3One data IES608-2F Manual

YourSerialandDataCommunicationsExpert
Shenzhen3onedataTechnologyCo.,Ltd
IES608-2F
8-port 8-port 8-port 8-port10/100M 10/100M 10/100M 10/100MIndustrial Industrial Industrial IndustrialEthernet Ethernet Ethernet EthernetSwitch Switch Switch Switch
Hardware Hardware Hardware Installation Installation Installation Guide Guide Guide
IIIIntroduction ntroduction ntroduction ntroduction: :::
IES608-2Fseriesareatypeofplug-and-playindustrialmanaged
redundantEthernetswitch,whichsupports6-port10/100Base-T(x)
and2-port100Base-Fx.The7and8ports(100Base-Fx)areusedto
establishSW-Ringforthepurposeaccomplishingredundancyfor
Ethernetringnetwork(self-recoverytime<20ms)toenhancethe
reliabilityofthenetwork.
Furthermore,IES608-2Fseriescanalsosupportnumerous
intelligentnetworkmanagementfunctions,includingQoS,VLAN,
PortTrunking,velocityconfigurationandalarmenablingfunctions.
To satisfyapplicationsindifferentindustrialenvironments,
IES608-2Fseriescanalsoprovidewidetemperaturetypein
accommodationwithlimittemperature(-40~70°C).
Packing Packing Packing PackingL LLList ist ist ist: :::
TheIES608-2Fswitchisshippedwithfollowingitems.
1.EthernetswitchIES608-2F(plusterminalblock)×1
2.HardwareInstallationGuide
×1
3.CD-ROMwithWindowsUtility
×1
4.ProductWarrantyStatement
×1
5.RJ45toDB9Consoleportcable
×1
6.DIN-Railsettingfittings(wallmountingforoptional)
FFFFeatures: eatures: eatures: eatures:
Designed Designed Designed Designedfor for for forIndustrial Industrial Industrial IndustrialApplications Applications Applications Applications
1.Dualpowerbackup,Relayoutputwarningforpowerfailureand
portbreakalarm
2.Portlink,ringfault/abnormityalarmindication
3.IP30protection,ruggedhigh-strengthmetalcase
4.Redundant24VDCpowerinput（12V～36VDC）Operating
5.DIN-Railorpanelmountingability

YourSerialandDataCommunicationsExpert
Shenzhen3onedataTechnologyCo.,Ltd
Advanced Advanced Advanced AdvancedIndustrial Industrial Industrial IndustrialEthernet Ethernet Ethernet EthernetNetworking Networking Networking NetworkingCapability Capability Capability Capability
1.Storeandforward.8kaddress.SupportMACaddressfiltrate
struction
2.SW-Ring(recoverytime<20msatfullload)
3.Port-basedVLAN,IEEE802.1QVLANtoeasenetwork
planning
4.PortTrunkingforoptimumbandwidthutilization
5.Lockportfunctionforblockingunauthorizedaccessbasedon
MACaddress
6.Portmirroringforonlinedebugging
7.Bandwidthmanagementpreventsunpredictablenetworkstatus
PPPPanel anel anel anelLayout: Layout: Layout: Layout:
6666TP TP TP
ports ports ports and and and 222 fiber fiber fiber ports ports ports (IES608-2F)
ffffront ront ront rontpanel panel panel panel
Note：leftisSC,rightisST,thesameasthepictureforsingle-mode
andmulti-mode.
(IES608-2F)

YourSerialandDataCommunicationsExpert
Shenzhen3onedataTechnologyCo.,Ltd
1.Groundingscrew
2.PWR1/PWR2input,relayoutput
6bitterminalblock
3.DIPswitch:DOWNLOADPROGRAM,
RESUMEDEFAULT,SW-RingEnabled
4.DOWNLOADPROGRAMport
(RS-232,RJ45)
5.Heatdissipationorifices
6.DIN-Raillocatingkittop top top toppanel panel panel panel
7.Screwholeforwallmountingkit
8.10/100Base-T(X)port
9.Corporation,productinformation
10.RunindicationLED
11.PowerinputPWR1LED
12.PowerinputPWR2LED
13.SystemalarmindicationLED
14.Fiberport8indicationLED
15.Fiberport7indicationLED
16.100Base-FXport
back back back backpanel panel panel panel
Units Units Units Units（mm mm mm mm）

