BlueEyes_II management interface; click "Search" to search the device.
After searching the device, move mouse to the device, click right key, modify the device's IP address,
Please make sure the device and PC in the same Local Area Network.
This configuration example does not use the Advanced button in the last picture. In one and the same network card
allows the use of multiple IP pseudo-address when use the advanced configuration of the IP address, at which does
not change the original address can still access the switch device. But in the IGMP polling and IEEE 802.1x polling
windows system cannot handle correctly, Unix-like system does not have this problem. The advanced users have to
pay attention to this issue.

User manual
15 www.3onedata.com
Chapter 6 WEB Management
IES6116 series have WEB server inside, can manage and maintenance the device very intuitive through
WEB interface
6.1 Configurate preparing
1. The lowest requirement for user's computer is as below:
Install operating system (Windows XP/2000/Win7,etc)
Install Ethernet card
Install Web explorer (IE6.0 or higher version)
Install and start TCP/IP protocol
2. The default management IP address of IES6116 series: 192.168.1.254, subnet mask as:
255.255.255.0. Before access to the configuration interface, the computer's IP address and the switch
must be configured in the same subnet (IP address configuration, please refer to "5.1") if need local
configuration; Computers and switches must be routed reach if for remote configuration.
How to log on to Web Server
Please type in the default IP of switch on the browser‟s address bar, and then will pop-up a window
by clicking the “enter” key which shows you have to enter your user name and password. The default
username and password is “admin”. You can enter your username and password 3 times if you found the
username and password is incorrect. If the 3 input error, the browser will display a "401 Unauthorized"
error message. Refresh the page and then enter the correct user name and password, log on to the Web
Server, it will recommend to modify the user name and password. Please contact our customer service
center if you have more questions.
(Figure 6.1.1)