AC Infinity CLOUDLINE User manual

USER MANUALUSER MANUAL
CLOUDLINE
MIXED FLOW INLINE FAN SYSTEMS

3
WELCOME
Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service.
If you have any questions or suggestions, please don’t hesitate to contact us. Visit www.acinfinity.com
and click contact for our contact information.
EMAIL
[e-mail]
WEB
www.acinfinity.com
LOCATION
Los Angeles, CA

4
PRODUCT
CLOUDLINE S4
CLOUDLINE S6
CLOUDLINE S8
CLOUDLINE S10
CLOUDLINE S12
CLOUDLINE T4
CLOUDLINE T6
CLOUDLINE T8
CLOUDLINE T10
CLOUDLINE T12
MODEL
AI-CLS4
AI-CLS6
AI-CLS8
AI-CLS10
AI-CLS12
AI-CLT4
AI-CLT6
AI-CLT8
AI-CLT10
AI-CLT12
UPC-A
819137020290
819137020306
819137020849
819137020856
819137021006
854759004785
854759004792
819137020276
819137020283
819137021013
MANUAL CODE CL2109X2
EC models CANNOT be daisy chained with DC models. See page 19 & 20 for
more information on daisy-chaining fans and safety precautions.

5
MANUAL INDEX
Manual Index .................................................................................
Key Features .................................................................................
Product Contents ...........................................................................
Installation (Mounting) ...................................................................
Installation (Hanging) .....................................................................
Installation (Motor Cap Orientation) ...............................................
Installation (Configuration Setup) ..................................................
Powering and Setup ......................................................................
Adding More Fans .........................................................................
Cleaning ........................................................................................
Programming .................................................................................
Other Settings ................................................................................
Download the App .........................................................................
Add a Device .................................................................................
App Programming...........................................................................
App Settings...................................................................................
FAQ ................................................................................................
Other AC Infinity Products .............................................................
Warranty ........................................................................................
Page 5
Page 6
Page 7
Page 9
Page 14
Page 18
Page 19
Page 20
Page 23
Page 24
Page 26
Page 40
Page 41
Page 42
Page 44
Page 54
Page 55
Page 57
Page 58

6
KEY FEATURES
SMART CONTROLLER
Features automation controls
that activate the fan according
to temperature, humidity,
timer, and schedules.
QUIET PWM MOTOR
PWM-controlled motor features
precise speed control, reduced
rotor noise, and energy-efficient
EC voltage.
IP-44 PROTECTION
The inline duct fan is sealed
to Ingress Protection 44
standards, rated with high
resistance to liquids and dust.
STATOR BLADE FANS
Hydro-mechanical stator
blades enable efficient airflow
delivery in high static pressure
environments.
SPEED CONTROLLER
Single button controller with
circular readout display that
enables fan speed control in
eight speeds.
DUAL BALL BEARINGS
The motor contains ball bearings
with an estimated 67,000 hour
lifespan. Enables the fan to be
mounted in any direction.

7
PRODUCT CONTENTS
CLOUDLINE S-Series
DUCT
CLAMP
(x2)
DUCT FAN
SYSTEM
(x1)
WALL
ANCHOR
(x4)
DUCT FAN
SCREW SET
(x4)
CLOUDLINE T-Series
FAN UNIT (Included in both S-Series and T-Series)
SPEED
CONTROLLER
(x1)
MACHINE SCREWS
(WALL MOUNT)
(x2)
WOOD SCREWS
(WALL MOUNT)
(x2)
SENSOR
PROBE
(x1)
SMART
CONTROLLER
(x1)
WOOD SCREWS
(WALL HANG)
(x2)
WOOD SCREWS
(WALL MOUNT)
(x2)
MACHINE SCREWS
(WALL MOUNT)
(x2)
HANGING
STRAPS
(x2)
WIRE
MOUNT
(x6)
PROBE
MOUNT
(x1)
VELCRO
TIES
(x4)

