A&L Furniture Harmony User manual

Assembly Instructions
Harmony Home Table
Thank you for choosing Furniture Co.
We hope that this table brings you many years of enjoyment!
For help with assembling your furniture,
or if you have missing hardware, please email us at
[email protected] or call us at 814-349-8203

PARTS (included)
2½” Bolts (4)
Allen Wrench (1)
NO TOOLS NEEDED
photo 1
Table Top (1)
Legs (4)
STEP 1
Lay the table top upside down on a clean surface. Place the four table legs at all four corners of the table
top with the hole in the legs turned in toward the metal corner brackets. Now insert the 2½” bolts through
the brackets that are attached to the table skirting and screw into the metal inserts in the legs. (See photos
1 & 2.) Tighten the bolts with the Allen wrench.
b
a
HARDWARE (included)
photo 2
photo 3
A
B
STEP 2
Set the table upright and check for stability. If it rocks, adjust the levelers on the bottom of the legs as need-
ed. (See photo 3.) You should be able to turn these with your fingers. (If you cannot you may have to use
pliers.)
B
B B
B
A
a
B