Abocom HSM1402 User manual

HSM1402
Manageable 14-port HomePNA Plus 2 Fast Ethernet Switch
INTRODUCTION
The manageable 14-port HomePNA Switch is a device utilizing the existing telephone wiring within a building to
deliver data and does not interrupt regular voice services. Data and voice run simultaneously on the same pair of
wire without any rewiring. It is suitable for hotel/motel, multi-tenant apartment, multi-tenant commercial,
multi-tenant student dorm, campus and local loop. This switch supports a concentrator mode, where each of the
ports is dedicated to directly communicate with the Uplink/downlink ports. This mode ensures that data from any of
ports 1-14 cannot be directly seen by another port. This feature, therefore, provides data privacy to subscribers.
LINE1
LINE2
PNA1
PNA2
LINE3
LINE4
PNA3
PNA4
LINE5
LINE6
PNA5
PNA6
LINE7
LINE8
PNA7
PNA8
LINE9
LINE10
PNA9
PNA10
LINE11
LINE12
PNA11
PNA12
LINE13
LINE14
PNA13
PNA14
Console
UPLINK
(Management)
DOWNLINK
135 791113
2 4 6 8 101214
HomePNA
EtherNet
Power
Warni ng
100
LINK/
100
LINK/
The manageable 14-port HomePNA Switch is designed to eliminate unnecessary network traffic, and relieve
congestion by delivering dedicated bandwidth for each of the ports. Able to begin operating after power-up, the
switch will learn addresses automatically, and begin forwarding packets at full wire-speed to any of the outputs.
Additionally, this switch comes with the full network management functions such as SNMP, Web-browser, Telnet,
Windows GUI tool and Local Console management. Moreover, the switch can be operated stand-alone or can be
cascaded to stack up with multiple units to provide low cost network solutions.
SPECIFICATIONS
Network Connection
Totally 14 HomePNA 1.1 ports, each port has 2 RJ-11 connectors
 One has built-in low-pass filter for PBX/PSTN connection
 The other is passing-through for HomePNA client connections
 The transmitting power for each HomePNA port can be adjusted
 The receiving threshold for each HomePNA port can be adjusted
2 10/100 Fast Ethernet ports
 Compliant with IEEE802.3/802.3u, 10/100BASE-TX standard
 Full Duplex supported
 IEEE 802.3x compliant Flow Control supported for full-duplex
 Advanced MDI/MDIX auto crossover feature
1 Console port for out-of-band management
Switching and Management Function
Switching functions
 Layer 2 switching based on MAC address
 Store and Forward packet switching
 Broadcast Storm rate filtering
 8K MAC address table supported
 Port-based VLAN supported(up to 14 VLAN groups)
 Overlapping VLAN supported
Management functions
 SNMP MIB I management agent supported
 Windows GUI configuration/management program supported
 Local console management supported
 Telnet management supported
 Web management supported
- 1 -

HSM1402
Manageable 14-port HomePNA Switch
 Management item list

Port enable/disable

Port status monitor

Transmitting power control for each port

Receiving sensitivity control for each port

VLAN configuration

Transmit/Receive Counters
Mechanic & ID Design
Nameplate design
LED indicators
 Each HomePNA port: Link/Act
 Fast Ethernet Port: Link/Act, 100M
 Power, Warning
Case
 1U height, metal case
 19-inch, 1U size
 1 build-in 40X40 mm fan
Physical & Environmental
 AC input
100 - 240 VAC, 50/60 Hz
Internal universal power supply
 Operating temperature
0 - 50 °C
 Storage temperature:
-25 - 55 °C
 Humidity
- 5% - 95%, non-condensing
 Power consumption:
22.5W Maximum
EMC certifications:
 FCC part 15 class A
PTT certification
 FCC part 68
- 2 -