3PLUS L42A User manual

OWNER’S MANUAL
Sports Bracelet
L42A

1
Overview
1) Operating conditions
2) Articles in the box
3) Charging
4) App setup
5) Wearing the device
6) Cleaning the device
7) Screen operation
8) Device operation
a) Time/date interface
b) Activity
c) Heart rate
d) Record workout
e) Sleep tracker
f) Notifications
g) APPS
9) Customer support
10) Troubleshooting
11) Supported devices
12) Product specifications
13) Remarks
14)
FCCSTATEMENT

2
1. Operating Conditions
Operating temperature
-20°C to 55°C
Water resistance
Splash proof
The band can be used during daily cleansing or in midst of
rain, as long as only the surface is exposed to water and no
water pressure is exerted on the device.
Do not shower with the device or submerge it under water.
Day-to-day waterproof functionality.
Battery
Up to 7 days of battery life.

3
2. Articles in the box
A B C
D E
A：VIBE Smartwatch
B：Quick Start Guide
C：Charging cradle
D：Micro-USB cable
E：Owner’s Manual

4
3. Charging
1.Position the charging cradle to connect to the back of
your tracker while making sure the pins match the contact
points on the device and the charging cradle. The
magnetic attraction should then snap them together in
place.
2. Insert the micro-USB cable into the charging cradle,
and then connect the USB plug into a power source. A
"Charging" icon will be shown on the screen to indicate
that it’s charging.
Tip: Make sure to completely charge your device
before first use. A full charge will take approximately
two hours (depending on the power source).

5
4. App Setup
To set up your band with a mobile device,
you must first download and install the
3PLUS ELITE APP from either the Apple
APP store or Google Play store.
Connecting the APP
1. Turn on the Bluetooth on your mobile device (if
not already on).
2. Open the 3PLUS ELITE APP on your mobile device.
a. If you are a new member, you will need to register a
new account. Be sure to enter your personal information
accurately in the given prompts.
b. If you are an existing member, you can just input your
login email address and password.
3. After logging in, choose the 3PLUS-VIBE option to
start the pairing process.
4. Select the detected VIBE # code. This should be the
same code that shows up on your VIBE device's screen.
(Note: The tracker must be near your mobile phone in order
for it to detect it.)

6
5. A connection request will be shown on your
smartwatch. Tap on the green check mark to confirm the
Bluetooth pairing.
6. When the tracker is connected successfully, both
your tracker and mobile device will receive a notification.
If the connection is not successful, please repeat the same
steps to try again.
(Note: The Bluetooth pairing is a one-time process. If you
would like to connect the band with a different account,
you must un-pair the existing connection first through the
App settings.)

7
5. Wearing the Device
1. Wrap the device around your wrist and pull the band
through the hole in the buckle.
2. Pull the band until the device feels slightly tight on
your wrist but it should be able to slide slightly back
and forth on your wrist.
3. Insert the buckle pin through one of the band's holes
to secure the band in place.
4. You may use the clamp to further secure the bands
together.

8
6. Cleaning the Device
Make sure to clean regularly
It is strongly recommended to regularly clean your
device’s band after workouts or prolonged use. Moisture
from sweat and dirt from other means can build up
underneath the band and can cause skin irritation.
Use water or rubbing alcohol
DO NOT use soaps, sanitizers, or household cleaners to
clean the band.
Dry the band before use
Make sure to clean and dry the band well before putting it
back on.

9
7. Screen Operation
Turn on the device by either double tapping the screen or
pressing one of the side buttons.
The device will only respond when the specific sensor area
is tapped.
The screen will turn off after 10 seconds of inactivity.
Hold down both buttons simultaneously for 3 seconds to
completely turn off the device.
Perform the same action again to turn it back on.

10
Screen operations can be performed by touching the
screen with your finger tip and with the two side buttons.
Slide left or right on the screen's surface to change the
screen and menu options.
Press the left side button to go back to the main screen,
and the right side button to back to the previous screen.

11
8. Device Operation
Main Screens
Time / Date
Activity
Heart Rate
Record Workouts
Sleep Tracker
Notifications
APPS

12
Time/Date interface
Time and date on your band will automatically be
synchronized with the connected mobile device.
You can also setup your preferred watch face through the
settings of 3PLUS ELITE APP.
Please make sure there is sufficient battery charge on
your band to avoid resetting the time.

13
Activity
Your daily steps, distance, calories burned, and active
minutes can be monitored from the band. You may swipe
through the screens to check the current daily activity
data for each or you can use the 3PLUS ELITE APP to
check your activity data and historical data.
Note: The band is set to reset your daily activity
every day at midnight.

14
Homepage Weekly Timeline Monthly Timeline
You can also check your daily goal completion through the
3Plus Elite APP's main page and see detailed figures of
your daily, weekly, and monthly performance by tapping
the activity column.
Your band will store your activity
data for up to 7 days, so remember
to synchronize your band and APP
regularly to keep accurate daily
records.

15
Heart rate
Heart rate (OFF) Heart rate (ON)
To activate the heart rate monitor, switch to the heart
rate interface and tap the heart on the screen. It will
activate automatically and will begin to continuously
record your heart rate.
To turn off the heart rate monitor, simply tap the heart
icon on the heart rate screen.
Note: The continuous heart rate monitor uses a
significant amount of battery. Leaving the heart rate
monitor on all day is not advised and recommended
only during exercise periods.

16
For all day heart rate monitoring, use the Heart Rate
“Auto Track” setting from the 3Plus Elite app.
Heart rate alert:
You can select your heart-rate alert zone at the “Settings”
section of your 3PLUS ELITE APP.
This is typically helpful during your exercises to make
sure you stay within your target zone.
Heart rate too high
Heart rate too low

17
Record Workout
The VIBE is capable of recording your workouts so you can
keep track of your results from exercise routines.
When you’re ready to record your workout, select the
“Record Workouts” option from the main interface. Then
press the “Play” button begin recording.
You can also pause and continue the recording at any time
during your workout. To finish recording, tap the “Finish”
icon to complete it.

18
Workout results will be displayed
once the recording is completed:
Time, Steps, Distance, Calories
Burned, Average Heart Rate.
You can view your entire
workout history list from the
3Plus Elite app from the menu
option. Make sure you’re
improving from each workout
to obtain maximum results.

19
Sleep tracker
The VIBE is capable of monitoring
your sleep quality and will record
your sleep patterns.
Press the “Play” button to have the
watch start tracking your sleep.
Tap the “Chart” button to view previous sleep history.