A&L Furniture Poly Kids Table User manual

Assembly Instructions
Poly Kids Table
Thank you for choosing Furniture Co.
We hope that this piece brings you many years of enjoyment!
For help with assembling your furniture,
or if you have missing hardware, please email us at
[email protected] or call us at 866-896-5747

Benches (2)
Top (1)
HARDWARE (included)
2¾” Bolts (8)
2” Lag Screws (4)
Flat Washers (4)
Allen Wrench (1)
TOOLS NEEDED
Hammer
7/16” Wrench or Socket
Legs (2)
Braces (2)
STEP 2
Set the table upright and lay the benches across the top of the legs. Insert a 2¾” bolt through the 2x2 on
the bench & turn into the threaded insert in the legs. Tighten with the Allen wrench.
b
c
a
a
a
a
b
b
d
PARTS
STEP 3
Lay the table upside down again & attach the braces. Place one end of the brace in the center of the table
top & other end flush with top of leg brace. Put a ¼” washer on a 2” lag screw & turn in with 7/16” wrench or
socket. (Holes are not predrilled as lags are self drilling.)
STEP 1
Lay the top upside down on a clean, level surface. Set the legs on inside of the 2x2 strips attached to the
top. Insert two 2¾” bolts through the predrilled holes in the 2x2 strips & turn into the threaded inserts in the
top of the legs. Tighten with the Allen wrench.
D
D
c
c