Aaeon NVR-6300S User manual

Network Video Recorder
N V R - 6300S
NVR-6300S
Network Video Recorder
3.5" Hot-Swappable SATA HDD Tray x 12
2.5” HDD Tray x 1
Gigabit Ethernet x 2
USB3.0 x 4, USB2.0 x 3
VGA x 1, DisplayPort x 1, HDMI x 1
NVR-6300S Manual 1st Ed.
August 4, 2014

Network Video Recorder
N V R - 6300S
i
Copyright Notice
This document is copyrighted, 2014. All rights are reserved. The
original manufacturer reserves the right to make improvements to the
products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, or for any in-
fringements upon the rights of third parties that may result from its
use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have been
made in the preparation of this document to assure its accuracy,
AAEON assumes no liabilities resulting from errors or omissions in
this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.

Network Video Recorder
N V R - 6300S
ii
Acknowledgments
All other products’name or trademarks are properties of their
respective owners.
AMI is a trademark of American Megatrends Inc.
CompactFlash™is a trademark of the Compact Flash
Association.
Intel®is a trademark of Intel®Corporation.
Microsoft Windows®is a registered trademark of Microsoft Corp.
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
SoundBlaster is a trademark of Creative Labs, Inc.
All other product names or trademarks are properties of their
respective owners.

Network Video Recorder
N V R - 6300S
iii
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
1 DVD-ROM for Manual (in PDF Format) and Drivers
1 NVR-6300S
If any of these items should be missing or damaged, please
contact your distributor or sales representative immediately.

Network Video Recorder
N V R - 6300S
iv
Contents
Chapter 1 General Information
1.1 Introduction................................................................ 1-2
1.2 Features .................................................................... 1-3
1.3 Specifications ............................................................1-4
Chapter 2 Hardware Installation
2.1 Locations of Jumpers and Connectors of the Main
Board............................................................................... 2-2
2.2 Mechanical Drawing of the Main Board ....................2-3
2.3 Mechanical Drawing of NVR-6300S.......................... 2-4
2.4 List of Jumpers of the Main Board ............................2-5
2.5 List of Connectors of the Main Board........................ 2-5
2.6 Setting Jumpers ........................................................2-7
2.7 Clear CMOS (CMOS)................................................ 2-8
2.8 Auto Power Button (JP1)...........................................2-8
2.9 Front Panel Connector (FP1)....................................2-8
2.10 Front Panel Connector (FP2)..................................2-8
2.11 USB2.0 Port PIN Header ........................................2-8
2.12 USB3.0 Port PIN Header ........................................ 2-9
2.13 Installing the Slim Optical Drive and 3.5” Hard Disk
Drive.............................................................................. 2-10
Chapter 3 AMI BIOS Setup
3.1 System Test and Initialization. ..................................3-2
3.2 AMI BIOS Setup........................................................3-3

Network Video Recorder
N V R - 6300S
v
Chapter 4 Driver Installation
4.1 Installation ................................................................. 4-3
Appendix A I/O Information
A.1 I/O Address Map...................................................... A-2
A.2 Memory Address Map...............................................A-4
A.3 IRQ Mapping Chart...................................................A-5
A.4 DMA Channel Assignments......................................A-7

Network Video Recorder
N V R - 6300S
vi
Below Table for China RoHS Requirements
产品中有毒有害物质或元素名称及含量
AAEON Boxer/ Industrial System
部件名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件
×
○
○
○
○
○
外部信号
连接器及线材
×
○
○
○
○
○
外壳
×
○
○
○
○
○
中央处理器
与内存
×
○
○
○
○
○
硬盘
×
○
○
○
○
○
电源
×
○
○
○
○
○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：
一、此产品所标示之环保使用期限，系指在一般正常使用状况下。
二、上述部件物质中央处理器、内存、硬盘、电源为选购品。

Network Video Recorder
N V R - 6300S
Chapter 1 General Information 1- 1
General
Information
Chapter
1

