3
Notes:
Press Navigation key for one time to active or lock remote control. If there is no any LED light
on the remote control, it means there is no power, please connect micro USB cable to charge
up the battery, an the left re LED will sparkle while charging. If you can’t use remote
control any more, please try to check co es:
Press” mute + Zoom Out” buttons together for 3 secon s, LED will quickly flash, then slowly
flash for three times within 15 secon s, this means successfully one.
Start Up Connecting your player
To use your player, you nee to connect it to your TV, your network, an a power source.
1. Plug the power a aptor to power up your player.
2. Connect your player to your TV by using HDMI or composite cable epen ing on your TV.
3. For stan ar stereo soun (2-channels, left/right), use the re an white connectors on the
composite cable. For surroun soun (5.1 au io), use either an HDMI or optical au io cable,
if available.
NOTE: If you use an HDMI cable, you on’t nee separate au io an vi eo cables.
Even if you use a high-resolution setup, au io/vi eo quality may be compromise base on
the spee of your broa ban Internet connection.
4. Connect your player to a broa ban network with sufficient ban wi th to receive live
streams (2.0 Mbps or greater). See “Connecting your player to your home network” for
etails.
5. To view vi eos through your player, you must connect your player to your home network
using either a wireless or wire connection. Your home network must have broa ban
Internet access, so that your player can access the Internet when it is connecte to your
home network. A minimum connection spee of 1.5Mbps is require . However, we
recommen using a connection that is 2.0Mbps or faster. If you’re using a wire connection,
follow these steps to connect your player to your network.
6. Connect one en of a CAT5 ethernet cable to the ethernet jack on your player. Connect the
other en of the ethernet cable to your Internet router.
NOTE: If you’re using a wireless connection, you on’t nee to connect an ethernet cable
Setting up your player
After you connect your player, as escribe in the previous chapter, you’re rea y to access
your player an complete Gui e Setup to set up your wireless network connection (if