YourSerialandDataCommunicationsExpert
Shenzhen3onedataTechnologyCo.,Ltd
Communication Communication Communication Communicationconnector connector connector connector: :::
IES608-2Fserieshave8x 10/100BaseT(X)Ethernetports(RJ45)and
2x100BaseFX(SC/STconnector,optional)fiberports.
10/100BaseT(X) 10/100BaseT(X) 10/100BaseT(X) 10/100BaseT(X)Ethernet Ethernet Ethernet Ethernetport port port port
ThepinoutofRJ45portdisplayasbelow,connectbyUTPor
STP. Theconnectdistanceisnomorethan100m.100Mbpsisused
100ΩofUTP5,10Mbpsisused100ΩofUTP3,4,5.
RJ45portsupportautomaticMDI/MDI-Xoperation.can
connectthePC,Server,ConverterandHUB.Pin1,2,3,6
CorrespondingconnectioninMDI.1→3,2→6,3→1,6→2areused
ascrosswiringintheMDI-XportofConverterandHUB.
10Base-T/100Base-TXareusedinMDI/MDI-X,thedefineofPin
inthetableasbelow.
NO. NO. NO. NO.MDI MDI MDI MDIsignal signal signal signalMDI-X MDI-X MDI-X MDI-Xsignal signal signal signal
1TX+RX+
2TX-RX-
3RX+TX+
6RX-TX-
4,5,7,8
——
Note:“TX±”transmitdata±,“RX±”receivedata±,“—”notuse
MDI(straight-through MDI(straight-through MDI(straight-through MDI(straight-throughcable) cable) cable) cable)
18
1
8
RJ 45
TX +
TX -
TX -
RX +
RX +
RX -
RX -
TX +
2
3
6
1
2
3
6
1

YourSerialandDataCommunicationsExpert
Shenzhen3onedataTechnologyCo.,Ltd
MDI-X MDI-X MDI-X MDI-X( (((Cross Cross Cross Crossover over over overcable cable cable cable) )))
100BaseFX 100BaseFX 100BaseFX 100BaseFXport port port port
100Base-FXfull-duplexSMorMMport,SC/STtype.Thefiber
portmustbeusedinpair,TX(transmit)portconnectremote
switch ’ sRX(receive)port;RX(receive)portconnectremote
switch ’ sTX(transmit)port.
Theopticalfiberconnectionsupportsthelinetoinstructenhance
thereliabilityofnetworkeffectively.
Suppose Suppose Suppose Suppose:Ifyoumakeyourowncable,wesuggestlabelingthetwo
sidesofthesamelinewiththesameletter(A-to-AandB-to-B,
shownasbelow,orA1-to-A2andB1-to-B2).
1
8
RJ 45
TX +
TX -
TX -
RX +
RX +
RX -
RX -
TX +
2
3
6
1
6
1
2
3
( TX -)
( RX +)
( RX -)
( TX +)
( TX +)
( TX -)
( RX +)
( RX -)

