AC Infinity CLOUDRAY Series User manual

USER MANUALUSER MANUAL
CLOUDRAY
CIRCULATION FAN SYSTEM

3
WELCOME
Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service.
If you have any questions or suggestions, please don’t hesitate to contact us. Visit www.acinfinity.com
and click contact for our contact information.
EMAIL
[e-mail]
WEB
www.acinfinity.com
LOCATION
Los Angeles, CA

4
MANUAL CODE CC2209X1
PRODUCT
CLOUDRAY A6
CLOUDRAY S6
CLOUDRAY T6
CLOUDRAY A9
CLOUDRAY S9
CLOUDRAY T9
MODEL
AC-CCA6
AC-CCS6
AC-CCT6
AC-CCA9
AC-CCS9
AC-CCT9
UPC-A
819137022416
819137022423
819137022447
819137022454
819137022461
819137022478

5
MANUAL INDEX
Manual Index .................................................................................
Product Warning ............................................................................
Recommended Usage ...................................................................
Key Features .................................................................................
Product Contents ...........................................................................
Installation .....................................................................................
Powering and Setup ......................................................................
Cleaning ........................................................................................
UISTM Platform ...............................................................................
Connecting to Controllers ..............................................................
Programming .................................................................................
Frequently Asked Questions ..........................................................
Other AC Infinity Products .............................................................
Warranty ........................................................................................
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 12
Page 13
Page 15
Page 16
Page 17
Page 19
Page 20
Page 21

6
Ensure your power source conforms to the electrical requirements of this product.
Check your local code restrictions for additional safety measures that may be needed for a
proper code compliant installation.
Read all instructions before installing and using this product.
If you are unfamiliar or have doubts about performing this product’s installation, seek the
services of a qualified, trained, and licensed professional. Inappropriate installation will void
this product’s warranty.
Do not attempt to hardwire this product. Performing any retrofitting actions may result in
personal injury and/or electrical damage, and will void this product's warranty.
This product must not be used in potentially hazardous locations such as flammable,
explosive, chemical-laden or wet atmospheres.
Do not cover power cords with rugs or other fabric materials.
This product has rotating parts. Safety precautions should be exercised during the installation,
operation, and maintenance of this product.
Do not insert or allow fingers or foreign objects to enter through the fan grille as it may cause
electric shock, fire, or damage to this product. Do not block or tamper with this product in any
manner while it is in operation.
Do not depend on the on/off programming as the sole means of shutting power from this
product. Unplug the power cord before installing, servicing, or moving this product.
Do not operate this product while its cord is damaged, or if it malfunctions, has been dropped,
or is damaged in any manner.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
PRODUCT WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:

7
RECOMMENDED USAGE
REDUCING CORD TENSION
Please make sure to provide enough slack for
the power cord and the extension cord. The
fan should be able to oscillate freely without
tugging on its cords.
MAXIMIZING LIFESPAN
This fan utilizes the latest in step motor
technology that allows it to operate 24 hours
a day.
However, to maximize its lifespan, we do not
recommend having it oscillate nonstop for more
than 18 hours a day.
This will preserve the motor by passively
keeping it cool to prevent it from wearing down.
18 hr.
ON
6 hr.
OFF

8
KEY FEATURES
COMPACT BASE
Shallower motor base
allows for closer mounting
to poles to maximize
amount of grow space.
EC MOTOR
Next generation motor runs
quieter, is more energy
efficient, and has a longer
lifespan than AC motors.
IP44 PROTECTION
The clip fan is sealed to
Ingress Protection 44
standards, rated with high
resistance to liquids and dust.
*S-Series only
PWM CONTROL
Digitally controlled to
enable a range of 10 fan
speeds and 10 oscillation
angles* in any grow setting.
UIS™ COMPATIBLE
Connects with UIS
controllers for temperature,
humidity, timer, cycle, and
schedule programming.
DUAL BALL BEARINGS
The motor contains ball bearings
with an estimated 67,000 hour
lifespan. Enables the fan to be
mounted in any orientation.

9
PRODUCT CONTENTS
CABLE
MOUNT
(x1)
CABLE
TIE
(x4)
CIRCULATION
FAN
(x1)
ADAPTER
DONGLE
(x1)
EXTENSION
CORD
(x1)
GRIP
CLIP
(x1)

10
INSTALLATION
STEP 1
Twist to remove the bigger knob piece from the
grip clip.
Pull the smaller button piece from the vice grip.
STEP 2
Slide the grip clip into the swivel.
You may need to pull its clamps apart for it to fit
over the swivel. This tightness ensures your fan
will not tilt downwards on its own.

11
INSTALLATION
STEP 3
Replace the knob and button on either side of
the mounting point as desired.
STEP 4
Clamp your clip fan onto a pole or post.

12
POWERING AND SETUP
STEP 1
Plug your clip fan's power cord into an AC
power outlet to power it.
STEP 2
You may cable manage the cords using the
included cable ties or cable mounting set.
Adhere the tie mount onto a clean surface.
Loop the wire tie into the mount and around
the cables.

