A&L Furniture Hickory Swivel Bar Chair User manual

Assembly Instructions
Hickory Swivel Bar Chair
Thank you for choosing Furniture Co.
We hope that this piece brings you many years of enjoyment!
For help with assembling your furniture,
or if you have missing hardware, please email us at
[email protected] or call us at 866-896-5747

PARTS (included)
Chair Seat (1)
Chair Base (1)
¼” x 1¾” Bolts (4)
Flange Nuts (4)
Allen Wrench (1)
TOOLS NEEDED
7/16” Wrench
b
c
a
STEP 1
Place the chair seat on the base and lift the front of the seat up a little bit. (See photo 1.) Insert 2 bolts
through the swivel and push them down through the predrilled holes in the base. (See photo 2.) Now you
will need to spin the seat around a half turn to repeat the procedure in the back (the swivel bracket is
angled and has a wider opening on one side. Therefore, you need to spin the seat partway around for the
last 2 bolts).
STEP 2
You should now have 4 bolts sticking down through the bottom of the base. (See photo 3.) Attach the
flange nuts and tighten with 7/16” wrench. (See photo 4.)
HARDWARE (included)
photo 1 photo 2
photo 3 photo 4
A
B
a a
b
b
b
b