YourSerialandDataCommunicationsExpert
Shenzhen3onedataTechnologyCo.,Ltd
LED LED LED LEDIndicator Indicator Indicator Indicator: :::
LEDindictorlightonthefrontpanelofIES608-2FSeries.the
functionofeachLEDisdescribedinthetableasbelow.
System System System Systemindication indication indication indicationLED LED LED LED
LED LED LED LEDState State State StateDescription Description Description Description
PWR1 PWR1 PWR1 PWR1ONPowerisbeingsuppliedto
powerinputPWR1input
OFFPowerisnot not not notbeingsuppliedto
powerinputPWR1input
PWR2 PWR2 PWR2 PWR2ONPowerisbeingsuppliedto
powerinputPWR2input
OFFPowerisnot not not notbeingsuppliedto
powerinputPOWER2input
Alarm Alarm Alarm AlarmONWhenthealarmisenabled,
powerandtheport’slinkis
inactive.
OFFPowerandtheport
’ slinkis
active,not not not notalarm
Run Run Run RunON/OFFSwitchisunwonted
BlinkingSwitchisactive
100BaseFX 100BaseFX 100BaseFX 100BaseFXport port port portstate state state stateLED LED LED LED(7, (7, (7, (7,8) 8) 8) 8)
Link Link Link Link
(IES608-2F)
ONFXportisactive
BlinkingDataisbeingtransmitted
OFFFXportisinactive
10/100BaseT(X) 10/100BaseT(X) 10/100BaseT(X) 10/100BaseT(X)Ethernet Ethernet Ethernet Ethernetport port port portstate state state stateLED LED LED LED
10M/100M 10M/100M 10M/100M 10M/100M
(yellow)
ON100Mbpsisactive(100Base-TX)
OFF10Mbpsisactive(10Base-T)
Link/ACT Link/ACT Link/ACT Link/ACT
(green)
ONTPportisactive
BlinkingDataisbeingtransmitted
OFFTPportisinactive
(IES608-2F) (IES608-2F) (IES608-2F)

YourSerialandDataCommunicationsExpert
Shenzhen3onedataTechnologyCo.,Ltd
Relay Relay Relay Relaycontact contact contact contact: :::
Therelayconsistsofthetwomiddlecontactsoftheterminalblock
onIES608-2Fseriestoppanel.Thetwoterminalblockconnectorare
usedtodetectbothpowerfaultsandportfaults.Thetwowires
attachedtotheFaultcontactsformanopencircuitwhen:
(1)IES608-2FserieshavelostpowerfromoneoftheDCpower
inputs,or(2)OneoftheportsforwhichthecorrespondingPort
alarmDIPSwitchissettoONisnotproperlyconnected.
Ifneitherofthesetwoconditionsoccur,thealarmcircuitwillbe
closed.
Power Power Power PowerInput Input Input Input: :::
IES608-2Fserieshaveredundantpowerinput,providestwoterminal
block(3bits)forPWR1andPWR2input.Theredundantpowercan
beusedsingleandusedtwoself-governedpowertosupplytothe
system,PWR1andPWR2inputatthesametime,whenneitherof
thesetwopowerfails,theotherpoweractsasabackup,and
automaticallysuppliespowerneeds,ensurerunningEthernet
reassuring.

YourSerialandDataCommunicationsExpert
Shenzhen3onedataTechnologyCo.,Ltd
Switch Switch Switch SwitchSettings: Settings: Settings: Settings:
Provide4bitswitchforfunctionsetting(ONisenable):1(ISP)is
DOWNLOADPROGRAM,2isRESUMEDEFAULT,3isSW-Ring
Enabled,4isblank(NC).Whentheswitchissetup,mustberestart.
DOWNLOAD DOWNLOAD DOWNLOAD DOWNLOADPROGRAM PROGRAM PROGRAM PROGRAMport port port port: :::
IES608-2FseriesprovideoneDOWNLOADPROGRAMport
(RJ45type),onthetoppanel,managethesystemwithPCby
RJ45-DB9Fadapter.
Installation Installation Installation Installation：
Beforeinstallation,confirmthattheworkenvironmentmeetthe
installationrequire,includingthepowerneedsandabundantspace.
whetheritisclosetotheconnectionequipmentandother
equipmentsarepreparedornot.
Installation Installation Installation Installationrequire require require requireas as as asbelow below below below
1.Avoidinthesunshine,keepawayfromtheheatfountainheador
theareawhereinintenseEMI.
2.Examinethecablesandplugsthatinstallationrequirements.
3.
Examinewhetherthecablesbeseemlyornot(lessthan100m)
accordingtoreasonablescheme.
4.Screw,nut,toolprovideforyourself.
5.Powerneed:Redundant,dual24VDCpowerinputs(12~36DC）
6.Environment:-40°Cto75°C
StorageTemperature:-45°Cto85°C
Relativehumidity10%to95%
DIN-Rail DIN-Rail DIN-Rail DIN-RailInstallation Installation Installation Installation
Inordertouseinindustrialenvironmentsexpediently,IES608-2F

