Creative Solutions for the Digital Life™
Installation Guide
MoCA Network Adapter Installation Guide
Step4Locate the coaxial cable connected to the wall
outlet in the room with the Broadband Modem/Router.
Connect the coaxial cable to the COAX NETWORK port on
the back of the unit.
Step5Plug one end of the power adapter into
the Power port on the back of the MoCA Network
Adapter.Then plug the other end into an electrical
wall outlet.
Step6Plug one end of the 2nd Ethernet Cable
into the Ethernet Network port on the front of the
2nd MoCA Network Adapter.
Step7Plug the other end of the Ethernet Cable into the Ethernet Port on the
device you want to connect to the Internet.
Step8Locate the coaxial cable connected to the wall outlet in the room with
the device that you want to connect to the Internet.Connect the coaxial cable to
the COAX NETWORK port on the back of the MoCA Network Adapter.
Step9If necessary, locate the coaxial cable
connected to your Set Top Box or Television.Make
sure this cable is connected from yourTV/SetTop Box
to the STB/TV port on the MoCA Network Adapter.
Step
10 Plug one end of the 2nd power adapter
into the Power port on the back of the MoCA
Network Adapter.Then plug the other end into an
electrical wall outlet.Please make sure that both
Coax and Ethernet lights turn solid green on both adapters.
Congratulations! You have successfully connected your device to the Internet.
www.actiontec.com
Stock# 0530-0596-000 S1018/0209
Ethernet to Coax
MoCA Network
Adapter Model#ECB2200
This uick Start Guide will walk you through the easy steps to use your existing
coaxial wiring as an Ethernet network connection.You will need a minimum of two
MoCA Network Adapters.One to connect to your router, the other to connect to
any Ethernet capable device.
Typical usage includes connecting network capable equipment to your home
entertainment center.
You will need the following items :
•(2) MoCA Network Adapters •(2) Power Adapters •(2) Ethernet Cables
Step1Get one MoCA Network Adapter.
Step2Find your Broadband Modem/Router.
Plug one end of the 1st Ethernet Cable into the
Ethernet Network port on the front of the 1st MoCA
Network Adapter.
Step3Plug the other end of the Ethernet Cable
into an OPEN Ethernet Port on your Modem/ Router.
An Ethernet port looks similar to a phone port but is
slightly larger.
continued on the back
www.actiontec.com