Network Video Recorder
N V R - 6300S
Chapter 1 General Information 1- 2
1.1 Introduction
NVR-6300S adopts the Intel®CoreTM i3/ i5/ i7 Processor and equips
with Intel®Q87 chipset. Moreover, the system memory features four
dual channel DDR3 1600MHz DIMM non-ECC Memory up to 32GB.
It deploys two LAN ports that consist of 10/100/1000Base-TX
Ethernet RJ-45 ports.
This NVR-6300S supports up to 12 3.5" hot-swappable HDD trays
and one 2.5” SATA HDD Tray x 1, Slim Optical Disk Drive x 1.
Moreover, the flexible expansion interfaces feature one PCI-E[x16]
and one PCI-E[x4] (signal [x2]). In addition, this model supports
up to four USB3.0 ports and three USB2.0 ports. Furthermore, the
NVR-6300S can support three independent displays with one VGA,
one DisplayPort and one HDMI.

Network Video Recorder
N V R - 6300S
Chapter 1 General Information 1- 3
1.2 Features
LGA 1150 Socket for 22nm Intel® Core™ i3/i5/i7 Processor,
Max. 65W TDP
Dual-Channel 240-pin DDR3 1600MHz DIMM x 4, Up to
32GB
3 Graphic Displays Interface: HDMI x 1, DisplayPort x 1, VGA
x 1
Intel® 10/100/1000Base-TX Ethernet x 2
SATA x 14, SATA 1~6 Support RAID 0/1/5/10, SATA 7~14:
RAID (Optional)
USB 2.0 x 3, USB 3.0 x 4, Onboard COM Header x 2
PCI-E [x16] x 1, PCI-E [x4] x 1 (Signal [x2])
Audio Jack x 3 (Mic-in/Line-in/Line-out)
Hot-Swappable 3.5” SATA HDD Tray x 12 + Hot-swappable
2.5” SATA HDD Tray x 1, Slim Optical Disk Drive x 1
Supports PoE Function

Network Video Recorder
N V R - 6300S
Chapter 1 General Information 1- 4
1.3 Specifications
System
CPU
Intel®LGA Socket 1150 with Intel
Core™i3/i5/i7 Processor,
Max.TDP: 65W
Chipset
Intel®Q87
System Memory
Dual Channel DDR3 1600 DIMM
Memory x 4, non-ECC, up to 32GB
BIOS
AMI BIOS, 128 Mb SPI flash ROM
H/W Monitoring
CPU Temperature, Voltage, and
Fan speed monitoring
Ethernet
10/100/1000Base-TX, RJ-45 x 2
LAN 1: Intel®PHY I217LM Gigabit
LAN ( supports AMT 9.0)
LAN 2: Intel®I211AT Gigabit LAN
Watchdog Timer
System reset: 1~255 steps by
software programming
TPM
Infineon SLB9635 TT 1.2
(optional)
I/O Chip
IT 8728F
Storage
SATA6.0 Gb/s x 14 (SATA 1~6:
support RAID 0/1/5/10, SATA
7~14: optional RAID support)

Network Video Recorder
N V R - 6300S
Chapter 1 General Information 1- 5
Expansion Slot
PCI-E [x16] x 1
PCI-E [x4] x 1 (Signal [x2])
Power requirement
ATX standard 24-pin connector x
1, 8-pin +12V connector x 1, CPU
fan x 1, System fan with 4-pin
wafer x 1, Supports Smart Fan
control
Mechanical
Front Door
Front door cover with lock for HDD
security
Dimension
19”x 23.82”x 6.97”(482.7mm x
605mm x 177 mm)
Gross Weight
47.3 lb (21.5 Kg)
Net Weight
31.02 lb (14.1 Kg)
Environmental
Operating Temperature
32°F ~ 104°F (0°C ~ 40°C)
Storage Temperature
-4°F ~ 158°F (-20°C ~ 70°C)
Storage Humidity
5%~95%, non-condensing
I/O Connectors
KB & MS
PS/2 keyboard (purple) x 1
PS/2 mouse (green) x 1
USB
USB3.0 x 4, USB2.0 x 3