YourSerialandDataCommunicationsExpert
Shenzhen3onedataTechnologyCo.,Ltd
seriesadopt35mmDIN-Railinstallation,theinstallationstepsas
fellows:
1.ExaminetheDIN-Railattachment
2.ExamineDINRailwhetherbefirmandthepositionbe
suitabilityornot.
3.InsertthetopoftheDIN-Railintotheslotjustbelowthestiff
metalspring.
4.TheDIN-Railattachmentunitwillsnapintoplaceasshown
below.
Wiring Wiring Wiring WiringRequirements Requirements Requirements Requirements
Besuretodisconnectthepowercordbeforeinstallingand/orwiring
yourEthernetSwitch.
Calculatethemaximumpossiblecurrentineachpowerwireand
commonwire.Observeallelectricalcodesdictatingthemaximum
currentallowableforeachwiresize.Ifthecurrentgoesabovethe
maximumratings,thewiringcouldoverheatmaycausingserious
damagetoyourequipment.Youshouldalsopayattentiontothe
followingitems:
1.Useseparatepathtoroutewiringforpoweranddevices.Ifpower
wiringanddevicewiringpathsmustcrossmakesurethewires
areperpendicularattheintersectionpoint.
2.NOTE:Donotrunsignalorcommunicationswiringandpower
wiringinthesamewireconduit.Toavoidinterference,wires
withdifferentsignalcharacteristicsshouldberoutedseparately.
3.Youcanusethetypeofsignaltransmittedthroughawireto
determinewhichwiresshouldbekeptseparate.Theruleof

YourSerialandDataCommunicationsExpert
Shenzhen3onedataTechnologyCo.,Ltd
thumbisthatwiringthatsharessimilarelectricalcharacteristics
canbebundledtogether.
4.Keepinputandoutputwiringseparated.Itisstronglyadvised
thatyoulabelwiringtoalldevicesinthesystemwhennecessary.
Specifications: Specifications: Specifications: Specifications:
Interface Interface Interface Interface
RJ45Ports:10/100BaseT(X)autoconnection,Full/Halfduplexor
forceworkmode,andsupportMDI/MDI-Xconnection
FiberPorts:100BaseFXports(SC/STconnector,optional)
Single-mode:20,40,60,80,120Km,optional
Multi-mode:2,5Km,optional
Wavelength:850nm,1310nm,1550nm
DOWNLOADPROGRAMPort:Basedserialnetworkmanagement
(RS-232),RJ45
Alarmoutputinterface:Onerelayalarmoutput.Supportpower,
portlinkandringnetworkalarm.
Indicator:Portlink,ringfault/abnormityalarmindication
10M/100MRate,runindication
Technology Technology Technology Technology
Standards:IEEE802.3for10BaseT,IEEE802.3xforFlowControl,
IEEE802.3ufor100BaseTXand100BaseFX,IEEE802.1Qfor
VLANTagging,IEEE802.1pforClassofService
TransmitRate:148810pps
MaxRateofFiltrate:148810pps
Processingtype:StoreandForward
Systemexchangebandwidth:4.8G
Support8KMACaddress
Port-BasedVLAN
RRRRelay elay elay elay
Maxvoltage:DC30V
Maxcurrentinput:1A
Power Power Power Power
InputVoltage:24VDC(12VDC~36VDC)
OverloadCurrentProtection
Supportdualpowerbackup