ABS EFIS121 User manual

ABS Applied Biometric Systems GmbH
Rev.0.100
User’s Manual EFIS121 Page
1
Ethernet fingerprint image scanner EFIS121
User’s Manual

EFIS121 User’s Manual Page
2
Table of Contents
Table of Contents.................................................................................................................................2
1. Product Specifications.....................................................................................................................3
1.1 External Dimensions _______________________________________________________________________ 3
1.2 Biometric sensor __________________________________________________________________________ 3
1.3 Interface_________________________________________________________________________________ 3
1.4 Power supply_____________________________________________________________________________ 3
1.5 Other____________________________________________________________________________________ 3
1.6 Software_________________________________________________________________________________ 3
2. Hardware Installation.....................................................................................................................4
2.1 Connectors description...........................................................................................................................4
2.2 Default IP address switch.......................................................................................................................5
3. Functionality....................................................................................................................................7
4. Contact..............................................................................................................................................9

EFIS121 User’s Manual Page
3
1. Product Specifications
The EFIS121 is Ethernet fingerprint image scanner based on sweeping fingerprint
sensor from Atmel. It is designed for easy integration into security and/or service
systems.
EFIS121 supports
- 10/100 Mbps Ethernet interface
- 2 access modes, TCP client and TCP server
- finger auto detect
- 3 leds, all leds are software-programmable
- power supply over ethernet cable
- default IP address switch (default IP address: 192.168.100.10 port 5000)
- DHCP (optional)
1.1 External Dimensions
Length: 80 mm
Width: 60 mm
Height: 15 mm
1.2 Biometric sensor
Sweeping fingerprint sensor from Atmel
image size: 280x440 sensor array
image resolution: 508 dpi
1.3 Interface
10/100 Mbps Ethernet interface
1.4 Power supply
The range of supply voltage: VDC 9-35V
via Power over Ethernet cable (not 100% compatible with IEEE 802.3af)
typical operating current: 110mA, 12V (100Mbps)
1.5 Other
operating temperature: -20 to +85 Celcius
surface discharge: 10 kV aerial discharge
surface resistance: 1.2 million times
1.6 Software
User’s Manual
EFISC SDK - Software Development Kit

EFIS121 User’s Manual Page
4
2. Hardware Installation
2.1 Connectors description
EFIS121 Fingerprint Scanner is powered over the Ethernet cable (Figure 1). Black box
with 2 Ethernet inputs provides DC power to the scanner (black cable on the picture)
and at the same time connects EFIS121 to the network (yellow cable on the picture).
It’s possible to use 2 types of passive PoE adapter.
The range of supply voltage: VDC 9-35V
Typical supply DC voltage is 12V.
PoE connector is for EFIS121
LAN connector is for network

EFIS121 User’s Manual Page
5
2.2 Default IP address switch
The EFIS121scanner has a capability to change the IP address. The winconefis121.exe
utility lets to modify the specific parameters. If the IP address of EFIS121 is forgotten,
it’s possible to set the default IP address by slide switch. The default IP address is
192.168.100.2 port 5000
In order to set default IP address, to turn switch to right position and then you must
apply the power supply.
The IP address of device is on the label. The label is placed on the box cover.

EFIS121 User’s Manual Page
6
To read the configuration of Ethernet device you can by winconefis121.exe utility.
Input the default address (192.168.100.2 port 5000) and press button “Read”. When you
get the device configuration, you can press button “Reboot”. The device will be
rebooted and takes the network configuration from flash memory of device.
Note: You must be sure, that the other network devices haven’t IP address
192.168.100.2 in your network.

EFIS121 User’s Manual Page
7
3. Functionality
The EFIS121 scanner provides to get the fingerprint images using Ethernet interface.
EFISC Scanner control SDK lets have to simple interface to device.
The scanner supports two modes of work
- active mode (scanner works as TCP client)
- passive mode (scanner works as TCP server)
In active mode the scanner waits the finger on the sensor. When the finger is detected,
scanner will try to establish the connection with TCP server. The EFIS121 has TCP
server address in current configuration of device in flash memory. TCP server provides
the connection and takes the fingerprint image for processing.
In passive mode the scanner works as TCP server and waits a connection from TCP
client. If TCP client has the connection from EFIS121 the client application can get the
fingerprint image and control other feature of device by SDK.
WEB access provide us to get fingerprint image using http request .
Configuration for WEB access (use the utility for configuration)
Device mode: WEB access (x) Timeout [30] seconds.
Fingerprint image: Whole image [x]
(Remark: You can set the timeout to 10 or 20. It's time of access to last image of finger.
if you input 0, you can take current fingerprint image only once.)
1. The access to fingerprint image by WEB service
http://192.168.100.168/cgi-bin/getimage.cgi?filename=finger.bmp&tmp=xxxx
where xxx - any number
2. To get the quality of last fingerprint
http://192.168.100.168/cgi-bin/getimage.cgi?quality
3. To get access to homepage
http://192.168.100.168/
or
http://192.168.100.168/index.html
4. Service functions

EFIS121 User’s Manual Page
8
- switch on the green led
http://192.168.100.168/cgi-bin/control.cgi?led=green,on
- switch off the green led
http://192.168.100.168/cgi-bin/control.cgi?led=green,off
- switch on the red led
http://192.168.100.168/cgi-bin/control.cgi?led=red,on
- switch off the red led
http://192.168.100.168/cgi-bin/control.cgi?led=red,off
If your network has DHCP server you can switch on DHCP service in EFIS121
(optional). Note: Better to use the DHCP service in active mode.

EFIS121 User’s Manual Page
9
4. Contact
ABS Applied Biometric Systems GmbH
Im Bauernbusch 27
12355 Berlin
Germany
[e-mail]
tel: [phone]
fax: [phone]