Aaeon PER-V02B User manual

Mini PCI TTL to DVI Module PER-V02B
PER-V02B Quick Installation Guide 1
Notice
This guide is designed for experienced users to setup the system in
the shortest time.
Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working
on it. Do not make connections while the
power is on, because a sudden rush of power
can damage sensitive electronic
components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap
at all times. Place all electronic components
on a static-dissipative surface or in a
static-shielded bag when they are not in the
chassis
Part No. 2007V02B11 Printed in Taiwan Jan. 2007

Mini PCI TTL to DVI Module PER-V02B
PER-V02B Quick Installation Guide 2
A Message to the Customer
Fist of all, thank you for purchasing PER-V02B Mini PCI TTL to DVI
Module. This Quick Installation Guide will help you on the process of
the installation. Please read it thoroughly before you start to install it.
The product comes with a sheet of warranty for two years
assurances except for improper use. Therefore, we strongly suggest
you to read and refer to the Quick Installation Guide before any
installation. You may visit AAEON website for the latest version of
the instruction. Please refer to http://www.aaeon.com

Mini PCI TTL to DVI Module PER-V02B
PER-V02BQuickInstallationGuide3
Product Warranty
AAEON Customer Services
All products in AAEON are designed as the strictest specifications to
ensure that the products will own the reliable performance in the
typical industrial environments. Whether your purchase from
AAEON is made to the purpose of the laboratory or the factory
facility, you can be assured that every purchase in AAEON will
provide the reliability and stability of operation.
Your satisfaction is our primary concern. Here is a guide for
AAEON's customer services. Ensure you get the full benefits of our
services, please follow the instructions below step by step.
Technical Support
We require you to get the maximum performance from your products.
If you run into technical difficulties, we’ll be here always for you. For
the most frequently asked questions, you can easily find solutions in
your product documentation. The guide is for your quick and
accurate installation so please refer to it first. We strongly suggest
you to read it before asking for a customer service over the phone. If
you still cannot find the answer, gather all questions you can think of
and have the product at hand before giving a call to your dealer. All
dealers of AAEON are well-trained and ready to provide you as
many supports as we can. Based on the customer service we’ve
encountered until now, most of problems are minor and able to be

Mini PCI TTL to DVI Module PER-V02B
PER-V02B Quick Installation Guide 4
easily solved over the phone. In addition, free-charged technical
support is available from AAEON engineers in the office time. We
are always pleased to give advice regarding to any installation and
operation for AAEON products.

Mini PCI TTL to DVI Module PER-V02B
PER-V02BQuickInstallationGuide5
Ordering Information
• PER-V02B-A10
Mini PCI TTL to DVI LCD Signal Conversion Module
Packing List
• TTL LCD Cable
• Quick Installation Guide
• PER-V02B
Optional Accessories
• 1700200200 DVI Cable
• 1703400207 TTL Cable

Mini PCI TTL to DVI Module PER-V02B
PER-V02B Quick Installation Guide 6
Content
A Message to the Customer..............................................2
Product Warranty.............................................................3
Ordering Information ........................................................5
Packing List.....................................................................5
Optional Accessories........................................................5
1.1 Features....................................................................7
1.2 Specifications.............................................................7
1.3 Location of Jumpers and Connectors ...........................8
1.4 Mechanical Drawing....................................................8
1.5 List of Jumpers...........................................................9
1.6 PIXS & EDGE Selection (JP1).....................................9
1.7 List of Connector ........................................................9
1.8 DVI Internal Connector (DVI1) .....................................9
1.9 DVI External Connector (CN2)...................................10
1.10 TTL_LCD DF13-10P Connector (CN1) (Optional) ...... 11
1.11 TTL_LCD DF13-40P Connector (CN3)...................... 11
1.12 TTL_LCD DF13-20P Connector (CN4)...................... 12
1.13 Power Connector (CN5) ..........................................13

Mini PCI TTL to DVI Module PER-V02B
PER-V02BQuickInstallationGuide7
1.1 Features
• Supports TTL to DVI LCD Signals Conversion
• Resolution Supports up to 1600 x 1200
1.2 Specifications
• Form Factor: Mini PCI Type III A
(50.8mmx59.6mm)
• Signal Conversion Chipset: Silicon Image Sil1160CTU
• Power Request: +3.3V
• Operating Temperature: 32˚F~140˚F (0˚C~60˚C)

Mini PCI TTL to DVI Module PER-V02B
PER-V02B Quick Installation Guide 8
1.3 Location of Jumpers and Connectors
9
1
17
16
8
24
CN1
CN5
JP1
CN2
DVI1
CN4
CN2
1.4 Mechanical Drawing
9
1
17
16
8
24
0.00
0.00
6.35
7.75
31.69
0.31
39.62
0.00
6.47
0.33
7.59
14.03
33.54
18.37
28.18
7.58
47.36
46.86
39.62
26.90
0.00
46.86
43.20
53.40
(53.02)
(29.85)
(6.66)
(10.00)
(5.40)
(5.40)
(0.80)
(10.86)
(43.12)

