acerpure pro Series User manual
User Manual
使用說明書
Series
Air Purier
Model:
AP352-10W
AP552-10W
www.acerpure.com
Copyright©2022AcerPure Inc. All Rights Reserved.
2
3
User Manual
Thank you very much for purchasing this
product. Please make sure to read this manual
carefully, use this product correctly, and store it
properly.
4
Table of Contents
Safety Instructions 05
Introduction to the Accessories 06
Product Structure 06
Introduction to the Panel Screen 07
Disassembling and Maintenance 08
Checking Air Quality 09
Before Seeking After-sales Service 10
Product Specications and Company Information 11
5
This product is for family and oce use
Do not use it for other purposes.
Check whether the power cable and plug are
damaged before use.
Do not bend or tug on the power cable in order to
prevent poor connection.
If the cord set is damaged, it must be replaced by a
special cord set available from manufacturer or its
service agent
Check whether the voltage is consistent when the
indication on the voltage label of this product before
use.
Switch o the power before unplugging the power
plug. Do not touch the power plug with wet hands in
order to prevent the danger of electric shock.
Children should be supervised to ensure they do not
play with electrical appliances.
Use of this product without proper assembly is strictly
prohibited; it is also prohibited to insert your hand or
sharp objects into the grill of the air circulator to
prevent accidents from occurring.
Do not hang clothes on the product, and do not use it
at places with barriers or unstable places.
This product can be used by the children aged from 8
and above or person with physiological, perceptual,
mental ability, experience or knowledge deciencies
under the supervision or guidance of the person
responsible for their safeties.
Do not spray liquids such as volatile agents or
insecticides on this product.
Do not use this product at places with high
temperature (over 40°C), high humidity (such as
bathrooms), dusty orwhere acid-base oils can
easily spill.
Unplug the power plug if this product is not used
for an extended period of time. Especially when
there are emergencies such as thunder and
lightning, earthquakes or res, please switch o the
power and unplug the power plug immediately.
This product only requires external cleaning and
maintenance; do not clean the surface with rough
cleaning tools, and do not rinse it with water
directly.
*Cleaning and user maintenance shall not be made
by children.
If the product was accidentally immersed in water,
please stop using it immediately and contact
customer service personnel.
If you discovered any abnormalities such as noises,
smoke or strange odors, please switch o the power
immediately, unplug the power plug and contact
customer service personnel.
This product may not be repaired or modied by
repairers who are not authorized by our company. If
the power cable is damaged, it must also be
replaced by authorized repair personnel in order to
avoid danger.
Please refer to the company information at the end
of this manual on how to contact customer service.
Safety Instructions means it is
“prohibited”
means “caution”
is required
6
Introduction to the Accessories
Product Structure
Product Assembly Method
Product Accessories
Host
Filter
User Manual +
Warranty Card
Power cable
1 2 3 4
Air outlet
1Dust (PM2.5) sensor
4
1
3
2
Filter cover handle
5
3-in-1 Plus HEPA lter
(for AP352-10W)
4-in-1 HEPA lter
(for AP552-10W)
6
Air inlet
3
LED display and
control panel
2
4
5
6
7
Introduction to the Panel Screen
Smart Mode
When operating in the Smart mode, the proper
operation speed is adjusted automatically
based on the air quality status (green, yellow, or
red light). When you adjust to other speeds, the
Smart symbol won’t be displayed on the panel.
Power Button
You can start or stop using this product.
speeds (Smart Mode, Low , Middle , High and
Turbo Mode). You can adjust the speed accord-
ing to your needs. The product shows the speed
status with a white line circulating around the
Air Quality Indicator
This product uses the three color lights of
green, yellow, and red to indicate the PM2.5
particle level (good, OK or poor). The displayed
button.
Filter Change Indicator
When this product has been operating for 3,000
and hold the power button for 3 seconds to
Quite mode
3 seconds to enable quite mode and another 3
seconds to cancel it.
