Aaeon HSB-811P User manual

Half-size CPU Card HSB-811P
HSB-811P
Onboard Intel® Celeron®M
600/ non-cache Processors
Half-size CPU Card
With DDR, Ethernet,
CompactFlash™&MiniPCI
HSB-811P Manual Rev. A 2nd Ed.
May 2009

Half-size CPU Card HSB-811P
i
Copyright Notice
This document is copyrighted, 2009. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result
from its use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information
contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.

Half-size CPU Card HSB-811P
ii
Acknowledgments
All other products’ name or trademarks are properties of their
respective owners.
 Award is a trademark of Award Software International, Inc.
 CompactFlash™ is a trademark of the Compact Flash
Association.
 Intel®Pentium®M, and Celeron®M are trademarks of Intel®
Corporation.
 Microsoft Windows®is a registered trademark of Microsoft Corp.
 ITE is a trademark of Integrated Technology Express, Inc.
 IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
 SoundBlaster is a trademark of Creative Labs, Inc.

Half-size CPU Card HSB-811P
iii
Packing List
Before you begin installing HSB-811P, please make sure that
the following items have been shipped:
• 1 HSB-811P CPU Card
• 1 Floppy Cable
• 1 ATA-100 Cable
• 1 USB Cable
• 1 PS/2 Keyboard & Mouse Cable
• 1 Serial + Parallel Cable
• 1 Serial Cable
• 1 ATX Cable
• 1 Quick Installation Guide
• 1 CD-ROM for manual (in PDF format) and drivers
If any of these items are missing or damaged, please contact
your distributor or sales representative immediately.

Half-size CPU Card HSB-811P
iv
Contents
Chapter 1 General Information
1.1 Introduction................................................................1-2
1.2 Feature......................................................................1-4
1.3 Specification..............................................................1-5
Chapter 2 Quick Installation Guide
2.1 Safety Precaution......................................................2-2
2.2 Location of Connectors and Jumpers .......................2-3
2.3 Mechanical Drawings................................................2-5
2.4 List of Jumpers..........................................................2-7
2.5 List of Connectors .....................................................2-7
2.6 Setting Jumpers ........................................................2-9
2.7 Clear CMOS (JP1) ....................................................2-10
2.8 LCD Voltage Selection (JP2) ....................................2-10
2.9 Front Panel Connector (FP1)....................................2-10
2.10 Front Panel Connector (FP2)..................................2-10
2.11 RS-232 Serial Port Connector (COM1)...................2-10
2.12 RS-232/422/485 Serial Port Connector (COM2).....2-11
2.13 IrDA Connector (IR1)...............................................2-11
2.14 LPT Port Connector (LPT1) ....................................2-11
2.15 USB Connector (USB4) ..........................................2-12
2.16 Fan Connector (FAN1)............................................2-12
2.17 ATX Power Control Connector (CN1).....................2-12

Half-size CPU Card HSB-811P
v
2.18 AC97 Connector (CN2)...........................................2-12
2.19 LVDS Channel Connector (CN3)............................2-13
2.20 PS/2 keyboard & Mouse Connector (CN4).............2-14
2.21 Internal Keyboard Connector (CN5)........................2-14
2.22 LAN LED Connector (CN6).....................................2-14
Chapter 3 Award BIOS Setup
3.1 System Test and Initialization. ..................................3-2
3.2 Award BIOS Setup....................................................3-3
Chapter 4 Driver Installation
4.1 Installation.................................................................4-3
Appendix A Programming The Watchdog Timer
A.1 Programming .........................................................A-2
A.2 ITE8712F/HX Watchdog Timer Initial Program.....A-6
Appendix B I/O Information
B.1 I/O Address Map....................................................B-2
B.2 Memory Address Map............................................B-3
B.3 IRQ Mapping Chart................................................B-4
B.4 DMA Channel Assignments...................................B-4
Appendix C Mating Connector
C.1 List of Mating Connectors and Cables ................ C-2

