Addonics Technologies External CipherChain User manual

www.addonics.com
Addonics Technologies Inc.
1918 Junction Avenue, San Jose, CA 95131
Phone: [phone] | Fax: [phone]
INTRODUCTION
The External CipherChain is a unique security tool that you can use for a
variety of storage applications. Built on a FIPS certified AES 256-bit crypto
engine, the External CipherChain is the perfect solution to secure sensitive
data stored on external RAID storage, hard drive, SSDs. You can even
secure popular flash media when connected to the External CipherChain
by using the Addonics eSATA DigiDrives. The External CipherChain can
also be used as a drive sanitization tool for removing any sensitive data
stored on an used hard drive or flash media.
Similar to the Addonics field proven CipherChain, the External
CipherChain is very easy-to-use and implement. As a simple pass through
device between the storage device and the system, once connected up,
the simple ion of the Cipher key will activate the encryption and decryption
of the data on the fly with no noticeable performance degradation. There is no software or driver to install and no
special training required. It is as easy as using a key to open a door. The External CipherChain is Operating System
independent and will work on any system.
Model: CCEXA256
External CipherChain
Any external storage device with eSATA or SATA connection can be attached to the External CipherChain, which
in turn connects to any host via an eSATA port. Using an optional Addonics USB 3.0 - eSATA adapter, the External
CipherChain can connect to a USB 3.0 / 2.0 port on any computer. The compact size and rugged metal housing of
the External Cipherchain makes it extremely portable and easy to deploy in various environments where applica-
tions require solid data security. The External CipherChain operates at very low power and can be powered
directly by a system using various Addonics optional cables.
On the diagram below. Click on the computer to see various host connection options. Click on any eSATA device
to see different device connection options.

www.addonics.com
Addonics Technologies Inc.
1918 Junction Avenue, San Jose, CA 95131
Phone: [phone] | Fax: [phone]
Model: CCEXA256
FEAUTURES
External CipherChain
Security
The External CipherChain is a full disk encryption solution. This means that the boot sector, partition table and all
the information in the drive are encrypted. If the encrypted external drive is stolen, the drive will appear as a brand
new drive with no trace of any data. The AES 256-bit encryption provided by the External CipherChain is consid-
ered the highest level of encryption standard, secure enough to protect classified information designated as "Top
Secret".
Performance
The External CipherChain encrypts and decrypts data on the fly using a NIST and CSE certified cryptographic
AES engine. Unlike software encryption product which depends on system CPUs to encrypt and decrypt data, the
External CipherChain has no impact to CPU utilization. This leaves the system CPU to perform all its computing
task at normal speed. There is also no measurable impact to the performance on the hard drive.
Cipher key
The AES 256-bit Cipher key used for the encryption/decryption in the External CipherChain is the same Cipher
key as used in the Addonics Diamond Cipher drive kit, Ruby Cipher drive kit, CipherChain and CipherChain-E. As
a result, you can share the same encryption key to operate on the storage device that has been encrypted by
either the CipherChain, Diamond Cipher or Ruby Cipher drive kits. You may also order Cipher keys with the same
key codes when you order multiple CipherChain ES kits or Cipher keys. You may also re-programmed the Cipher
keys to other codes using the optional key management system or sending the keys to Addonics for the
re-programming service at no charge.
Drive Sanitization
The External CipherChain can also be used as a drive sanitization equipment for wiping clean all previous data on
a used hard or flash media by using the following operation procedures:
1. Connect the storage device to be sanitized into device side of the External CipherChain.
2. Connect the External CipherChain to the computer.
3. Initialize and perform a standard formatting (not quick format) of the hard drive or the flash media..
4. Transfer unimportant data to completely fill the hard drive or the flash media . This essentially writes over every
sector in the hard drive or the flash media with unimportant encrypted data that are not viewable to any OS. The
drive or the flash media, when connects directly to a system, will appear like brand new with no trace of any data
5. Now connect the drive or flash media directly to the computer. Initialize and format the hard drive or the flash
media with any OS to use it as a brand new hard drive or media
• Great for the following applications:
• Prevent sensitive data from unauthorized access when the storage device is lost or stolen
• Shipping or transporting storage devices containing sensitive data.
• Encrypt an entire RAID volume
• Drive sanitization - wipe clean of old data on used drive or flash media

www.addonics.com
Addonics Technologies Inc.
1918 Junction Avenue, San Jose, CA 95131
Phone: [phone] | Fax: [phone]
Model: CCEXA256
SPECIFICATIONS
External CipherChain
• Support the following storage devices:
• Any external hard drive, SSD or RAID storage with eSATA connection
• standard SATA I / II / III hard drive and SSD (require SATA - eSATA connecting cable and separate power to
the drive)
• Variety of flash media using one of the following Addonics flash reader/writer - Pocket UDD, Pocket
eSATA/USB DigiDrive,eSATAp CFast reader/wrier
• Addonics RAID Tower, Diamond ExDrive, Ruby ExDrive and Z drive enclosure with eSATA interface
• IDE drives with Addonics IDE - SATA converter.
• AES 256-bit encryption - the highest level of encryption standard
• FIPS 140-2 certified Crypto Module.
• Full disk encryption. No traceable data when the encrypted drive is connected to any system.
• Simple to use - no software to run or any password to remember
• No training required. Encryption / Decryption via a hardware key, just like using a regular key to open a door.
• System connection options -
• eSATA
• USB 3.0 or 2.0 - using optional Addonics USB 3.0 - eSATA adapter
• eSATAp port (Hybrid eSATA USB port)
• Power options:
• power adapter (included)
• USB port using optional USB power cable (AAUSBPCP24)
• eSATAp port - support both power and data using optional Addonics universal eSATAp cable
• High performance - up to 150 MB/sec
• OS independent - can be used on any system
Note on Cipher key code
Each pair of Cipher keys is set with a unique key code. When ordering multiple Cipher kits and extra Cipher keys and wish
that all the keys be set to the same key code, please provide instructions at the final checkout when placing the order at our
online store. Customers may also e-mail the instructions with reference to the sales order number after final checkout. When
ordering from an Addonics reseller or distributor, be sure to leave the instructions when placing the order. Keys can be sent
back to Addonics at any time if re-coding is desired there is no charge for re-coding keys, the only charge is the return
shipping of the newly re-coded keys.
• Onboard AES 256-bit crypto engine
• SATA I / II / III compliant
• Connectors:
• Host - eSATA
• Device - eSATA
• Cipher key hole - mini USB socket
• LEDs:
• Green - for power and the presence of key code
• Yellow - drive access activity
• RESET: To clear key code and reset the CipherChain. This also remove the drive icon when the storage device
is removed from the CipherChain connected to a hot swap SATA port.
• Disable RESET jumper - use for disabling the RESET button.
• Maximum throughput - 150 MB/sec
• Input power: 5V @ 150 mA
• Dimension: 106 x 92 x 24 mm (W x D x H) (4.17 x 3.62 x 0.94 in)
• Weight: 260 g (9.17 oz)
• Operating temperature and humidity: 0 °C to + 60 °C, 5% - 95% (non condensing)
• Storage temperature and humidity: -40 °C to + 85 °C, 5% - 90% humidity