AC Infinity AIRTITAN SERIES User manual

USER MANUALUSER MANUAL
AIRTITAN SERIES
CRAWLSPACE AND BASEMENT VENTILATION FANS

3
WELCOME
Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service.
If you have any questions or suggestions, please don’t hesitate to contact us. Visit www.acinfinity.com
and click contact for our contact information.
EMAIL
[e-mail]
WEB
www.acinfinity.com
LOCATION
Los Angeles, CA

4
PRODUCT
AIRTITAN S3
AIRTITAN S7
AIRTITAN T3
AIRTITAN T7
AIRTITAN T8
AIRTITAN T8-N
MODEL
AC-ATS3
AC-ATS7
AC-ATT3
AC-ATT7
AC-ATT8
AC-ATT8-N
UPC-A
819137023727
819137023734
819137020467
819137020474
819137020481
819137020498
MANUAL CODE AT2208X3
EC models CANNOT be daisy chained with DC models. See pages 24-25 for
more information on daisy-chaining fans and safety precautions.

5
MANUAL INDEX
Manual Index .................................................................................
Product Warning ............................................................................
Key Features .................................................................................
Product Contents ...........................................................................
Changing Fan Direction .................................................................
Fan Mounting .................................................................................
Powering and Setup ......................................................................
Controller Mounting .......................................................................
UISTM Platform ...............................................................................
UISTM Compatibility ........................................................................
Compatibility ..................................................................................
Adding More Devices ....................................................................
Programming .................................................................................
Other Settings ...............................................................................
Download the App .........................................................................
Add a Device .................................................................................
FAQ ...............................................................................................
Other AC Infinity Products .............................................................
Warranty ........................................................................................
Page 5
Page 6
Page 7
Page 8
Page 9
Page 11
Page 13
Page 17
Page 22
Page 23
Page 24
Page 25
Page 26
Page 45
Page 46
Page 47
Page 50
Page 55
Page 56

6
Ensure your power source conforms to the electrical requirements of this product.
Check your local code restrictions for additional safety measures that may be needed for a proper
code compliant installation.
Read all instructions before installing and using this product.
If you are unfamiliar or have doubts about performing this product’s installation, seek the services of a
qualified, trained, and licensed professional. Inappropriate installation will void this product’s warranty.
Do not attempt to hardwire this product. Performing any retrofitting actions may result in personal
injury and/or electrical damage, and will void this product's warranty.
This product must not be used in potentially hazardous locations such as flammable, explosive,
chemical-laden, or wet atmospheres.
Ducted products must always be vented to outdoor areas.
Do not cover power cords with rugs or other fabric materials.
This product has rotating parts. Safety precautions should be exercised during the installation,
operation, and maintenance of this product.
Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust openings as it may
cause electric shock, fire, or damage to this product. Do not block or tamper with this product in any
manner while it is in operation.
Do not depend on the on/off programming as the sole means of shutting power from this product.
Unplug the power cord before installing, servicing, or moving this product.
Do not operate this product while its cord is damaged, or if it malfunctions, has been dropped, or is
damaged in any manner.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
PRODUCT WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:

7
KEY FEATURES
HEAVY DUTY BUILD
Fans are specially sealed for high
resistance to dust particles and
liquids, including water splashes
and high-pressure water jets.
SMART CONTROLLER
Features automation controls
that activate the fan according
to temperature, humidity,
timer, and schedules.
SPEED CONTROLLER
Single button controller with
circular readout display that
enables fan speed control
in ten speeds.
THERMAL PROBE
The 12-foot corded sensor probe
is constructed of stainless steel
and ensures precise temperature
and humidity readings.
QUIET OPERATION
PWM-controlled motor provides
precise speed control, reduced
rotor noise, and runs on energy
efficient EC motor.
DUAL BALL BEARINGS
Each fan contains long-life
ball bearings rated at 67,000
hours, enabling the fan to be
mounted in any direction.