*
*
Note that once the quite mode is enabled, the
product will adjust to low speed 15 seconds after
adjustments are completed, the display panel
will show the quite mode indicator only.
1
6
2
4
3
5
1
4
5
6
2
3
When the filter cover is not covered properly on
the product, red light will flashing on the panel.
8
Disassembling and Maintenance
Disassembly and Assembly of the Filter
* It is recommended to replace the lter every 3,000 hours.
* When the lter indicator ashes, please remove the lter and replace or clean the lter based
on the lter's cleanliness.
* After reinstalling the lter to this product, press and hold the power button for 3 seconds to
switch o the lter change indicator.
* Avoid tugging on the power cable during the disassembly process in order to prevent the
power cable from breaking.
* When using this product for the rst time or replacing a new lter, please remove the
packaging bag of the lter rst and then start using this product.
2. Remove the lter and
replace it with a new lter.
3. Place the lter cover
back onto the product.
1. After switching o the power and
unplugging the power plug, pull the
handle on the lter cover behind
the product backward.
1 2 3
Use a vacuum cleaner to
clean the dust in the air
outlet and inlet.
Use a soft cloth to wipe
the exterior and the
sensor cover at the
back of the product.
This product only requires general external cleaning
and maintenance (as shown in the gure).
Do not wipe with thinner, toluene, acidic cleansers,
lamp oil, alcohol, or chemical cloth in order to avoid
discoloration or deterioration.
Please note: After maintenance and cleaning, wait
for the product to fully dry before connecting power
to use again or storing. If the product needs to be
stored, please place the product back into the
packaging box in the original packaging order, and
place it at a dry location for safekeeping.
Maintenance
Prior to cleaning or other maintenance, the appliance
must be disconnected from the supply mains.
9
Checking Air Quality
You can learn the air quality of the room used based on the air quality indicator of this product.
The indicator lights in the table below represent the level of PM2.5 removal.
Indicator color Recommended purier wind speed
Green Low
Yellow Middle
Red High
10
Before Seeking After-sales Service
If you discovered that the product malfunctioned, please check the following items before contacting customer
service.
Problem Possible cause Solution
Product does not turn on Is the power plug plugged in the
outlet properly?
Please plug the power plug of this
product in the outlet correctly.
Buttons of the control panel have no
responses Is the child lock function enabled?
Please press and hold down the
purier wind speed button for 3
seconds to disable the child lock
function.
Red light keeps being displayed for
the indoor air and cannot be puried
Is there excessive dust or harmful
allergens accumulated on the lter?
Please clean the lter of the purier
properly, or replace the lter directly.
Are there other sundries around the
product?
Please remove the sundries around
the product.
Is the product placed in a corner? Please move the product and place it
elsewhere.
Is the product placed and used at a
location that is too open or wide?
Please place the product in a
suitable indoor space for use, and
avoid placing it next to a ventilated
window.
Is the indoor air itself seriously
polluted?
Please ventilate the room rst and
then use this product.
When the noise is too loud Is the product placed on an uneven
oor or table top?
Place move the product to a at oor
or table top.
11
Product Specications
Product Specications
Product name Air Purier
Product model AP352-10W (application to 3-in-1 Plus HEPA lter)
AP552-10W (application to 4-in-1 HEPA lter)
Rated voltage
110V/60Hz (Taiwan specications only)
220-240V 50/60Hz
Rated power
33W (Taiwan specications only)
38W
Net weight 4.2 kg
Product dimensions 253 x 253 x 576mm
Place of origin China
Company Information
For online user manual ,please nd the les on www.acerpure.com.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the en-vironment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems
or contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.
12
13
14
15
16
16
17
18
19
20
21
15
16
1 2 3 4
1
4
1
3
2
5
6
3
2
4
5
6
17
1
6
2
4
3
5
1
4
5
6
2
3
18
1 2 3
19
20
Other manuals for pro Series
2
This manual suits for next models
2
Table of contents
Languages:
Other acerpure Air Cleaner manuals