13
STEP 1
Unplug your clip fan.
STEP 2
Remove the front grille by twisting the grille
counter-clockwise and pulling it off.
Removing the front grille to clean the fan
blades will not void your warranty.
CLEANING
A
B

14
STEP 4
Realign the grille over your clip fan and twist
clockwise to lock it in place.
STEP 3
Wipe off any dust and debris from the grille
and fan blades using a damp cloth. Set aside
to dry as needed.
CLEANING
A
B

15
UISTM PLATFORM
The UISTM platform enables you to connect a single central controller with several grow devices
simultaneously. By creating this fully integrated system, you can power and program all your
devices together or separately for optimized grow tent management.
Your grow system can be regulated using your controller hub or remotely on the AC Infinity app
(paired with compatible controllers), where you will have access to automation programming and
climate data.
You can also connect your favorite grow light and outlet device to integrate them into the UIS
platform using our RJ11/12 adapter and control plug module.
Central controllers, mounting plates, and grow devices will be sold separately
and may still be in development at the time of your purchase of this product.

16
MOLEX CONNECTORS
To connect to previous gen controllers such T-Series controller (UNC529) or CONTROLLER 67
(sold separately), use the included adapter dongle to convert the controller’s molex connector to a
UIS connector. Then use the included UIS extension cord to connect that to the CLOUDRAY fan’s
UIS port.
CONNECTING TO CONTROLLERS
Shown: CONTROLLER 67
The CLOUDRAY circulation fan can connect with
select smart controllers as part of an integrated
system using the included UIS cable. Please see
below for limitations.
UISTM CONNECTORS
To connect to the latest gen controllers such
as CONTROLLER 69 PRO (sold separately),
use the included UIS extension cord to directly
connect the CLOUDRAY fan’s UIS port to the
controller’s UIS port.

17
FAN SPEED ADJUSTING
Your clip fan features a single button that
cycles through the fan speed from 0-10,
indicated by the ring of LED lights.
Press the speed button to increase the fan
speed level by one.
Pressing the button past speed 10 will cycle
the fan speed back to 0.
POWERING ON/OFF
Hold the speed button for 4 seconds to turn the
fan OFF. Pressing it again from OFF will turn
the fan ON at its last speed setting.
PROGRAMMING
Fan Speed
Indicator
A-SERIES

18
OSCILLATION
In addition to the standard features, S-Series
models can oscillate to provide airflow at a
wide angle. The oscillation function is manually
activated using the oscillation button and cannot
be controlled using external UIS programming.
If set to off, your clip fan will not oscillate
regardless of any external programs.
If set to on, oscillation will automatically start if
the external program activates your clip fan to
turn ON. Oscillation will then automatically stop
if the external program deactivates your clip fan
to turn OFF.
PROGRAMMING
S-SERIES
ADJUSTING OSCILLATION RANGE
The oscillation button cycles through the
oscillation levels from 0-10 with a maximum 90°
angle range, indicated by the ring of LED lights.
This will ensure your clip fan will not come in
contact with your grow tent while enabling you
to adjust the focus of the circulation.
Press the oscillation button to increase how
wide the fan will oscillate by one level.
Pressing the button past level 10 will cycle the
oscillation back to 0.
Oscillation
Levels
Indicator

19
CLOUDRAY FAQ
Q: Can I mount this clip fan upside down?
A: Yes. The CLOUDRAY can be mounted rightside up or upside down.
Q: Will I be able to hardwire this clip fan to my own controller or thermostat?
A: We do not recommend hardwiring or splicing our fan's power wires. Such modifications may
compromise electrical safety and will void this product's warranty.
Q: Do I need to use a power converter if I'm outside the US?
A: This product's voltage range is 100-240V AC. You may need a simple travel adapter to plug it
into a foreign socket, or a power converter if your country uses a different voltage.
Q: What is the CFM of my clip fan?
A: Please refer to your CLOUDRAY model's product listing for its CFM specification.
Q: Will the clamp be able to hold onto my grow tent?
A: The heavy-duty clamp is capable of gripping onto the poles of any thickness in any grow tent.
Q: Will I be able to connect additional units to this clip fan?
A: The CLOUDRAY does not support daisy-chaining or interconnectivity between additional clip
fans. However, multiple fans can be connected to a UIS™ controller to receive smart programming.
Q: How long can I keep this clip fan running?
A: The CLOUDRAY features the latest innovations in step motor technology, allowing it to run
continuously for 24 hours a day.

20
AC INFINITY PRODUCTS
Discover the latest innovations in environmental controls at acinfinity.com
Carbon Filters
The duct carbon filter is designed to eliminate odors and chemicals
for grow tents and hydroponic spaces. It utilizes premium grade
Australian charcoal that features greater absorption power and a
longer lifespan. Enables maximum airflow pass through as part of
an intake or an exhaust system.
Grow Lights
An indoor LED grow lamp designed to simulate outdoor daytime
lighting to improve and accelerate your plant’s photosynthesis.
Using the latest Samsung LM301H diodes, this LED grow system
efficiently produces full-spectrum lighting usable during all stages of
the grow cycle.
Inline Duct Fans
The CLOUDLINE series is a line of duct fans designed to quietly
ventilate AV rooms and closets, as well as various DIY air circulation
and exhaust projects. Features a thermal controller with intelligent
programming that will automatically adjust duct fan speeds in
response to changing temperatures.