Half-size CPU Card HSB-811P
Chapter 1 General Information 1-1
General
Chapter
1
Information

Half-size CPU Card HSB-811P
Chapter 1 General Information 1-2
1.1 Introduction
Introducing AAEON’s new HSB-811P, powered by Intel®
Celeron®M 600/non-cache processor on board, mini PCI half-size
form factor single board computer (SBC) with an onboard VGA,
10/100/1000Mb LAN optional and five USB 2.0 ports, support
LVDS.
The target market of HSB-811P will focus on Shoe-box application
and Digital Video Recorder (DVR). Releasing the HSB-811P will
complete AAEON’s product line in Penitum®4 level short card
series and provide customers higher performance and better quality
product.
HSB-811P is a high performance with low power consumption SBC
which deployed Intel®82852GM chipset. The chipset supports
CPU frequency up to 1.8GHz with front side bus running at 400MHz.
In addition, HSB-811P is integrated on Intel® 852GM AGP 4X,
supported dual display and AC97 Codec Audio for optional Audio
daughter board. The lower height and power consumption the
HSB-811P has, the more AAEON can satisfy industrial customers
needs.
HSB-811Palso provides high memory capacity up to 2GB DDR

Half-size CPU Card HSB-811P
Chapter 1 General Information 1-3
DRAM (DDR 266) and support Ultra ATA100 & CompactFlash™
Type II storage. In addition to its powerful computing engine, one
Mini PCI socket Type III provides flexible application on wireless
LAN, Blue tooth…etc.
Five USB 2.0 ports provide an expandable, Plug and Play serial
interface that ensures a standard low-cost connection for peripheral
devices. Industrial applications will benefit from the five USB 2.0
ports by three pin-headers and on Type A connector onboard,
offering 480 Mbps high-speed efficiency and value without
compromising performance.
Moreover, HSB-811P is also equipped with Intel®Ethernet
controllers. One of these provides superior 1GB Mbps networking
access ability for high speed networking applications such as
gateway, VPN and Mini server.
The HSB-811P is a versatile onboard Intel®Celeron®M
600/non-cache CPU compact board with the best cost-performance
for CTI, networking and mini-server markets.

Half-size CPU Card HSB-811P
Chapter 1 General Information 1-4
1.2 Feature
• Onboard Intel®Celeron®M 600/non-cache CPU
• DDR266 Memory Supports Up to 2GB
• Integrated AGP 4X 2D/3D Graphics Accelerator,
LVDS Support
• Integrated AC97 Codec Audio (Daughter Board
Optional)
• Supports One 10/100/1000Base-T Ethernet
(10/100&GbE Optional)
• Supports Ultra ATA100 & CompactFlashTMType-II
Storage
• Supports Mini-PCI Type III Socket
• 5 USB2.0/ 1 RS-232, 1 RS-232/422/485/ 1 Parallel/ 1
IrDA Port
• Watchdog Function 1~255 Sec.

Half-size CPU Card HSB-811P
Chapter 1 General Information 1-5
1.3 Specification
System
 CPU: Support onboard Intel®
Celeron®M 600/non-cache
CPU
 Chipset: Intel®82852GM+82801DB
(ICH4)
 I/O Chipset: Intel®82801DB(ICH4)+ITE
8712F/HX
 Ethernet: 10/100Mb or 10/100/1000Mb
LAN optional, RJ-45 x 1;
Intel®82562EZ or 82541GI
controller
 System Memory: 200 pins 2.5V DDR SODIMM
Socket x 2, total up 2GB,
support DDR memory
(DDR266)
 BIOS: Award Plug & Play BIOS –
4Mb ROM
 Watchdog Timer: 1~255 step, can be set with
software on Super I/O
 Compact Flash: CFD type II connector (Hot
swappable)
 Expansion Interface: PICMG/PCI;

