Accele optix 360 RVMDVR360 User manual

QUALITY PRODUCTS FOR THE PROFESSIONAL INSTALLER
REARVIEW MIRROR
360 DVR
MODEL : RVMDVR360
pt x
360

6
8
TABLE OF CONTENTS
INTRODUCTION 3
Contents
DEVICE 4
INSTALLATION 5
Wiring
MODE
MOUNTING
MODEL : RVMDVR360
SETTING 7
QUICK START
pt x
360

MODEL : RVMDVR360
INTRODUCTION
Congratulaons on your purchase of the Opx “ REARVIEW MIRROR 360 DVR ” . With rear view mirror installed, you
are able to have a great visual of what is behind your vehicle. You also get a plugin rear view camera. The “RVMDVR360”
Rearview Mirror not only allows you to see behined you but also record a 360 view while driving.
Contents
1- Rear view mirror
1- Back-up camera
1- Hardwire plug
1- Camera extension cable
1- Bag with glass mount, cable es, wire covers and 2 screws for rear view camera
pt x
360

INSTALLATION
1. Determine installaon locaon and verify if mount is compable. Remove your stock rearview mirror and verify the
mount is the appropriate one for your make and model vehicle. If mount is correct, place your new “RVMDVR360” on
the exisng glass mount. Run the cables down the pillar like the image below.
2. Once Mirror is in Place and the cables have been ran down the pillar, you may now begin the process of running the camera
cables to run the appropriate locaon in the rear of the vehicle.
Run Wires
down “A” Pillar
Includes:
• 1 Rearview Mirror
• 1 Camera for back up
DEVICE
MODEL : RVMDVR360
NOTE:
SD card is not included we recommend a
class U1 or Class U3 quality Purposes. A
minimum of 32GB for Spacious comfort
on your recordings
pt x
360

INSTALLATION
1. Determine installaon locaon and verify if mount is compable. Remove your stock rearview mirror and verify the
mount is the appropriate one for your make and model vehicle. If mount is correct, place your new “RVMDVR360” on
the exisng glass mount. Run the cables down the pillar like the image below.
2. Once Mirror is in Place and the cables have been ran down the pillar, you may now begin the process of running the camera
cables to run the appropriate locaon in the rear of the vehicle.
Run Wires
down “A” Pillar
REARVIEW CAMERA EXTENTION PLUG
MODEL : RVMDVR360
NOTE:
If vehicle has no glass mount
a glass mount is provided for
you. Purchase Glass mount glue
seperatly.
7. Eye of the 360 camera
8. SD slot
9. Mount slides right on to
Glass mount
pt x
360

MODEL : RVMDVR360
MODE
A fascinang feature included in the “RVMDVR360” is the capability to adjust
and view all of these dierent angles while connuing to record a 360 view.
pt x
360

MODEL : RVMDVR360
SETTING MENU
1. Record
2. Snap a picture
3. View Content
4. Sengs
5. View Mode
6. Power Buon
pt x
360

MODEL : RVMDVR360
Dierent cars have dierent brackets, make sure your windshield
mount matches the mount on the “RVMDVR360”. If you would like
to replace the glass mount, follow the instrucons as in the diagram.
Use the appropriate adhesive to glue glass mount to your windshield.
Add the glue on the larger at surface and let it cure appropriately
before placing the mirror on the windshield mount.
Once Glass mount has cured slide the mirror down on the glass mount
and ghten the screw with the tool provided. Do not put heavy force
when sliding the mirror on the mount. Failure to do so may cause
braking windshield.
Accele Electronics will not be responsible for damages caused to your
car due to improper mirror installaon.
MOUNTING
pt x
360

MODEL : RVMDVR360
QUICK START
Accele Electronics will not be responsible for damages caused
to your car due to improper mirror installaon. For complete
owners manual please visit
hps://accele.com/technical-support-ii/rvmdvr360
Thank you for being a valued customer of Accele Electronics.
1. Remove old Mirror carefully and Idenfy if
bracket and mount are the same
2. Aer idenfying the correct mount, Slide the
Mirror to the mount and ghten to secure its
posion.
3. Fish out the cables from the headliner and run
them down the “A” pillar.
4. Idenfy where you will be making your
connecons (ignion,12V baery constant,
ground, and your backup camera). Run your cables
to the desired locaon.
5. Aer all connecons have been made, adjust
the mirror gently to your height/preference.
pt x
360