AC Infinity CLOUDLINE S4 User manual

USER MANUALUSER MANUAL
CLOUDLINE
MIXED FLOW INLINE FAN SYSTEMS

3
WELCOME
Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service.
If you have any questions or suggestions, please don’t hesitate to contact us. Visit www.acinfinity.com
and click contact for our contact information.
EMAIL
[e-mail]
WEB
www.acinfinity.com
LOCATION
Los Angeles, CA

4
PRODUCT
CLOUDLINE S4
CLOUDLINE S6
CLOUDLINE S8
CLOUDLINE S10
CLOUDLINE S12
CLOUDLINE T4
CLOUDLINE T6
CLOUDLINE T8
CLOUDLINE T10
CLOUDLINE T12
MODEL
AI-CLS4
AI-CLS6
AI-CLS8
AI-CLS10
AI-CLS12
AI-CLT4
AI-CLT6
AI-CLT8
AI-CLT10
AI-CLT12
UPC-A
819137020290
819137020306
819137020849
819137020856
819137021006
854759004785
854759004792
819137020276
819137020283
819137021013
EC models CANNOT be daisy chained with DC models. See page 32-34 for
more information on daisy-chaining fans and safety precautions.
MANUAL CODE CL2112X2

5
MANUAL INDEX
Manual Index .................................................................................
Product Warning ............................................................................
Interference from MH and HPS Lights ...........................................
Key Features .................................................................................
Product Contents ...........................................................................
Installation: Mounting .....................................................................
Installation: Hanging ......................................................................
Installation: Motor Cap Orientation ................................................
Installation: Configuration Setup ....................................................
Powering and Setup ......................................................................
Controller Mounting .......................................................................
Universal Infinity System ...............................................................
UIS Compatibility ...........................................................................
Compatibility ..................................................................................
Adding More Fans .........................................................................
Adding More Devices ....................................................................
Cleaning ........................................................................................
Programming .................................................................................
Maximum and Minimum Settings ..................................................
Other Settings ...............................................................................
Download the App .........................................................................
Add a Device .................................................................................
FAQ ...............................................................................................
Other AC Infinity Products .............................................................
Warranty ........................................................................................
Page 5
Page 6
Page 7
Page 8
Page 9
Page 11
Page 16
Page 20
Page 21
Page 22
Page 25
Page 30
Page 31
Page 32
Page 33
Page 34
Page 35
Page 37
Page 53
Page 54
Page 55
Page 56
Page 59
Page 63
Page 64

6
Ensure your power source conforms to the electrical requirements of this product.
Check your local code restrictions for additional safety measures that may be needed for a
proper code compliant installation.
Read all instructions before installing and using this product.
If you are unfamiliar or have doubts about performing this product’s installation, seek the
services of a qualified, trained, and licensed professional. Inappropriate installation will void
this product’s warranty.
This product must not be used in potentially hazardous locations such as flammable,
explosive, chemical-laden or wet atmospheres.
Ducted products must always be vented to outdoor areas.
Do not cover power cords with rugs or other fabric materials.
This product has rotating parts. Safety precautions should be exercised during the installation,
operation, and maintenance of this product.
Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust openings as
it may cause electric shock, fire, or damage to this product. Do not block or tamper with this
product in any manner while it is in operation.
Do not depend on the on/off programming as the sole means of shutting power from this
product. Unplug the power cord before installing, servicing, or moving this product.
Do not operate this product while its cord is damaged, or if it malfunctions, has been dropped,
or is damaged in any manner.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
PRODUCT WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:

7
Certain grow light models with HID* ballasts that do not use electromagnetic shielding will
create an area of radio frequency interference (RFI). This can distort nearby frequency-sensitive
components like internet lines and climate sensors. RFI can be emitted from the ballast’s cords or
the ballast itself.
Follow these steps to ensure proper functionality and to prevent radio frequency interference from
affecting your sensor probe:
TIP 1
Keep the probe cord far away
from your ballast's cords to ensure
the controller properly detects
climate conditions.
You may also wrap the probe
cord and create a cone around
the sensor head with aluminum
foil tape.
TIP 2
Do NOT plug your grow light and
inline fan into the same duplex
outlet. Plug your grow light and
inline fan into separate power
strips and electrical sockets.
*MH, HPS, CMH, or CHPS
INTERFERENCE from MH and HPS LIGHTS

8
KEY FEATURES
CONTROLLER 69
Features automation controls
that activate the fan according
to temperature, humidity,
timer, and schedules.
QUIET PWM MOTOR
PWM-controlled motor features
precise speed control, reduced
rotor noise, and energy-efficient
EC voltage.
IP-44 PROTECTION
The inline duct fan is sealed
to Ingress Protection 44
standards, rated with high
resistance to liquids and dust.
STATOR BLADE FANS
Hydro-mechanical stator
blades enable efficient
airflow delivery in high static
pressure environments.
SPEED CONTROLLER
Single button controller with
circular readout display that
enables fan speed control in
ten speeds.
DUAL BALL BEARINGS
The motor contains ball bearings
with an estimated 67,000 hour
lifespan. Enables the fan to be
mounted in any direction.

