Abtus AVS-318D User manual

Multimedia
Controller Switcher
Model: AVS-318D
Revision 19.04.2017
SPECIFICATION
INPUT: 2 × VGA Input (*D-Sub 15pin)
2 × PC-Audio (*3.5mm)
1 × Mic Input (*6.3mm)
2 × HDMI Input (19 pin female with build in buffer)
1 × 12V DC Jack
OUTPUT: 1 × CAT5 TMDS output (To RX)
1 × CAT5 DDC output (To RX)
1 × VGA monitor output
1 × HDMI monitor output
1 × Main Stereo Audio
VGA BANDWIDTH: 900MHz (R+G+B)
MAX RESOLUTION: Full HD 1080p (HDMI)
ALL CABLE LENGTH: Up to 15 meter *subject to grade of cables used
CONTROL BUTTON: Number of user defined “Control Button” :8 (10 commands)
Available protocol for each “Control Button” :1
(or × 2 depending on configurations)
LED With LED indication and buzzer for confirmation
VIDEO SELECTION: All Video/HDMI/VGA/USB Input Switching Digital
AUDIO SELECTION: Audio Input Switching Digital
VOLUME: Main Volume Control Analog
MIC GAIN: Microphone Input Gain Control Analog
POWER ADAPTOR: 12V-DC, 1A
HOUSING: ABS
GROSS DIMENSIONS: 200 × 200 × 80 mm
GROSS WEIGHT: 936 g
** For details and updated Command and Program Software, please visit and download from www.abtussingapore.com
*Specifications are subject to changes without notice.
Typical Applications
Any professional presentation system requiring multiple AV Inputs of all
different type of Video standard and a standard projector controller.
• Schools (Media Classroom)
• Churches
• Corporate Applications (Meeting Room)
4
PRODUCT DESCRIPTION
PRODUCT HIGHLIGHTS
The ABtUS AVS-318D Media Control Panel is one of the most user friendly and installer
friendly unit that is specifically designed for a easy and central control of any AV projection
system. It removes the need for over-complicated and multiple remote control handsets.
With CAT5 outputs and power over cable (POC), the AVS-318D can be done easily and
within minutes.
●“User Programmable” with Window base Application Software
●Simple to used with one to one function controlled button
●CAT5 outputs allows for quicker installations.
●Power over cable (POC).
●Support up to 15m
●Supports USB (HID) , VGA and HDMI
●Works well with any monitors, projectors as well as interactive system
●Scan convert VGA input and output to HDMI

*Specifications are subject to changes without notice.
User Operation Guide
TURNING ON AND BASIC OPERATION CONTROL
PC-2
Switch to VGA 2
Power OFF Button
Press to turn projector power
OFF. LED will blink and stay On
after “cool down time”
PC-1
Switch to VGA 1
HDMI-1
Switch to HDMI 1
Main Audio Output
Connected from “Audio In” of the
Multimedia Speaker System to
2RCA pigtail cable
PICTURE BLANK
Blank / Unblank projector screen
HDMI-2
Switch to HDMI 2
WIRELESS
Set projector to wireless mode
Power ON Button
Press to turn projector power
ON. LED will blink and stay On
after “warm up time”
32
RECEIVER
RS-232 OUT-1
To control projector 1
RS-232 OUT-2
To control projector 2
HDMI
HDMI to projector / display
DDC
CAT-5 connection from
AVS-318C (DDC port)
TMDS
CAT-5 connection from
AVS-318C (TMDS port)
* Warning: Crossing of CAT-5/6 cables could cause
permenant damages to the unit.
Please take extra care to ensure the CAT-5 cable connects
TMDS port on AVS-318C to TMDS port on receiver and
DDC port on AVS-318C to DDC port on receiver.
PROGRAMMING INSTRUCTIONS SYSTEM DIAGRAM
DIP Switch
Switch for preloaded programing
modes
*See table for more information
Config Port
For configuring
programming of the
“RS-232 TX Out”
Monitor Out
CAT-5 Out
HDMI-2 Mic In 6.3mm HDMI-1
VGA/Audio / USB-B1
VGA/Audio / USB-B2
HDMI RS-232
Receiver
CONFIGURATION COM PORT:
1 × RS-232
(9600, 8 data bit, Non Parity and 1 stop bit)
COM PORT:
1 × RS-232 (8 Data Bit and 1 Stop Bit)
Baud Rate(9600 to 115200)
Parity Bit (Non, Even or Odd)
DELAY TIME:
Projector “ON/OFF” delay time (*in sec) 1 to 99
AVS-318D Dip switches setting:
Dip
Switch 1
Panasonic PT-VW530 On Off Off Off 9600/n/1
Panasonic PT-LB330 On Off Off On 19200/n/1
Sony VPL-EX245 On Off On Off 38400/e/1
Hitachi On Off On On 19200/n/1
NEC M300X On On Off Off 38400/n/1
CASIO XJ-M150 On On On Off 19200/n/1
EPSON EP-470 On On On On 9600/n/1
Vivitek D837 On On Off On 9600/n/1
Promethean EST-P1
ISP (default Off On/Off On/Off On/Off 115200/n/1
BENQ)
Dip
Switch 2
Dip
Switch 3
Dip
Switch 4
Baud
Rate
Projector Models
for reference