ADIC FastStor 22 User manual

Follow the steps in this guide to
quickly get started using your
FastStor 22
Advanced Digital Information Corporation
Corporate Headquarters
11431 Willows Road NE Redmond, WA 98052
Telephone: [phone]
Fax: [phone]
ADIC Europe
ZAC des Basses Auges
1, rue Alfred de Vigny
78112 -Fourqueux, FRANCE
Fax: [phone]
World-Wide Web: http: //www.adic.com
For Customer Assistance:
In the United States and Canada, call ADIC Technical Assistance Center
(ATAC) at 1-800-827-3822
In Europe, call ADIC Technical Assistance Center
(ATAC) at 00.800.9999.3822
33 (0)1 30 87 53 00Telephone:
Document Number 62-2204-01 rev B
Copyright Advanced Digital Information Corporation, 1999
FastStor 22
Quick Start
Guide
FastStor
For summary of common operations
consult the label
inside the FastStor 22 door.
KEYPAD OPERATIONS
Selected Indicators and Controls
DC DC on LCD indicates compression
mode.
WP WP on LCD indicates write-
protected tape.
CT CT on LCD indicates cleaning
tape loaded or drive cleaning
required.
LCD
LEDs
ALARM LED indicates error
condition.
ACTIVITY LED indicates Loader
or Drive activity.
POWER LED indicates Power
is on.
Press MODE to select operations,
or to clear error condition.
Buttons
Press SELECT to execute an
operation or to move to next menu
level.
Press NEXT/PREVIOUS to view
options within a selected mode.
FastStor
TAPE
TM

Your FastStor 22 is now ready to perform
a backup or restore operation via your
Host Computer.
Note:
The SCSI ID of the FastStor
robotics has been factory set to
1 and the drive to 3.
Install SCSI terminator.
2
Install data cartridges into front storage
slots 1-11.
6
Connect AC line cord to FastStor 22,
then to AC outlet.
1
Connect SCSI cable between host
computer and FastStor 22.
.
3
Install additional data cartridges in slots
1-11.
12
Rear Slot Indicator LEDs will Illuminate
indicating cartridge presence.
11
Verify your backup software.
13
Press SELECT button, tapes in front
slots will be moved to rear slots 12-22.
10
Power up your Host Computer.
5
Press button. is
displayed on LCD.
SELECT SNgL LOAd
8
Press button until
displayed on LCD.
MODE LOAd SLOT is
7
Press button,
displayed on LCD.
NEXT bULK LOAd is
9
Press Power button to power up your
FastStor 22.
4
POWER
MODE
SELECT
PREVIOUS
NEXT
ALARM
ACTIVITY
POWER
ALARM
ACTIVITY
POWER
POWER
PREVIOUS
SELECT
NEXT
MODE
POWER
MODE
SELECT
PREVIOUS
ALARM
ACTIVITY
POWER
NEXT
POWER
MODE
SELECT
PREVIOUS
ALARM
ACTIVITY
POWER
NEXT