8
PRODUCT CONTENTS

9
INSTALLATION
STEP 2
Remove the motor box from the flange bracket.
Remove the wind circle between the motor box
and the intake flange.
STEP 1
Unscrew and loosen the metal rings using a
Phillips screwdriver and pliers.
MOUNTING

10
INSTALLATION
STEP 3
Use the flange bracket to set your desired fan
position. Mark the four mounting holes.
STEP 4
Drill four holes into the marked locations. Make
sure your mounting area is structurally sound
and free from obstruction.
MOUNTING

11
STEP 5
If you are mounting onto anything other than a
wood support or stud, insert the included four
wall anchors into the drilled mounting holes.
You may need to use a hammer to secure them
through the holes.
INSTALLATION
STEP 6
Align the flange bracket’s holes with the wall
anchors. Screw in four wood screws with a
screwdriver or drill to secure the flange bracket.
Make sure its airflow arrow is pointing in your
desired direction.
MOUNTING

12
INSTALLATION
STEP 8
Slide the motor box back into the flange
bracket, making sure its airflow arrow is pointing
in the same direction as the flange bracket’s
arrow.
Tighten the metal clamps using a Phillips
screwdriver and pliers to secure the motor box.
STEP 7
Place the wind circle back into the intake flange
and reposition the metal clamps over the
flanges if applicable.
MOUNTING

13
STEP 9
Place the metal rings back onto the flanges and
tighten the screws back to secure the fan.
STEP 10
If installing ducting, use the included duct
clamps to secure it to either end of the duct fan,
making sure there is a tight seal.
Tighten the duct clamps using a flathead
screwdriver.
INSTALLATION
MOUNTING

14
INSTALLATION
STEP 11(a) - Hanging Upward
If installing with rope hangers (sold separately),
loop the ropes around the flanges and tighten
the rope to secure the fan.
HANGING - ROPE CLIPS
STEP 11(b) - Hanging Downward
Loop the two rope hangers around a pole and
the fan's bracket.
Clip the carabiners onto each other. Shorten
the loops as needed.
Make sure the fan's airflow arrow is pointing
towards your desired direction.

15
INSTALLATION
STEP 1
Loop the strap around the bracket and a pole.
HANGING - STRAPS
STEP 2
Slip the strap through the inner ladder lock slot
from the bottom.

16
INSTALLATION
STEP 4
Tuck the loose end through the center gap of
the ladder lock to secure the loop.
STEP 3
Route the strap into the outer ladder lock slot
from the top. Adjust the length of the completed
loop as needed.
HANGING - STRAPS

17
INSTALLATION
STEP 5(a) - Hanging Downward
Let the fan hang by the pole once the straps
are secure.
Make sure the fan's airflow arrow is pointing
towards your desired direction.
HANGING - STRAPS
STEP 5(b) - Hanging Upward
To hang the fan right-side up, loop and tighten
the straps, as shown in steps 1-4, around the
pole.
Hang the fan by the duct flanges to secure it.

18
INSTALLATION
STEP 2
Rotate the motor cap to your desired
orientation. Reapply the screws.
STEP 1
Unscrew the motor cap using a screwdriver.
MOTOR CAP
Rotating the motor cap will not void your warranty.

19
Intake and Exhaust
This fan can be used as either an intake fan or an exhaust fan in grow rooms and larger grow tents.
To achieve optimal whole space ventilation, the intake fan or opening - if not using a fan - must be
situated at a bottom corner of your grow space. The exhaust fan must be hung (shown below) or
mounted at the highest opposite corner possible.
Make sure the intake fan’s airflow arrow is pointing towards your grow space and the exhaust fan’s
arrow pointing away from your grow space.
INSTALLATION
CONFIGURATION SET-UP

20
POWERING AND SETUP
STEP 2
Plug the fan's power cord into a wall outlet. The
controller will receive power from the fan to
operate. (EC Motor fans only)
STEP 1
Plug the duct fan’s 4-pin molex connector into
the speed controller’s port at the top.
S-SERIES