Adhesive Dispensing TS710SG User manual

10ml Size
Manual Syringe Gun
USER GUIDE

Introduction
Thank you for purchasing the TS710SG hand operated syringe
gun. Our dispensing gun systems are built and pre-assembled
using high quality parts to ensure that your time is spent here
it belongs, on productivity. The TS710SG is built to accept most
10ml size syringe barrels. You can use pre-filled 10ml barrels
containing fluids such as solder paste, flux, silicone, RTV,
grease and PVA or use empty barrels from us and fill yourself.
This user guide ill ans er most of the more common
questions and help you to maximise the benefits from your ne
syringe gun dispensing system.
This version incorporates a fixed 1/8” rod movement and some
accessories required to achieve results. Designed for use on a
ork bench and as part of a production or assembly process,
e keep the dispensing system clean, simple and fast. This is a
simple system for setup straight out of the box.
To achieve maximum performance from Adhesive Dispensing
equipment, please read the instructions carefully.
After completing this guide, please do not hesitate to contact
the technical team at Adhesive Dispensing Ltd or contact your
authorised Adhesive Dispensing Ltd reseller.
Tel. [phone]
Fax. [phone]

Table of Contents
……………………………………………………………………………………………………………… Page
Specifications …………………………………………………………………………………………… 4
First Steps ……………………………………………………………………………………………… 5
Setup ……………………………………………………………………………………………………… 5
Reservoir Filling ………………………………………………………………………………………… 6
Component Selection Guide ……………………………………………………………………… 7
Component Selection Guide ……………………………………………………………………… 8
Troubleshooting ……………….. ……………………………………………………………………… 9
Warranty ………………………………………………………………………………………………… 10
Our Pledge
We offer you the assurance that our products will operate and perform to your
satisfaction. Our goal is to provide the highest quality products for use with your
industrial applications.
If for any reason you feel that you are not satisfied with our products, I would be
grateful if you would write or call me personally. We strive to develop strong
partnerships by delivering cost effective solutions that provide savings in assembly
time and raw materials. So your confidence and trust in Adhesive Dispensing td is
of the utmost importance to us.
S. Kerr
Technical Manager of Adhesive Dispensing td
This manual is for the express and sole use of ADL dispenser users and customers, and no part of this manual may be reproduced in any way.
© Adhesive Dispensing Ltd 2 7
Meets applicable CE requirements.

S ecifications
Capacity: 10ml (10cc)
Initiation: Manual Trigger Dispenser
Gun Materials: Polypropylene, nylon, EPR O-ring
Colour: Red body, white trigger and flange
ength: Polypropylene, nylon
Height: 135 mm
Weight: 110 gram (without filled syringe)
4

First Ste s
Step 1:
Unpack the shipping box and use the supplied delivery note to make sure all items
are present. If any items are missing or damaged, please contact us immediately.
Step 2:
Ensure the area where you are setting up the equipment is clean and follow safety
procedures of your adhesive Material Safety Data Sheet for safe handling.
Step 3:
Activate your one (1) year product warranty by filling in and returning by fax or email
the warranty card.
Insert Rod:
The gun is supplied with a suitable size plunger rod.
Align the flat end of the rod to the white gun end and
push in rod whilst pressing the white release button on
the top of the gun. ote: ever push or pull the rod without
pressing the white release button or it will cause damage.
Pull the rod back as far as it will go to show the plunger
end next to the o-ring.
This gun accepts 10cc size syringe barrels with wide
flanges. ocate the syringe end to the gun flange, push
on fully and twist anti-clockwise into place. The barrel
will sit over the o-ring on the gun.
Setu
5