Aacraft Go Hang It PRO User manual

B
D
F
A
E
C
REMOVABLE LEVEL - Snaps o and sets on
the top edge of your frame to level your
pictures.
REMOVABLE PUSH PIN - Used to mark nail
holes through the HOOKS (see g. E.) when
hanging pictures with wire hangers.
MAGNEKEYS - Remove and insert into the
notch of our SINGLE-NOTCH PRECISION
HANGERS, sawtooth or D-ring hangers to
perfectly mark your nail holes.
CENTER BUTTON - Telescopes and extends
the base of the unit for wire-hanging
pictures. Simply push the button and pull.
BUILT-IN HOOKS - Used to suspend wire
hanger pictures on the wall where desired.
Insert the PUSH PIN into the guide holes to
mark where your nails go.
SILICONE LATCH - Keeps the removable
hardware case, with 85 pieces of picture-
hanging hardware, attached to the unit.
GET TO KNOW GO HANG IT! PRO
A
B
C
D
E
F
© Aacraft, Inc. Georgetown, Texas. All rights reserved. Go Hang It!
is a trademark of Aacraft, Inc. Patent pending. MADE IN CHINA
12 Single-Notch Precision Hanger
24 Self-Tapping Screws
10 Picture Hooks (10 lb)
8 Picture Hooks (20 lb)
4 Picture Hooks (30 lb)
10 Nails 1.7x25
10 Nails 2.0x30
6 D-Hooks
8 FT Hanging Wire
(fits 10 lb Hooks)
HARDWARE ESSENTIALS INCLUDED

SAWTOOTH
PUSH PUSH
1
2
3
4
SAWTOOTH/D-RING PICTURE HANGING
INSERT MAGNEKEYS
Remove the MAGNEKEYS and insert into sawtooth,
D-Ring, or our SINGLE-NOTCH PRECISION HANGERS.
1EXTEND & HOOK
Press CENTER BUTTON to extend the
base. Suspend the frame wire on the
BUILT-IN HOOKS, then position and LEVEL
picture. Use the two, outer HOOKS for
heavier frames and the single HOOK for
lighter frames.
MARK HOLES
Pressing rmly against the wall, remove
your frame from the HOOKS . Locate the
removable PUSH PIN (located beneath
the LEVEL) and mark nail holes through
the HOOK guide holes.
2
LEVEL & MARK HOLES
Place removable LEVEL on top edge of the frame.
Position and level frame on wall, then rmly push
directly over hangers to mark your nail holes.
INSTALL HARDWARE
Locate the marks on the wall made by MAGNEKEYS.
Install nails straight into the wall marks.
HANG YOUR PICTURE
3
4
INSTALL HARDWARE
Locate the marks on the wall made by the
PUSH PIN. Install picture hook hardware.
HANG YOUR PICTURE
WIRE PICTURE HANGING
See it in action at
GoHangIt.com
@gohangit @go.hang.it.
Works with most picture hanging hardware.
Suggested weight limits:
Nails in wood studs - 50 lbs
Nails in drywall - 10 lbs
!
D-RING