Network Video Recorder
N V R - 6300S
Chapter 1 General Information 1- 6
Serial Port
COM x 2 (Box header 2.0mm x 2)
Audio
Audio Jack x 3 (Mic-in/ Line-in/
Line-out)
Display Port
VGA x , DisplayPort x 1, HDMI x 1
Remark: When operating 4K*2K monitor, please use HDMI port ONLY
since NVR-6300S has compatible limitation on Display Port.

Network Video Recorder
N V R - 6300S
Chapter 2 Hardware Installation 2-1
Hardware
Installation
Chapter
2

Network Video Recorder
N V R - 6300S
Chapter 2 Hardware Installation 2-2
2.1 Locations of Jumpers and Connectors of the Main Board
Component side

Network Video Recorder
N V R - 6300S
Chapter 2 Hardware Installation 2-3
2.2 Mechanical Drawings of the Main Board
Component side

Network Video Recorder
N V R - 6300S
Chapter 2 Hardware Installation 2-4
2.3 Mechanical Drawings of NVR-6300S

Network Video Recorder
N V R - 6300S
Chapter 2 Hardware Installation 2-5
2.4 List of Jumpers of the Main Board
The board has a number of jumpers that allow you to configure your
system to suit your application.
The table below shows the function of each of the board's jumpers:
Label
Function
JP1
AUTO POWER BUTTOM
CMOS1
Clear CMOS
2.5 List of Connectors of the Main Board
The board has a number of connectors that allow you to configure
your system to suit your application. The table below shows the
function of each board's connectors:
Label
Function
FP1
Front Panel Connector 1
FP2
Front Panel Connector 2
CN14
PCIEX16 Connector
CN15
PCIEx4 Connector
CN17
POE Signal Connector
CN19
POE Power Connector
CN20
LAN1 Connector
CN21
LAN2 Connector
CN22
PS2 KB/MS Connector
CN23
VGA / HDMI Connector
DP1
Display Port Connector

Network Video Recorder
N V R - 6300S
Chapter 2 Hardware Installation 2-6
USB5
USB3+USB2 Connector
AUDIO1
Audio Connector
DIMM1
DDR3 DIMM Slot
DIMM2
DDR3 DIMM Slot
DIMM3
DDR3 DIMM Slot
DIMM4
DDR3 DIMM Slot
BT1
Battery
SATA1~SATA14
SATA Connector
CPU_FAN1
4-Pin Fan Connector
SYS_FAN1
4-Pin Fan Connector
SYS_FAN2
4-Pin Fan Connector
ATX1
24-Pin ATX Power Connector
ATX2
8-Pin ATX Power Connector
USB1
USB3 Connector
USB2
USB2 Connector
USB3
USB2 Connector
USB4
USB2 Connector
COM1
RS-232 Connector
COM2
RS-232 Connector

Network Video Recorder
N V R - 6300S
Chapter 2 Hardware Installation 2-7
2.6 Setting Jumpers
You configure your card to match the needs of your application by
setting jumpers. A jumper is the simplest kind of electric switch. It
consists of two metal pins and a small metal clip (often protected by
a plastic cover) that slides over the pins to connect them. To “close”
a jumper you connect the pins with the clip.
To “open” a jumper you remove the clip. Sometimes a jumper will
have three pins, labeled 1, 2 and 3. In this case you would connect
either pins 1 and 2 or 2 and 3.
123
Open Closed Closed 2-3
A pair of needle-nose pliers may be helpful when working with
jumpers.
If you have any doubts about the best hardware configuration for
your application, contact your local distributor or sales
representative before you make any change.
Generally, you simply need a standard cable to make most
connections.