Abocom VDSL to Ethernet Bridge VE1000 User manual

VE1000
VDSL to Ethernet Bridge
VE1000 is aVDSL to Ethernet Bridge that represents an end-to-end VDSLsolution for a10Mbps Ethernet over a
twisted-pair wire. This Ethernet toPhone Line Bridge seamlessly extends your high speedInternet connection, or
your existing Ethernet network, to any room in the building or house with a telephone jack. All phone line network
products have been designed to operate on the telephone wire installedin homes throughoutthe world.
Those telephone linesutilize all the same modular patch cords and connectors commonly used for telephones. The
VE1000 provides 10 Mbps speed access at distance up to 4000ft by sharing the existing phone line with Plain Old
Telephone Service. Toinstall a VDSLLAN or access the Internet, you just simply pluginto the existingRJ-11
telephone jack. With nothing to configure or minor configure and no additional wiring to install, your network isup
and running in minutes. Thereis no needfor special splitters, terminators or filters. Itis also noneed to modifythe
existing wiring atall.
Feature
* 10Mbps data rate auto-negotiation and auto-MDIX.
* Featurefull duplex modethat doubles thenetwork connection speed.
* Easy toread LED indicators.
* Easy touse
* VDSL Performance Data Rate: 10 Mbps, full duplex Distance: 4000 ft.
* Provides optimal rate/research performance
* Higher ratesby limiting reach (symmetrical 12.5Mbps up to4000 ft.)
Specification
* Connector:
-- Two RJ-11 telephone jack: One used to connectto VDSL Line.
The other oneused to connect to ISDN or POTS.
-- One RJ-45:Use to connectto LNA cable.
-- Power Jack: Connect to Power adapter.
* Network Specification
IEEE 802.3 10BaseTWindows NT 4.x,
Windows 95 (OSR2.x)/ 98/ 98SE / ME/ 2000 /XP