ADC ComProtect Building Entrance Terminals (BET) User manual

www.adc.com • [phone] • 1-800-366-3891
Spec Sheet
ComProtect®Building Entrance Terminals (BET)
Enclosed, Integrated Protection with LSA-PLUS®Series 2 Blocks
ADC's ComProtect Building Entrance Terminals provide high-density primary protection at commercial
demarcations and are fully compliant to UL®and Telcordia®specifications. These units can be used in
both indoor and outdoor applications and provide up to 50% space savings over traditional Building
Entrance Terminals using 5-pin protection.
MS2® is a registered trademark of 3M.
UL® is a registered trademark of Underwriters Laboratories.
Telcordia®is a registered trademark of Telcordia Technologies, Inc.
Features:
Telcordia approved ComProtect protection•
modules safeguard valuable cable plant and
equipment from voltage surges and spikes
Lockable metal enclosure with Telco•
override cover and a splicing chamber with
the choice of either 710 or MS2® splice
connectors
LSA-PLUS cross connect field and protection•
field combined for High-Density Solution
Lightweight, compact and removable top to•
enable stacking units
Instructions, template and mounting•
hardware included to mount the terminal
directly to a wall
Reduced size over traditional BET footprint•
for tight to fit spaces
Applications:
Primary protection at commercial and MDU•
demarcation points
Primary protection for campus environments•
Compliances:
U L• ®497 listed
100% compliant with Telcordia GR-937•
100 pair 50 pair

8/08•106712AE ComProtect®Building Entrance Terminals
ComProtect®Building Entrance Terminals (BET)
Enclosed, Integrated Protection with LSA-PLUS®Series 2 Blocks
2
www.adc.com • [phone] • 1-800-366-3891
Specifications
ELECTRICAL CHARACTERISTICS:
BET Dielectric Withstand 4000 VDC
CONSTRUCTION CHARACTERISTICS:
MECHANICAL CHARACTERISTICS:
LSA-PLUS Series 2 Subscriber Interface:
Contact Resistance < 1 m Ω
Insulation Resistance ≥5 x 104MΩ
Contact Material Copper Alloy
Contact Plating Silver
Number of Test Cord Insertions > 750
IDC Reterminations 200
Wire Diameter Range for Solid and Stranded Copper Conductors:
Two Conductors per Contact (same diameter) 22-26AWG 0.65to0.40mm
    (0.026"to0.016")
One Conductor per Contact 20-26AWG 0.90to0.40mm
    (0.035"to0.016")
Wire Insulation Diameter Range (PE,PVC) 0.68mmto1.60mm
    (0.027"to0.063")
ENVIRONMENTAL CHARACTERISTICS:
Dimensions:
Indoor/Outdoor
25-pair and
50-pair
252.22mmx314.96mmx165.10mm
9.93"Hx12.40"Wx6.50"D
100-pair 377.19mmx314.96mmx161.10mm
14.85"Hx12.40"Wx6.50"D
Operating Temperature:
Indoor/Outdoor -40˚to80˚C(-40˚to176˚F)

8/08•106712AE ComProtect®Building Entrance Terminals
ComProtect®Building Entrance Terminals (BET)
Enclosed, Integrated Protection with LSA-PLUS®Series 2 Blocks
3
www.adc.com • [phone] • 1-800-366-3891
Description Catalog Number
25-pair Indoor/Outdoor
Enclosed building entrance terminal Quantity: 1
710 splice connector input  6649CP2720-00
MS2® splice connector input  6649CP2760-00
50-pair Indoor/Outdoor
Enclosed building entrance terminal Quantity: 1
710 splice connector input  6649CP2820-00
MS2® splice connector input  6649CP2860-00
100-pair Indoor/Outdoor
Enclosed building entrance terminal Quantity: 1
710 splice connector input  6649CP2920-00
MS2® splice connector input  6649CP2960-00
Ordering Information
ComProtect overvoltage protection modules sold seperately.
Other configurations available; please contact ADC Technical Assistance Center.
MS2® is a registered trademark of 3M.

Spec Sheet
Website: www.adc.com
FromNorthAmerica,CallTollFree:1-800-366-3891•OutsideofNorthAmerica:[phone]
Fax:[phone]•ForalistingofADC’sglobalsalesofficelocations,pleaserefertoourwebsite.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
106712AE 8/08 Revision © 2008 ADC Telecommunications, Inc. All Rights Reserved