ADIC Scalar 24 Instruction Manual

Release Notes
6-00900-06 Rev A
© March 2005, ADIC®
ADIC is a registered trademark of Advanced Digital Information Corporation. Scalar is a reg-
isteredtrademakofADIC.Allotherproduct,company,or servicenamesmentionedhereinare
the property of their respective owners.
Product: ADIC Scalar® 24 Remote Management Unit (RMU) 191E.00002
Date: March 2005
Contents
Purpose of this Release
These release notes list corrections to problems that were encountered in previous releases of the Scalar
24 RMU.
Compatibility Matrix
Refer to the following tables for information on firmware compatibility with Scalar 24 RMU:
Page Topic
1 Purpose of this Release
Compatibility Matrix1
2 Resolved Issues
Documentation2
Library Firmware
Drive Firmware
LTO-1 LTO-2 LC
LTO-2 LTO-3 SDLT 320 SDLT 600
SDLT
Libraries 237A.GZ001 V82 V34
LTO
Libraries 306A.GY001 4561 4AP0 4C60 52E0
RMU Firmware SNC Firmware AMC Firmware
191E.00002 4.50.02 4.3

2© March 2005, ADIC
Resolved Issues
Problems that have been resolved in this release of the Scalar 24 RMU are as follows:
Documentation
The following documents are currently available for the Scalar 24:
Change
Request
Number Description
CR 34512 Library Operator Panel Emulation is not visible using IE with Windows XP, SP2.
CR 34638 The RMU does not supply LTO-2 vendor or model data to MIB.
CR 34777 The RMU allows the use of junk characters for a hostname.
CR 36006 The RMU to support LTO-3 and IBM3592 drives.
CR 36126 Add the ability to set additional SNMP target addresses.
CR 37479 When changing the hostname to a blank value, the new value is displayed not properly.
CR 37977 The image of Operator Panel does not always show in IE via an external network.
CR 39179 For RMU 190X all copyright strings should be changed from - 2004 to - 2005.
CR 39435 RMU Sc24 Operator Panel does not update using IE with Windows XP, SP2.
Document Number Document Title
62-2301-07 Scalar 24 Installation and Operation Guide
62-2308-03 SNC 400 User’s Guide
6-00998-03 SNC User’s Guide
6-00064-06 ADIC Management Console 4.3 User’s Guide