Half-size CPU Card HSB-811P
Chapter 1 General Information 1-6
mini-PCI Type III socket
 Battery: Lithium battery (BR2335)
 Power Supply Voltage: +12V ATX, Standard ATX
Power Connector
 VGA Controller: Integrated on
Intel®82852GM, AGP 4X,
supports dual display
 LCD Controller: Integrated on
Intel®82852GM,LVDS output,
supports dual display
 Floppy Drive Interface: Standard FDDx1, supports
up to two floppy devices
 Audio Daughter Board: Realtek ALC655 AC97
Codec, MIC-in/ Line-in/
Line-out/ CD-in
 IDE Interface: ATA-100 x 2 channels
(Supports two ATAPI
devices)
 Universal Serial Bus: USB 2.0 Port x 5
5 x 2 pin header for internal
x1; Type-A connector
onboard x 3
 IR Interface: Supports IrDA header x 1
 RTC: Internal RTC
 Operation Temp: 0℃~60℃

Half-size CPU Card HSB-811P
Chapter 1 General Information 1-7
Display
 Chip: Intel®82852GM
 Memory size: Shared memory up to 64MB
I/O
 Enhanced IDE Interface：ATA100 x 2 channels
(supports two ATAPI
devices for each channel)
 FDD Interface: Standard FDD port x 1
(support up to 2 floppy
devices)
 Serial Ports: Two COM ports: Internal Pin
Header, External D-sub x2
COM 1: RS-232
COM 2: RS-232/422/485
 Parallel Port: Support SPP/EPP/ECP
mode
 K/B & Mouse connector:Mini-DIN for PS/2 K/B and
Mouse connector x 1
Internal keyboard pin
header x 1
 IrDA：IrDA Tx/Rx header x 1
 USB：5 x 2 pin header x 1;
USB 2.0 ports x 5;
Type-A connector
onboard x 3

Half-size CPU Card HSB-811P
Chapter 1 General Information 1-8
OS Support Request
 Windows®98SE
 Windows®2000 Pro
 Windows®XP Pro
 Linux Red Hat
 Windows®CE.net (By demand)
 Windows®XP Embedded (By demand)

Half-size CPU Card HSB-811P
Chapter 2 Quick Installation Guide 2-1
Quick
Installation
Chapter
2
Guide
Notice:
The Quick Installation Guide is derive
d
f
rom Chapter 2 of user manual. For othe
r
chapters and further installation
instructions, please refer to the use
r
manual CD-ROM that came with th
e
p
roduct.
Part No. 2007811P11 Printed in Taiwan May 2009

Half-size CPU Card HSB-811P
Chapter 2 Quick Installation Guide 2-2
2.1 Safety Precaution
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis

Half-size CPU Card HSB-811P
Chapter2 QuickInstallationGuide2-3
2.2 Location of Connectors and Jumpers
Component Side
VGA1
IDE1
IDE2
USB1
USB2
USB3
LAN1
CN4
USB4
COM2
COM1
LPT1
FP2
FP1
FDD1
ATX2
ATX1
CN1
FAN1
JP2
CN3
CN2
IR1
CN6
CN5
MPCI1
JP1

Half-size CPU Card HSB-811P
Chapter 2 Quick Installation Guide 2-4
Solder Side
CFD1
DIMM0
DIMM1

Half-size CPU Card HSB-811P
Chapter2 QuickInstallationGuide2-5
2.3 Mechanical Drawings
Component Side
118.013.99
3.99 177.98 3.02
4.01
98.5
19.48
16.51
184.99
122
4.45
0.51
12.27
30.48
13.84
9.32
1.6
14.5
6.5
13.4
6.27
12.55
14.1
9.3727.69
52.9275.82
83.95
92.07

Half-size CPU Card HSB-811P
Chapter 2 Quick Installation Guide 2-6
Solder Side
184.99
16.51
98.54.01
3.02 177.98 3.99
3.99
118.01
122
4.45
12.27 30.48 13.84 9.32