Addonics Technologies ADSSSAU2 User manual

Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: [phone]
Email: http://www.addonics.com/support/query/
v7.1.11
www.addonics.com
T E C H N O L O G I E S
User Guide
Slim ATAPI SATA to USB 2.0/1.1 Converter
(ADSSSAU2)

www.addonics.com
Phone: [phone]
Fax: [phone]
Email: http://www.addonics.com/sales/query/
CONTACT US
Installation Instructions
1. Screw the nut washer into the screw holes on the back of the slim SATA optical drive as
shown below.
2. Attach the slim SATA to USB Converter (ADSSSAU2) onto the slim SATA optical drive
connector.
3. Secure the Converter onto the optical drive using the PCB mounting screws provided.
4. Attach the USB 5-pin header or USB A-B cable onto the ADSSSAU2 for data
connection, and the 4-pin floppy power cable to power the unit.
Reference for USB 5-Pin Header Pin Assignment
USB A-B Port for External Connection to Computer
USB 5-Pin Header for Internal Connection to the Motherboard
4-Pin Floppy Power Connection
Slim SATA connection
Mounting Hole Locations
for the Nut Washer
Pin Name Cable Color Description
1 VCC Red +5V
2 D- White Data -
3 D+ Green Data +
4 GND Black Ground