Abtus AVS-311 Operation instructions

* Specifications are subject to changes without notice.
SPECIFICATIONS
ABtUS SINGAPORE PTE LTD www.abtussingapore.com
Mo el: AVS-311
** For etail an up ate RS-232 Comman protocol for programming,
please visit an ownloa from www.abtussingapor .com
Multime ia
Controller Switcher
Programmable Integrate Projector Controller Switcher
INPUT: 3 x PC input (*D-Sub 15pin)
2 x PC-Au io (*3.5mm)
1 x C-Vi eo (*RCA)
1 x Stereo Au io (*RCA)
1 x USB (Type B by the Si e)
1 x Microphone (*3.5mm)
1 x Microphone (*6.3mm)
OUTPUT: 1 x VGA to Projector (*Stan ar 2.54mm Connector)
1 x VGA to Monitor (*D-Sub 15pin by the Si e)
1 x C-Vi eo (*Stan ar 2.54mm connector)
1 x Main Stereo Au io (*Stan ar 2.54mm Connector)
1 x USB (*Stan ar 2.54mm Connector)
1 x Tx (*Stan ar 2.54mm Connector)
VGA BANDWIDTH: 3-in 2-out VGA Distribution Amplifier (900MHz R+G+B)
MAX RESOLUTION: 1280 x 1024
ALL CABLE LENGTH: Up to 28 meter
CONFIGURABLE COM PORT: 1 x RS-232 (8 Data Bit an 1 Stop Bit)
BAUD RATE: 1200 to 115200
PARITY BIT: Non, Even or O
DELAY TIME: Projector ON/OFF elay time (*in sec) 1 to 99
CONTROL BUTTON: Number of user efine Control Button x 8
Available protocol for each Control Button x 1
LED: With LED & Buzzer for confirmation
VIDEO SELECTION: All Vi eo/VGA Input Switching Digital
AUDIO SELECTION: Au io Input Switching Digital
VOLUME: Main Volume Control Analog
MIC GAIN: Microphone Input Gain Control Analog
POWER ADAPTOR: 12V-DC, 500mA
HOUSING: ABS
DIMENSIONS | WEIGHT: (149 x 88 x 48)mm | Weight:350g
ACCESSORIES: AC-DC Power A aptor 12V-DC, 500mA
Typical Applications
Any professional presentation system
requiring multiple AV Inputs of all ifferent
type of Vi eo stan ar an a stan ar
projector controller.
 Schools (Me ia Classroom)
 Churches
 Corporate Applications (Meeting Room)

Connecte to "Au io In"
of the Multi-Me ia
Speaker system.
Main Audio-Output
Audio Lin Input
Connecte from Line
Out of the Projector for
Auto Monitoring.
"Connecte to
"Vi eo-In"
of Multi-Me ia
Projector
Vid o-Output
Connecte to RS-232
com-port of Multi-
Me ia Projector.
RS-232/TX Out
Selection of Comman
set for controlling of
ifferent projectors.
Proj ctor Tabl S tting
Power source
connecte from Multi-
Me ia Speaker.
Main DC Supply Input
Connecte to VGA In
of a LCD/CTR Monitor.
Switching
between PC-2/PC-3
Monitor-Output
USB Type B In
connecte from PC
to IWB or Interactive
Projector
USB Typ B IN
Connecte to VGA-1
In of the Multi Me ia
Projector. Switching
between PC-1/PC-2
an PC-3
Main VGA-Output
Config Port
For configuring
programming of the
RS-232 TX Out
Us r Op ration Guid
* Specifications are subject to changes without notice.
PRODUCT HIGHLIGHTS
PRODUCT DESCRIPTION
The ABtUS AVS-311 Me ia Control Panel is one of the most user frien ly an installer frien ly
Pre-Programmable Controller specifically esigne for a easy an central control of any AV
projection system. It removes the nee for over-complicate an multiple remote control han sets.
INTERNAL PCB LAYOUT AND INTER CONNECTION
TURNING ON AND BASIC OPERATION CONTROL
Use to select Projector Input to
PC Input an its inter VGA
switcher an au io switcher to
PC-1 (Laptop) accor ingly. The LED
will blink once an stay ON
Use to select Projector to PC
Input an its inter VGA switcher
an au io switcher to PC-2
(Desktop) accor ingly. The LED
will blink once an stay ON
4. PC-2 Button
Use to select Projector Input to
PC Input an its inter VGA
switcher PC-3 (Document Camera)
accor ingly. The LED will blink
once an stay ON
5. PC-3 Button
Use to select Projector Input to
AV Input an its inter Au io
switcher to Vi eo-Au io
accor ingly. The LED will blink
once an stay ON
6. AV Input
Use to select Projector to
Wireless/Network Input an its
inter au io switcher to Network
accor ingly. The LED will blink
once an stay ON
7. Wir l ss Button
Use to select Projector to Pic
blank ON/OFF an its inter au io
switcher to mute accor ingly. The
LED will blink once an stay ON
8. Pic Mut Button
VGA Input port for Document
camera connection
11. PC-3 Input
Use to TURN ON projector power,
LED will blink an stay ON after
The Warm Up Time. State that
the projector is now READY!
Switcher will auto set input to its
efault selection i.e. PC-2
2. POWER ON Button
Use to TURN OFF projector power,
LED will blink an stay ON after The
Cool Down Time. State that the
Projector is now READY!
1. POWER OFF Button
Au io Vi eo Input port for DVD or
VRC connection
15. Audio Vid o Input
VGA Input port with PC-Au io for
Desktop connection
13. PC-2 Input
For both 6.3mm an 3.5mm
Microphone Input connection
12. Mic Input
Tuning Up an Down of the main
Volume level
9. Main Volum Control
Tuning Up an Down of the Mic
Gain level
10. Mic Gain Control
3. PC-1 Button
VGA Input port with PC-Au io for
Laptop connection
14. PC-1 Input
Connecte to local
LCD Monitor.
Monitoring input PC2
& PC3 only
16. Monitor Out
1 x USB Type B
for Interactive Boar
17. USB IN
PROGRAMMING SOFTWARE
** For etail an up ate Comman an program software, please visit an ownloa from www.abtussingapor .com
Saving of a project
Program one
Sav Fil
Rea ing the
project program
loa e in the evice
R ad D vid
Setup for Com port
Between evice an
PC efault: 9600, 8, N, 1
Com S tup
About Me ia
Programmer
AVS-311
H lp
Loa ing for a
project program
one to the evice
Whit D vic
Loa ing a excee ing
project program
Load Fil
Projector Hex co e
Entry win ow
Command Cod
Selection of button
to be programme
Program Button
Win ow for input of
Projector mo el
number as reference
Proj ctor Mod l
Setting up the
Projector Com port
parameter
Proj ctor Com Port
D lay Tim
Projector Power
ON, OFF an
Switching
Respon time
·Programmabl proj ctor protocol
·Simpl to us d with on to on function controll d button with LED indication
·Works w ll with any monitors, proj ctors and Int ractiv Whit Board
·Supports 3 VGA input with r solutions from VGA to SXGA
·Easy Installation with standard 2.45mm conn ctor and cabling
·Fully s lf contain d / int grat d Proj ctor Controll r with AV switch r and USB in
·With 1 USB Input Conn ctions (1 x USB Typ B)