AC Infinity AIRTITAN SERIES User manual

USER MANUALUSER MANUAL
AIRTITAN SERIES
CRAWLSPACE AND BASEMENT VENTILATION FANS

3
WELCOME
Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service.
If you have any questions or suggestions, please don’t hesitate to contact us. Visit www.acinfinity.com
and click contact for our contact information.
EMAIL
[e-mail]
WEB
www.acinfinity.com
LOCATION
Los Angeles, CA

4
PRODUCT
AIRTITAN T3
AIRTITAN T7
AIRTITAN T8
AIRTITAN T8-N
MODEL
AC-ATT3
AC-ATT7
AC-ATT8
AC-ATT8-N
UPC-A
00819137020467
00819137020474
00819137020481
00819137020498
MANUAL CODE AT1902X2

5
MANUAL INDEX
Manual Index .................................................................................
Key Features .................................................................................
Product Contents ...........................................................................
Mounting ........................................................................................
Powering ........................................................................................
Programming .................................................................................
Other AC Infinity Products .............................................................
Warranty ........................................................................................
Page 5
Page 6
Page 7
Page 8
Page 10
Page 12
Page 20
Page 21

6
KEY FEATURES
INGRESS PROTECTION
Fans are sealed to be
dust proof and high water
resistance. Can receive water
splashes and high pressure
water jets.
HEAVY DUTY BUILD
The fan system features a
galvanized steel or aluminum
mounting frame with fan
guards. Fans are enclosed in
steel or plastic.
SMART CONTROLLER
Digital controller can be set
to trigger fans at high and low
temperature and humidity.
Features alarms and fan
speed control.
THERMAL PROBE
The corded precision sensor
probe constructed of stainless
steel ensures an accurate
temperature and humidity
reading.
QUIET PWM MOTOR
PWM-controlled motor
features precise speed
control, reduced rotor noise,
and runs on energy efficient
DC voltage.
DUAL BALL BEARINGS
Each fan contains long-life
ball bearings rated at 67,000
hours. This bearing system
enables fans to be mounted in
any direction.

7
PRODUCT CONTENTS
AIRTITAN T8
AIRTITAN T8-N
AIRTITAN T3
AIRTITAN T7
AC-ATT8
AC-ATT8-N
AC-ATT3
AC-ATT7
THERMAL
PROBE (x1)
THERMAL
PROBE (x1)
POWER
ADAPTER (x1)
POWER
ADAPTER (x1)
FAN
SYSTEM (x1)
FAN
SYSTEM (x1)
UNIVERSAL
CONTROLLER (x1)
FAN
SYSTEM (x1)
WALL
ANCHORS (x4)
THERMAL
PROBE (x1)
POWER
ADAPTER (x1)
MACHINE
SCREWS (x4)
MACHINE
SCREWS (x4)
MACHINE
SCREWS (x4)
UNIVERSAL
CONTROLLER (x1)

8
MOUNTING
STEP 1
Remove any existing grilles, vents, or covers
on ventilation opening where you wish to install
the fan unit.
STEP 2
Position the fan unit over the ventilation
opening. Depending on the model, the unit may
be facing towards or away from the wall. Please
be sure to check the airflow direction prior to
installation.

9
MOUNTING
STEP 3 (Wall and Surface Mounting)
If installing the unit onto a cabinet, wall, wood
header, rim joist, or mesh on an existing crawl
space vent, please use the unit or plastic
template to determine the mounting location.
Secure the mounting frame onto the surface
with the included wood screws. If using a
machine screw with nuts, you may need to drill
a hole. Note that models T8 and T8-N do not
include a plastic template.
STEP 3 (Foundation Block Mounting)
To install the unit onto a foundation brick or
block, mark the mounting hole locations using
the four corners of the metal face plate. Then
drill 5/16" holes with a drill bit. Install wall
anchors into openings and secure the unit into
the wall with four screws. Note that the models
T3 and T7 are designed for cabinet and wall
mounting, and do not include wall anchors and
larger type screws.
AIRTITAN T8, T8N Illustration shown above.
AIRTITAN T8, T8N Illustration shown above.

10
POWERING
STEP 1
To set up temperature monitoring, plug the
male connector of the thermal probe into the
designated probe port located at the bottom
side of the fan unit.
STEP 2
To power the unit plug in the power, plug the
male connector of the corded power adapter
into the designated power port located at
the bottom side of the fan unit. Then plug the
adapter head into an outlet.
AIRTITAN T8 T8-N