ActionTec ECB6000 User manual

Coaxial-to-Ethernet
Conversion Kit
User Guidev1
MoCA Network Adapter
Model # ECB6000

Table of Contents
Table of Contents 1
Getting Started 3
Introduction 3
Package Contents 4
Requirements 4
Features 4
Connecting the Adapter 5
Connecting the First Adapter 5
Connecting Additional Adapters 7
Specications 9
Notices 11
Warranty 11
GPL Info 11
1

Network Adapter
EU CE Declaration of Conformity 12
Technical Support 12
2

Getting Started
Introduction
Congratulations on your purchase of a MoCA Network Adapter. e
Adapter is a exible solution for extending your home network. By
leveraging the ubiquity of coaxial cabling within the modern home, the
Adapter allows you to set up n Ethernet Internet port anywhere you’ve
got a coaxial connection.
is user manual will take you through the procedures needed to connect
the Adapter.!
3
Ethernet
Power
Power Coax
Coax In
ECB6000

MoCA Network Adapter
Package Contents
• MoCA Network Adapter
• Coaxial cable
• Power adapter
• Quick Start Guide
• Wall-mount template
Requirements
• Available coaxial port in installation areas
• Available electrical wall socket in installation areas
Features
• Gigabit Ethernet port
• Power and Coax LEDs
!
!
4

Connecting the Adapter
Connecting the MoCA Adapter is a relatively simple process that involves
connecting the Adapter to your broadband modem/router via Ethernet,
and then to the coaxial network. e Adapter takes the Internet signal
from the coaxial network and extends your network. Additional Adapters
can be installed throughout your home or oce wherever you need
Ethernet Internet access, and there is an available coaxial port.
Connecting the First Adapter
e rst MoCA Adapter must be connected to the broadband modem/
router, and then to the coaxial network. is Adapter takes the Internet
signal from the modem/router and delivers to the coaxial network.
To connect the rst Adapter:
1. Connect a coaxial cable into a coaxial wall port near the modem/
router.
2. Connect the other end of the coaxial cable installed in step 1 to the
Coax In port on the side of the Adapter.
3. Connect one end of an Ethernet cable into the Ethernet port of the
modem/router.
4. Connect the other end of the Ethernet cable into the Ethernet port on
the side of the Adapter.
!
5

MoCA Network Adapter
5. Plug the provided power adapter into the Power port on the side of
the Adapter.
6. Plug the other end of the power adapter (external, 5V DC, 2A, made
by APD, model #WA-10P05FU) into an electrical outlet.
When complete, the setup should look similar to the gure below:
e Internet signal is now being delivered across the coaxial network.!
6
Power
Outlet
Power
Adapter
Coaxial
Outlet
Coaxial
Cable
Ethernet port
of broadband
modem/router
Ethernet
Cable
Ethernet
Power
Power Coax
Coax In
ECB6000

MoCA Network Adapter
Connecting Additional Adapters
If necessary, additional Adapters can be placed in locations around the
home/oce that need an Ethernet Internet connection, but at present
only have a coaxial port.
To connect additional Adapters:
1. Connect a coaxial cable into a coaxial wall port near the modem/
router.
2. Connect the other end of the coaxial cable installed in step 1 to the
Coax In port on the side of the Adapter.
3. Connect one end of an Ethernet cable into the Ethernet port of the
device to connect to the Internet.
4. Connect the other end of the Ethernet cable into the Ethernet port on
the side of the Adapter.
!
7

MoCA Network Adapter
5. Plug the provided power adapter into the Power port on the side of
the Adapter.
6. Plug the other end of the power adapter (external, 5V DC, 2A, made
by APD, model #WA-10P05FU) into an electrical outlet.
When complete, the setup should look similar to the gure below:
e device is now connected to the Internet via Ethernet.!
8
Power
Outlet
Power
Adapter
Coaxial
Outlet
Coaxial
Cable
Ethernet port of
device to connect
to Internet (PC/laptop,
game console, or
media player)
Ethernet
Cable
Ethernet
Power
Power Coax
Coax In
ECB6000

MoCA Network Adapter
Specications
Model Number
ECB6000
IP
LAN MoCA
LAN Ethernet Port 10/100/1000 (1)
LAN Connections
LAN MoCA frequency: 1125 MHz - 1425 MHz (6 channel)
LED Indicators
Power, Coax
Power
External, 5V DC, 2A"
Made by APD, model #WA-10P05FU
Regulatory
FCC part 15, UL-60959-1
!
9

MoCA Network Adapter
Environmental
Operating temperature - 0º C to 40º C (32ºF to 104ºF)
Storage temperature - 0ºC to 70ºC (32ºF to 158ºF)
Operating humidity - 10% to 85% non-condensing
Storage humidity - 5% to 90% non-condensing
Note: Specications are subject to change without notice.
!
10

Notices
Warranty
is product has a one-year Limited Hardware Warranty and 90-day free
soware updates from date of purchase.
Local Law
is Limited Warranty Statement gives the customer specic legal rights.
e customer may also have other rights which vary from state to state in
the United States, from province to province in Canada, and from
country to country elsewhere in the world.
To the extent that this Limited Warranty Statement is inconsistent with
local law, this Statement shall be deemed modied to be consistent with
such local law. Under such local law, certain disclaimers and limitations
of this Warranty Statement may not apply to the customer.
Go to http://www.actiontec.com/products/warranty.php for more
information.
GPL Info
For GNU General Public License (GPL) related information, go to http://
opensource.actiontec.com
!
11

MoCA Network Adapter
EU CE Declaration of Conformity
To obtain the complete Declaration of Conformity form in socopy, go to
the Actiontec Electronics Declarations of Conformity EU/EEA website at
http://international.actiontec.com/support/doc
e symbol below is placed in accordance with the European Union
Directive 2002/96 on the Waste Electrical and Electronic Equipment (the
WEEE Directive). If disposed of within the European Union, this product
should be treated and recycled in accordance with the laws of your
jurisdiction implementing the WEEE Directive.
Technical Support
Go to http://international.actiontec.com/support for product support,
updates, and more information including:
• Firmware updates
• Troubleshooting
• Registration
• FAQs
Technical Support Phone Number
United States: 1-888-436-0657
12