8
PRODUCT CONTENTS
AIRTITAN T8 and AIRTITAN T8-N
AIRTITAN S3 and S7
AIRTITAN T3 and T7
FAN
SYSTEM
(x1)
SPEED
CONTROLLER
(x1)
SENSOR
PROBE
(x1)
WOOD SCREWS
(WALL HANG)
(x2)
WOOD SCREWS
(WALL HANG)
(x1)
UIS EXTENSION
CORD (M-M)
(x1)
UIS EXTENSION
CORD (M-M)
(x1)
SMART
CONTROLLER
(x1)
ALL MODELS
SENSOR
PROBE
(x1)
FAN
SYSTEM
(x1)
FAN
SYSTEM
(x1)
WOOD SCREWS
(PLATE MOUNTING)
(x4)
WALL
ANCHORS
(x4)
WIRE
TIE
(x1)
MACHINE
SCREWS
(x4)

9
CHANGING FAN DIRECTION
STEP 1
Unplug the unit before flipping
the internal fan, and double
check to make sure that it is
completely unpowered.
Remove the front and back screws
using a Phillips screwdriver to
separate the internal fan from the fan
shell and front plate.
STEP 2
Identify the airflow direction to achieve your
desired configuration; airflow will blow on the
label side.
Take out the fan and flip it over. When placed
back in the shell, position the power cord SR to
the shell slot to secure the cord.
AIRTITAN S3/S7 and T3/T7
A B
BA
AIRTITAN S3/T3 illustration shown above.
AIRTITAN S3/T3 illustration shown above.

10
CHANGING FAN DIRECTION
STEP 3
Reapply the screws to secure the shell and
back plate to reassemble the fan.
AIRTITAN S3/S7 and T3/T7
A B
NOTE: For AIRTITAN T8 Series, we offer both intake and exhaust configurations.
AIRTITAN S3/T3 illustration shown above.

11
FAN MOUNTING
STEP 1
Remove any existing grilles, vents, or covers
on ventilation opening where you wish to install
the fan unit.
STEP 2
Position the fan unit over the ventilation opening.
Depending on the model, the unit may be facing
towards or away from the wall. Please be sure to
check the airflow direction prior to installation.

12
FAN MOUNTING
STEP 3 (Wall and Surface Mounting)
Secure the mounting frame onto the surface
with the included wood screws. If using a
machine screw with nuts, you may need to
drill a hole.
STEP 3 (Foundation Block Mounting)
To install the unit onto a foundation brick or
block, mark the mounting hole locations using
the four corners of the metal face plate. Then
drill 5/16" holes with a drill bit. Install wall
anchors into openings and secure the unit into
the wall with four screws.
AIRTITAN T8/T8N Illustration shown above.
AIRTITAN T8/T8N Illustration shown above.

13
POWERING AND SETUP
AIRTITAN S3/S7
STEP 2
Plug the fan's power cord into an AC power
outlet to power it and the controller.
STEP 1
Use the included UIS M-M extension cord
to connect the fan's EC Motor box to the
S-Series controller.

14
POWERING AND SETUP
AIRTITAN T3/T7
STEP 1
Use the included UIS M-M extension cord to
connect the fan's EC Motor box to one of the
controller's ports.
STEP 2
Plug the sensor probe into the controller’s
3.5mm jack. Route the probe head to spot
areas as needed.
Keep the probe cord away from your HID*
grow light ballast's power cord to ensure the
controller properly detects climate conditions.
*MH, HPS, CMH, or CHPS

15
POWERING AND SETUP
AIRTITAN T3/T7
STEP 4
You may use the included tie mounts and wire
ties to manage the cords.
Secure the tie mounts onto a surface. Loop the
wire ties around the cords into the tie mounts.
STEP 3
Plug the fan's power cord into an AC power
outlet to power it and the controller.

16
POWERING AND SETUP
STEP 1
To set up temperature monitoring, plug the
male connector of the thermal probe into the
designated probe port located at the bottom
side of the fan unit.
STEP 2
Plug the fan's power cord into an AC power
outlet to power it.
AIRTITAN T8/T8-N

17
CONTROLLER MOUNTING
AIRTITAN S3/S7
STEP 1 — WALL MOUNTING
Locate a spot free of obstruction and secure
the anchor into your wall. Twist the wood screw
into the anchors.
STEP 2 — WALL MOUNTING
Hang the controller by the screw using the hole
on the backside.

18
CONTROLLER MOUNTING
AIRTITAN S3/S7
MAGNET MOUNTING
Mount the controller on a steel surface using
the magnet located behind the label.

19
CONTROLLER MOUNTING
AIRTITAN T3/T7
STEP 1 — WALL MOUNTING
Locate a spot free of obstruction and secure the
anchors into your wall. Twist the wood screws
into the anchors.
STEP 2 — WALL MOUNTING
Hang the controller by the screws using the
holes on the backside.

20
CONTROLLER MOUNTING
AIRTITAN T3/T7
MAGNET MOUNTING
You may also mount the controller onto a steel
surface using the magnet located behind the label.
CORD ARRANGEMENT
Cords may be routed into or outside of the
kickstand grooves, and through a cut hole
behind the controller.