A&L Furniture Hickory Solid Wood End Table User manual

Assembly Instructions
Hickory Solid Wood
End Table, Coffee Table & Console Table
with Shelf
Thank you for choosing Furniture Co.
We hope that this piece brings you many years of enjoyment!
For help with assembling your furniture,
or if you have missing hardware, please email us at
[email protected] or call us at 866-896-5747

PARTS (included)
Table Top (1)
Table Legs (2)
Shelf (1)
b
a
photo 1 photo 2
2¾” Bolts (4)
1½” Bolts (4)
Allen Wrench (1)
inset photo
HARDWARE (included)
c
STEP 2
Get someone else to hold the shelf in place (see photo 3) while you align the holes in the leg crosspieces
with the holes on the bottom of the shelf. Insert 1½” bolts through the crosspieces and turn them into the
metal inserts on the shelf bottom (see photo 4). Now you are ready to tighten all the bolts using the Allen
wrench provided. (Do not overtighten.) Once this is done set table upright and check for stability. If it rocks
adjust levelers as needed (see inset photo). You should be able to turn these with your fingers. (If you
cannot you may have to use pliers.)
STEP 1
Lay table top upside down on a clean surface. Place table legs on table top with notches on legs against
the table skirting (see photo 1). Now insert 2¾” bolts through the brackets that are attached to the table
skirting and turn into the inserts on table legs (see photo 2). Do not fully tighten the bolts until shelf is
attached.
photo 3 photo 4
a
b
b