A4Tech X-772FS User manual

4x3 Fire Gaming Mouse
User Guide
Model: X-772FS
www.a4tech.com

Knowing the Mouse
Click “6th Button” with the
different indicated color to quickly
change the DPI levels. And you
don’t need any driver for this
4-Way Scrolling
Tilt wheel technology scrolls in 4
directions for greater efficiency.
In the game-play, one click on the
“3xFire Button”, 3 bullets will be
shot sequentially and your target is
destroyed in the seconds.
In Windows’ operation, the “3xFire
Button” works as “Double Click” and
one click on the file will open it
instantly.
▉Except “Left Button” and “6th Button”, all the buttons are
programmable to implement all play commands as shortcuts by
“Smart-X7” Software.
▉Tilt-Wheel: It provides extra convenience while
browsing a wide page with “Leftwards” and
“Rightwards” scrolling functionality.
Hardware Installation (Connecting the mouse)
Step 1: Insert the USB mouse connector into the USB port of your computer.
Step 2: The mouse will automatically be recognized by your computer.
Step 3: If you can’t find the USB mouse on the screen, follow the steps below:
1. Unplug and re-plug the mouse.
2. Test the device on another USB port or computer.
The mouse is plug and play. No Driver is required. If you would like to customize the buttons on the mouse. Please install the enclosed

(CD) first.
Software Installation
Installing “Smart-X7” software (Note: The driver is applicable to Windows 2000, XP, XP (x64), 2003(x64) and VISTA x86.)
A. Before installing the Smart-X7, uninstall any previous mouse
driver.
B. Insert the enclosed driver (CD) to start installation. Then you’ll
see a “Figure C” pop up. (shown as the below figure)
Figure. C
F. The mouse icon “ ” will appear on the right bottom of the task
bar , then you have successfully installed the driver.
OR
Go to START, and then select PROGRAM. If you see “A4Tech
Hardware >> Mouse >>Smart-X7” in the program list, then you
have successfully installed the driver. (Otherwise, installation is
failed and you have to remove the driver and re-install.)
C. Click “Install Driver” of the Smart-X7 to install the driver in
Figure.C.
D. Follow the on-screen steps to finish Smart-X7 software
installation.
E. When the installation is completed, restart your computer.
To remove the driver, follow the steps below:
Go to START, then select PROGRAMS >> A4Tech Hardware >>
Mouse >> Uninstall Smart-X7.

To Program your Mouse Buttons
MOUSE PROPERTIES
1. Double click on the mouse icon “ ” will bring you the mouse properties. (as illustration on
left “Mouse Properties”)
2. If the mouse image appears in the mouse properties menu looks exactly the same as the
mouse on hand, then you have successfully installed the Smart-X7 driver.
In the first section of the mouse properties menu, there is a mouse image and each accessible
key is remarked with a number, which is responding to the numbers as listed to the right. For
example, button #1 is assigned as “Main Button” by default and it is not programmable.
How to set X7-Jump Function
(LEARN TO SIMULATE KEYBOARD’S COMMANDS AND PROGRAM XY SENSITIVITY INDEPENDENTLY)
The X7-Jump not only provides program XY sensitivity independently, but also can be set in any of the buttons from # 2 to # 5
of simulation functions for the keyboard.

1. Double clicks on the mouse icon “ ” will bring you the
mouse properties. (Figure A)
Fig. A
2. One Click on X7-Jump and you’ll see the pop up window (Figure B),
then, you will see 2 Parts:
Fig. B
Let’s enjoy all the innovative features of the mouse step by step as follows:
Section I: Change Mouse DPI:
“DPI Setting” and “Color Indication”
DPI Levels
(Default) Indicating Color: Recommended for: Suitable Resolution of
display（Recommended）
400 No light Slow-speed and normal accuracy player 640×480
800DPI Green Medium-speed and average accuracy required player 1024×768
1200DPI Yellow Fast Speed and above average accuracy required
player
1152×864
1600DPI Red High-Speed and pinpoint accuracy required player 1280×1024
2000DPI Red & Yellow
coruscating
Extra High-Speed and pinpoint accuracy required player 1280×1024
Click the 6th key to quickly shift and indicate from 400、800、1200、1600 to as high as 2000 DPI.
• Part One is Changing
Mouse DPI.
• Part Two is Keystrokes.

Set mouse XY axis sensitivity levels
It can Shift from pixel-precise targeting to fast-twitch maneuvers without stopping the action. This avoids the error in operation for more
efficiency. You can configure your mouse as synchronism or non-synchronism higher/lower with many parameters to control the X/Y dpi by
yourself in this smart X7 Software.
400 No light 200DPI-400DPI
800DPI Green 200DPI-800DPI
1200DPI Yellow 200DPI-1200DPI
1600DPI Red 200DPI-1600DPI
2000DPI Red & Yellow coruscating 200DPI-2000DPI
Two ways to change mouse DPI mode to get the suitable mouse speed:
1. Just click the “6th Button” to change the DPI mode:
2. Select the option “enable change DPI” at “X7-jump” function dialogue-box; the DPI value can be adjusted by clicking the arrow or by
typing the numerical value into it.