Mini PCI TTL to DVI Module PER-V02B
PER-V02BQuickInstallationGuide9
1.5 List of Jumpers
Label Function
JP1 PIXS Select &EDGE Select
1.6 PIXS & EDGE Selection (JP1)
Label Function
1-3 Two
p
ixel
p
er clock
(
for 36/48-bits
)
3-5 One pixel per clock (for 18/24-bits)(Default)
2-4 Latched on the rising edge of IDCK
4-6 Latched on the falling edge of IDCK (Default)
1.7 List of Connector
Label Function
DVI1 DVI Internal Connector
CN1 TTL_LCD DF13-10P Connector
CN2 DVI External Connector
CN3 TTL_LCD DF13-40P Connector
CN4 TTL_LCD DF13-20P Connector
CN5 POWER Connector
1.8 DVI Internal Connector (DVI1)
Pin Signal Pin Signal
1 DVI_TX2- 2 DVI_TX2+
3 GND 4 NC
5 NC 6 DDC_CLK
7 DDC_DATA 8 NC

Mini PCI TTL to DVI Module PER-V02B
PER-V02B Quick Installation Guide 10
9 DVI_TX1- 10 DVI_TX1+
11 GND 12 NC
13 NC 14 +5V
15 GND 16 HPDET
17 DVI_TX0- 18 DVI_TX0+
19 GND 20 NC
21 NC 22 GND
23 DVI_TXC+ 24 DVI_TXC-
1.9 DVI External Connector (CN2)
Pin Signal Pin Signal
1 DVI_TX1+ 2 DVI_TX1-
3 GND 4 GND
5 DVI_TXC+ 6 DVI_TXC-
7 GND 8 +5V
9 HPDET 10 +5V
11 DVI_TX2+ 12 DVI_TX2-
13 GND 14 GND
15 DVI_TX0+ 16 DVI_TX0-
17 NC 18 NC
19 DDC_DATA 20 DDC_CLK

Mini PCI TTL to DVI Module PER-V02B
PER-V02BQuickInstallationGuide11
1.10 TTL_LCD DF13-10P Connector (CN1) (Optional)
Pin Signal Pin Signal
1 GND 2 GND
3 O_BLUE0 4 O_BLUE1
5 O_GREEN0 6 O_GREEN1
7 O_RED0 8 O_RED1
9 GND 10 GND
1.11 TTL_LCD DF13-40P Connector (CN3)
Pin Signal Pin Signal
1 +5V 2 +5V
3 GND 4 GND
5 +3.3V 6 +3.3V
7 GND 8 GND
9 E_BLUE0 10 E_BLUE1
11 E_BLUE2 12 E_BLUE3
13 E_BLUE4 14 E_BLUE5
15 E_BLUE6 16 E_BLUE7
17 E_GREEN0 18 E_GREEN1
19 E_GREEN2 20 E_GREEN3
21 E_GREEN4 22 E_GREEN5
23 E_GREEN6 24 E_GREEN7
25 E_RED0 26 E_RED1

Mini PCI TTL to DVI Module PER-V02B
PER-V02B Quick Installation Guide 12
27 E_RED2 28 E_RED3
29 E_RED4 30 E_RED5
31 E_RED6 32 E_RED7
33 GND 34 GND
35 ODCK 36 VSYNC
37 DE 38 HSYNC
39 NC 40 NC
1.12 TTL_LCD DF13-20P Connector (CN4)
Pin Signal Pin Signal
1 GND 2 GND
3 O_BLUE2 4 O_BLUE3
5 O_BLUE4 6 O_BLUE5
7 O_BLUE6 8 O_BLUE7
9 O_GREEN2 10 O_GREEN3
11 O_GREEN4 12 O_GREEN5
13 O_GREEN6 14 O_GREEN7
15 O_RED2 16 O_RED3
17 O_RED4 18 O_RED5
19 O_RED6 20 O_RED7

Mini PCI TTL to DVI Module PER-V02B
PER-V02BQuickInstallationGuide13
1.13 Power Connector (CN5)
Pin Signal
1 +12V
2 GND
3 GND
4 +5V
Note:
1. Connecting CN3 for 18-bit, 24-bit LCD.
2. Connecting CN3 & CN4 for 18-bit, 24-bit, 36-bit LCD.
3. Connecting CN3 & CN4 & CN1 for 18-bit, 24-bit, 36-bit, 48-bit
LCD.
4. CN5 is not needed if plugging in Mini PCI slot.
5. Please use either DVI1 or CN2 for DVI output. DVI1 and CN2
cannot be used simultaneously.