Abocom PLS342 User manual

1/2
UPA 200Mbps 4 ports Ethernet Switch
- One Power Line Port
- Four 10/100Mbps Ethernet Ports
Description
The PLS342 provides convenient powerline access to
office/family users by sharing a simple AC power line
network. Embedded In-Home AV (200Mbps) interface
enables you to connect 4 PC Ethernet ports to another PC’s
at other end of power line, and not limited by the wall o
r
layer that block RF wireless communication.
Features
 One Power Line Port
 Four 10/100Mbps Ethernet Ports
 One button security
 Three levels throughput indication

2/2
Product outlook
Specification
Main Chipset DS2 DSS9010+ DSS7800 + Realtek RTL8306
Standard support UPA DHS (200 Mbps) PLC, IEEE 802.3 & 802.3u.
Interface One powerline port, four 10/100Mbps Ethernet ports.
One security button, one factory-reset button, one stand-by button.
Power AC 100~240V/ 50~60Hz/ 0.15A; 8W/230V max.; 7W/110V max.
Dimension (W x D x L) 121.4 mm x 100 mm x 28.5 mm.
LED PWR/AP: Red & Green
Green On: EP type,
Orange On: Fixed AP type,
Orange-Green Blinking: Security setup mode.
Off: Power Off.
PLC/SPD: Red & Green
Green On: Powerline speed over 12Mbps,
Orange On: Powerline speed between 12Mbps and 6Mbps,
Red On: Powerline speed under 6Mbps,
Blinking: Powerline in activity.
Off: Powerline in no-link.
LAN (1-4): Yellow-Green
On: Ethernet in link
Blink: Ethernet in activity.
Off: Ethernet in no-Link
Operating Operating Temperature: 0~40ºC (32~104ºF)
Relative Humidity: 10%~90% non-condensing
Storage Temperature: -10~70ºC (14~158ºF)
Relevant Humidity: 5%~95% non-condensing
CERTIFICATIONS FCC Part 15, Part B, Class B, CE Class B(EN55022/EN55024),
UL 60950-1, CB.