9
PRODUCT CONTENTS
CLOUDLINE S-Series
DUCT
CLAMP
(x2)
DUCT FAN
SYSTEM
(x1)
WALL
ANCHOR
(x4)
DUCT FAN
SCREW SET
(x4)
CLOUDLINE T-Series
FAN UNIT (Included in both S-Series and T-Series)
SPEED
CONTROLLER
(x1)
SMART
CONTROLLER 69
(x1)
WOOD SCREWS
(WALL HANG)
(x2)
HANGING
STRAPS
(x2)
WIRE
MOUNT
(x6)
PROBE
MOUNT
(x1)
VELCRO
TIES
(x4)
SENSOR
PROBE
(x1)
UIS M - 4PIN F
ADAPTER
(x2)
WOOD SCREWS
(WALL MOUNT)
(x1)
UIS F - 4PIN M
ADAPTER
(x1)
CONTROLLER
PLATE BOLTS
(x2)
CONTROLLER
PLATE BOLTS
(x2)

10
PRODUCT CONTENTS

11
INSTALLATION
STEP 2
Remove the motor box from the flange bracket.
Remove the wind circle between the motor box
and the intake flange.
STEP 1
Unscrew and loosen the metal rings using a
Phillips screwdriver and pliers.
MOUNTING

12
INSTALLATION
STEP 3
Use the flange bracket to set your desired fan
position. Mark the four mounting holes.
STEP 4
Drill four holes into the marked locations. Make
sure your mounting area is structurally sound
and free from obstruction.
MOUNTING

13
STEP 5
If you are mounting onto anything other than a
wood support or stud, insert the included four
wall anchors into the drilled mounting holes.
You may need to use a hammer to secure them
through the holes.
INSTALLATION
STEP 6
Align the flange bracket’s holes with the wall
anchors. Screw in four wood screws with a
screwdriver or drill to secure the flange bracket.
Make sure its airflow arrow is pointing in your
desired direction.
MOUNTING

14
INSTALLATION
STEP 8
Slide the motor box back into the flange bracket,
making sure its airflow arrow is pointing in the
same direction as the flange bracket’s arrow.
Tighten the metal clamps using a Phillips
screwdriver and pliers to secure the motor box.
STEP 7
Place the wind circle back into the intake flange
and reposition the metal clamps over the
flanges if applicable.
MOUNTING

15
STEP 9
Place the metal rings back onto the
flanges and tighten the screws back to
secure the fan.
STEP 10
If installing ducting, use the included
duct clamps to secure it to either end
of the duct fan, making sure there is a
tight seal.
Tighten the duct clamps using a
flathead screwdriver.
INSTALLATION
MOUNTING

16
INSTALLATION
STEP 1
Loop the strap around the bracket and a pole.
HANGING - STRAPS
STEP 2
Slip the strap through the inner ladder lock slot
from the bottom.

17
INSTALLATION
STEP 4
Tuck the loose end through the center gap of
the ladder lock to secure the loop.
STEP 3
Route the strap into the outer ladder lock slot
from the top. Adjust the length of the completed
loop as needed.
HANGING - STRAPS

18
INSTALLATION
STEP 5(a) - Hanging Downward
Let the fan hang by the pole once the straps
are secure.
Make sure the fan's airflow arrow is pointing
towards your desired direction.
HANGING - STRAPS
STEP 5(b) - Hanging Upward
To hang the fan right-side up, loop and tighten the
straps, as shown in steps 1-4, around the pole.
Hang the fan by the duct flanges to secure it.

19
INSTALLATION
STEP 11(a) - Hanging Upward
If installing with rope hangers (sold separately),
loop the ropes around the flanges and tighten
the rope to secure the fan.
HANGING - ROPE CLIPS
STEP 11(b) - Hanging Downward
Loop the two rope hangers around a pole and
the fan's bracket.
Clip the carabiners onto each other. Shorten
the loops as needed.
Make sure the fan's airflow arrow is pointing
towards your desired direction.

20
INSTALLATION
STEP 2
Rotate the motor cap to your desired
orientation. Reapply the screws.
STEP 1
Unscrew the motor cap using a screwdriver.
MOTOR CAP
Rotating the motor cap will not void your warranty.