ActionTec ScreenBeam Pro SBWD100A EDU User manual

Wireless Display
Receiver
Model # SBWD100A
Installation Guide
This Installation Guide will walk you through the easy steps
to set up your ScreenBeam Pro Receiver. During this
process, we’ll show you how to :
AInstall the Receiver
B1Connect Using
Intel WiDi App
B2Connect Using
Windows 8.1 or Higher
B3Connect Using WiFi
Miracast-Enabled Device
NEXT
B2 Connect Using Windows 8.1 or Higher
Step1On a Miracast-enabled Android device, locate and open
the Wireless Display Application.
Note: The name of the Wireless Display Application depends on
the device type and model. Refer to the device’s carrier or
manufacturer user manual for more details.
Step2The Wireless Display Application scans for available
receivers. Select the ScreenBeam Receiver from the list.
Step3Wait for the device to associate with the Receiver. When
it does, the device’s screen will be displayed on the HDTV.
© 2013 Actiontec Electronics, Inc. ScreenBeam Pro and the Actiontec logo are
registered trademarks or trademarks of Actiontec Electronics, Inc., in the U.S. or
other countries. All other names are properties of their respective owners.
This product has a 1-year Limited Hardware Warranty and 90-day free software
updates from date of purchase.
Local Law
This Limited Warranty Statement gives the customer specic legal rights. The
customer may also have other rights which vary from state to state in the United
States, from province to province in Canada, and from country to country
elsewhere in the world.
To the extent that this Limited Warranty Statement is inconsistent with local law,
this Statement shall be deemed modied to be consistent with such local law.
Under such local law, certain disclaimers and limitations of this Warranty
Statement may not apply to the customer.
Go to http://www.actiontec.com/products/warranty.php for more information.
Go to http://international.actiontec.com/support for product
support, updates, and more information including:
• Firmware Updates • Troubleshooting • Registration • FAQs
Part No: 0530-0688-002
Step1From the Windows desktop,
navigate to the Charms menu and
select Devices. You can also use the
shortcut keys, Windows + K.
Step2From the Charms menu,
click the Project icon.
Step3From the Project screen,
select Add a wireless display.
Step4Select the ScreenBeam
Receiver from the list.
Step5Enter the PIN as displayed
on the television screen, then
connect and display. CProduct Support & Additional Information
Declarations of Conformity (DoC)
To obtain the complete DoC form in softcopy, go to the
Actiontec Electronics Declarations of Conformity EU/EEA website
at http://international.actiontec.com/support/doc
For GNU General Public License (GPL) related information, go to
http://opensource.actiontec.com
The symbol at right is placed in accordance with the European
Union Directive 2002/96 on the Waste Electrical and Electronic
Equipment (the WEEE Directive). If disposed of
within the European Union, this product should be
treated and recycled in accordance with the laws of
your jurisdiction implementing the WEEE Directive.
B3Connect Using Miracast-Enabled Device
You can connect to ScreenBeam Pro from a Miracast-enabled
Android device, such as a smartphone, tablet, or game console
(nd the wireless display feature under Settings). Also, the device
should be running the latest software for best performance.
Note: If you are running Windows 8.1 and the screens above do
not appear, go to http://www. actiontec.com/widi81 for the latest
software updates.

Welcome!
Step2Plug one end of the power cord into the Receiver, and
the other end into a power outlet.
Step3Plug one end of the supplied HDMI cable into the HDMI
port on the Receiver, and the other end into an available HDMI
port on the HDTV.
NEXT
Flip this Guide over to continue
AInstall the Receiver
Congratulations on your purchase of a ScreenBeam Pro Wireless
Display Receiver. The Wireless Display Receiver connects to your
compatible Intel WiDi or Miracast wireless display-capable de-
vice, and displays the device’s screen on your HDTV.
B1Connect Using Intel WiDi App
Step2The device scans for
available receivers. Select the same
receiver name as seen on the HDTV
and click Connect. (The Connect
Automatically checkbox is optional.)
Step3Wait until the Receiver
displays a PIN on the HDTV, and a
PIN entry box on the screen of the
WiDi device. Enter the PIN in the
PIN entry box on the WiDi device,
then click Continue.
Step1Get the ScreenBeam Pro Wireless Display Receiver,
power cord, and HDMI cable from the ScreenBeam Pro box.
Step1Find the Intel Wireless Display application on the device
and launch it. To nd the application, go to Windows Search on
your device and search for“Intel WiDi” in your apps.
Note: Make sure the device supports Intel Wireless Display (WiDi)
software version 3.5 or higher. To nd out what version of Intel
WiDi your device has, enter the Intel WiDi application and click
Help, then navigate to the“About WiDi”section. To obtain the
latest Intel WiDi software and drivers, go to:
http://www.intel.com/go/wirelessdisplayupdate
Step4The HDTV displays
messages to show the status of the
connection process.
Step4Make sure the HDTV is turned on and set to display the
input from the correct HDMI port (the one you plugged into
during Step 3).
Display Tip: If the edges of the device screen cannot be seen on
the HDTV, adjust cropping. To do this, enter the WiDi application
and click Settings. Navigate to the“Picture and Sound” section,
click Adjust cropping…, and adjust the HDTV picture by clicking
plus (+) or minus (-).
Step5Verify that the Ready to
Connect screen appears on
the HDTV.
Step5AConnection Successful
screen appears on your device’s
screen, as well as on the HDTV.
When Steps 1, 2, and 3 are complete, the hardware should be
connected as shown in the gure, below.
Note: The power outlet and cable may appear dierent than
those shown in the gure.
Note: If your device’s OS is Windows 8.1 or higher, proceed to
section B2(“Connect Using Windows 8.1 or Higher”) for
connection instructions.
The ScreenBeam Pro Receiver is now connected to your HDTV.
Proceed to one of the next three sections of this Guide
(depending on the device you are using to connect to
ScreenBeam Pro) to nish the connection procedure.