Section II: Keystrokes
To ADD Keystrokes: Click on the button “New Keystroke” and you’ll see a “Keystroke” window
pop up. (shown as the right figure)
Here you will see 3 radio buttons:
zPress and hold will input keystrokes consecutively.
zPress and hold will only input once the keystrokes.
zPress will input keystrokes consecutively; press again will release the keystrokes.
If you select the 1st radio button, it means you would like to have the mouse completely
simulate the keyboard’s keystroke – when you press and hold a key on the keyboard, it will
input a character consecutively.
If you select the 2nd radio button, it means you would like to have the mouse partially simulate
keyboard’s keystrokes – when you press and hold a key on the keyboard, it will only input once
unless you lift it and press it again.
If you choose the 3rd radio button, it means that you should have the mouse button
automatically simulate the keyboard’s keystrokes – when you press and hold a key on the
keyboard, it will automatically keep inputting a character unless you press the mouse button
assigned again.
Let’s do some examples together…
Example 1: Select 1st Radio Button
1. Click on “Record” (Reference: Figure A).
2. Press “R” on the Keyboard.
3. Click “OK”.
4. It will bring you back to previous page.
(Fig. A)

5. Now click on “Keystrokes (R)”, the one you just created.
6. Select the Mouse Button (green icon) on the Mouse Image to your right to store the
“Keystrokes (R)”.
7. Green icon will turn red once it is selected (Figure B).
8. Click “Apply” >> “OK”.
We have stored it in mouse Button # 3.
Let’s try it on regular word document or on game application (Counter Strikes).
zTry it on Word document. Press and hold your mouse button #3. Did you see
the character “RRRRRRR” inputted consecutively?
zTry it on game application. Press and hold your mouse button # 3. In Counter
Strike, “Keystrokes (R)” means to add bullets. Did you see it adding bullets? If
yes, you have successfully created a command.
Example 2: Select 1st Radio Button
1. Click on “Ctrl+A” (Reference: Figure C).
2. Press “Ctrl+A” on the Keyboard.
3. Click “OK”.
4. It will bring you back to previous page.
5. Now click on “Keystrokes (Ctrl+A)”, the one you just created.
6. Select the Mouse Button (green icon) on the Mouse Image to your right to store the
“Keystroke (Ctrl+A)”.
7. Green icon will turn red once it is selected (Figure D).
8. Click “Apply” >> “OK”.
We have defined it in “Mouse Button # 3”.
(Fig. B)
(Fig. C)

Let’s check it in Word file practically.
Press mouse button #3, it will select all the words when it is clicked on an opened Word
document, just the same like you press the “Ctrl+A” provided by your operating system.
Example 3: Select 2nd Radio Button
1. Click on “Record” (Figure E).
2. Press “A4TECH” on the Keyboard.
3. Click “OK”.
4. It will bring you back to previous page.
5. Now click on “Keystrokes (A4TECH)”, the one you just created.
6. Select the Mouse Button (green icon) on the Mouse Image to your right to store the
“Keystrokes (A4TECH)”.
7. Green icon will turn red once it is selected. (Figure F)
8. Click “Apply”, then “OK”.
We have stored it in “Mouse Button # 4”.
Let’s try it on regular Word document and on game application.
zTry it on Word document. Press and hold your mouse button #4.
Did you see the character “A4TECH” appears once even though the mouse button is
pressed and held? This is partially simulation. You may store your most frequently
used words, for instance, you first name.
zTry it on game application. Press and hold your mouse button # 4.
In Counter Strike, “Keystrokes (A4 TECH)” means nothing. So when you try it in counter
strike, nothing is happened.
Example 4: Select 3rd Radio Button
1. Click on “Record”.
(Fig. D)
(Fig. E)
Fig. F

2. Press “Z “on the Keyboard (Figure G).
3. Click “Stop” to stop recording >> then click “OK”.
4. It will bring you back to previous page.
5. Now click on “Keystroke (Z)”, the one you just created.
6. Select the Mouse Button (green icon) on the Mouse Image to your right to store the
“Keystroke (Z)”.
7. Green icon will turn red once it is selected. (Figure H).
8. Click “OK”.
We have stored it in “Mouse Button # 5”.
Let’s try it
zPress and hold your mouse button # 5.
In BF2 (FPS Game), “Keystroke (Z)” means to hunker down.
Did you see yourself hunkering down unless you don’t re- press the button #5 to Stop its
automatic typing”?
zTry it on Word document. Press and hold your mouse button #5. Did you see the
character “ZZZZZZZZZ” is inputted consecutively unless you press the button #5 again to
stop it? If yes, you have successfully created a command.
TECH SUPPORT
For tech support, please visit our website at http://support.a4tech.com/ or email us at
[email protected]
Fig. G
Fig. H