ADJ POW-R BAR RACK USB User manual

POW-R BAR RACK USB
USER GUIDE
©2019 ADJ PRODUCTS LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without
notice. ADJ logo and identifying product names and numbers herein are trademarks of ADJ PRODUCTS LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted. Product names used in this
document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. All non-ADJ brands and product
names are trademarks or registered trademarks of their respective companies. ADJ PRODUCTS LLC and all affiliated companies hereby disclaim any
and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with
the use or reliance of any information contained within this document, and/or as a result of the improper, unsafe, insufficient and negligent assembly,
installation, rigging, and operation of this product.
ADJ PRODUCTS LLC World Headquarters | 6122 S. Eastern Ave. | Los Angeles, CA. 90040
323-582-2650 |323-832-2941 fax | www.adj.com | [e-mail]
ADJ Products Group Mexico | AV Santa Ana 30 | Parque Industrial Lerma , Lerma, Mexico 52000
[phone]
UNPACKING This product has been thoroughly tested and has been shipped in perfect condition. Carefully check the shipping carton for damage that
may have occurred during shipping. If the carton appears to be damaged, carefully inspect your product for damage and be sure all accessories
necessary to assemble the product have arrived intact. In the event damage has been found or parts are missing, please contact our customer support
team for further instructions. Please do not return this product to your dealer without first contacting customer support at the number listed below. Please
do not discard the shipping carton in the trash. Please recycle whenever possible.
CUSTOMER SUPPORT ADJ provides a customer support line, to provide set up help and to answer any questions should you encounter problems during
your set up or initial operation. Visit us on the web at www.adj.com for any comments or suggestions. For service related issues please contact ADJ.
ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST | 800-322-6337 |Fax: [phone] | [e-mail]
LIMITED WARRANTY (USA ONLY)
A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing defects in material and
workmanship for a prescribed period from the date of purchase (see specific warranty periods below). This warranty shall be valid only if the product is
purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of
purchase by acceptable evidence, at the time service is sought.
B. For warranty service you must obtain a Return Authorization number (RA#) before sending back the product–please contact ADJ Products, LLC
Service Department at 800-322-6337. Send the product only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested
repairs or service (including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a
designated point within the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be shipped
with the product. If any accessories are shipped with the product, ADJ Products, LLC shall have no liability whatsoever for loss of or damage to any such
accessories, or for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which ADJ Products, LLC concludes,
after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory
unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because not properly maintained as set forth
in the instruction manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning or periodic checkup. During the period specified above, ADJ
Products, LLC will replace defective parts at its expense with new or refurbished parts and will absorb all expenses for warranty service and repair labor
by reason of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this warranty shall be limited to the repair of the
product, or replacement thereof, including parts, at the sole discretion of ADJ Products, LLC. All products covered by this warranty were manufactured
after August 15, 2012, and bear identifying marks to that effect.
E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products without any obligation to include these
changes in any products theretofore manufactured. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied
with products described above. Except to the extent prohibited by applicable law, all implied warranties made by ADJ Products, LLC in connection with
this product, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, whether
expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said period has expired. The consumer’s and/or
Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall ADJ Products, LLC be liable
for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product. This warranty is the only written warranty
applicable to ADJ Products, LLC Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.
LIMITED WARRANTY PERIODS
Non-LED Lighting Products = 1-Yea r (365 Days) (Including Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls,
Par Cans, Trussing, Lighting Stands, Power/Data Distribution, etc. excluding LED and lamps)
Laser Products = 1-Ye a r ( 3 65 Days) (excluding laser diodes which have a 6-Month Limited Warranty)
LED Products = 2-Ye ar ( 7 30 Da y s) (excluding batteries which have a 180 Day Limited Warranty)
NOTE: 2-Ye a r ( 7 3 0 D a ys ) L i m i t e d W a rr a n t y O N LY a p p l i es t o p r o d u c t p u rc h a s ed w i t h i n t h e United States.
StarTec Series = 1-Ye a r ( 3 6 5 D a y s ) (excluding batteries which have a 180 Day Limited Warranty)
ADJ DMX Controllers = 2 Year (730 Days)
American Audio Products = 1 Year (365 Days)
WARRANTY RETURNS
All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number
must be clearly written on the outside of the return package. A brief description of the problem as well as the R.A. number must also be written down on
a piece of paper and included in the shipping container. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Items
returned without a R.A. number clearly marked on the outside of the package will be refused and returned at customer’s expense. You may obtain a R.A.
number by contacting customer support.

FEATURES
8x Switched 120V 3-Prong Edison Sockets (rear panel)
8x Illuminated ON/OFF Rocker Switches (front panel)
2x Always Hot A/C Outlets (1 front and 1 rear)
2 USB Charging Ports (front) (Output 1: 2.1A, Output 2: 1.3A)
Resettable Circuit Breaker (front)
15A or 1,800W MAX Load
4.9 ft (1.5m) Attached Main 3-Prong Power Cord (included)
19-inch 1-Space Rack Mountable (rack screws not included)
SPECIFICATIONS
Input: AC 120V/60Hz Operation ONLY
AC Output: Total 120V/60Hz, 15A
Each Channel: MAX 120V/60Hz, 10A
Maximum Total Load 15A or 1800W
Dimensions: L 19.0” (483mm) x W 5.0” (127mm) x H 1.7” (44m)
Weight: 4 lbs. (1.8kg)
SAFETY GUIDELINES
PROTECTION CLASS 1 - FIXTURE MUST BE PROPERLY GROUNDED!
DO NOT EXCEED 10A PER CHANNEL OR DO NOT EXCEED 15A TOTAL AMPS / 1,800 WATTS!
THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS DEVICE!
DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID YOUR MANUFACTURER’S WARRANTY.
DAMAGES RESULTING FROM MODIFICATIONS TO THIS DEVICE AND/OR THE DISREGARD OF THESE SAFETY
GUIDELINES VOID THE MANUFACTURER’S WARRANTY AND ARE NOT SUBJECT TO ANY WARRANTY CLAIMS
AND/OR REPAIRS. ONLY USE ORIGINAL PACKAGING AND MATERIALS TO TRANSPORT THE DEVICE IN FOR SERVICE.
DO NOT OPERATE DEVICE IF POWER CORD IS FRAYED, CRIMPED, DAMAGED AND/OR IF ANY OF THE POWER
SOCKETS ARE DAMAGED AND/OR POWER CORDS OF DEVICES DO NOT INSERT INTO THE REAR SOCKETS
SECURELY WITH EASE. DO NOT PLUG DEVICE INTO A DIMMER PACK!
NEVER OPEN THIS DEVICE WHILE IN USE! KEEP FLAMMABLE MATERIALS AWAY FROM DEVICE!
INDOOR / DRY LOCATIONS USE ONLY!
DO NOT EXPOSE DEVICE TO RAIN AND/OR MOISTURE!
FOLLOW STEPS BELOW TO INSTALL DEVICE IN A 19-INCH RACK
1. Connect up to 8 device power cords to the 8 Channel power sockets on the rear panel.
2. Connect the attached main power cord from the device to a suitable power source.
3. Install and secure device with rack screws. (rack screws not included - see image below)
DIMENSIONAL DRAWINGS
483.00 mm
44.00 mm
127.00 mm
*DRAWINGS NOT TO SCALE
5014475