ADLINK Technology cBP-3210PR User manual

cBP-3210PR
3U 10-slot cPCI PlusIO Hybrid Backplane
Quick Reference Guide
Manual Revision: 1.00
Revision Date: September 29, 2014
Part Number: 50-1Z163-1000
Advance Technologies;Automate the World.

2
©Copyright 2014 ADLINK Technology Inc.
All Rights Reserved.
The information in this document is subject to change without prior notice in order to improve reliability,
design and function and does not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages
arising out of the use or inability to use the product or documentation, even if advised of the possibility of
such damages.
This document contains proprietary information protected by copyright. All rights are reserved. No part of this
manual may be reproduced by any mechanical, electronic, or other means in any form without prior written
permission of the manufacturer.
Trademarks
Product names mentioned herein are used for identification purposes only and may be trademarks and/or
registered trademarks of their respective companies.

3
cBP-3210PR Backplane
The cBP-3210PR is a 3U CompactPCI PlusIO hybrid 32-bit backplane with rear I/O.
Specifications
•Standard CompactPCI height for 3U cPCI cards
•CompactPCI Compliancy
oPICMG 2.0 CompactPCI core specification R3.0
oPICMG 2.30 CompactPCI PlusIO
oPICMG S.0 CompactPCI Serial
•Dimensions: 224.06 x 128.7 (mm, W x H)
•PCI Bus Clock: 32-bit/33MHz
•cPCI System Slot: one R-hand side
•cPCI System Slot Rear I/O: None
•cPCI Peripheral Slots: 5
•cPCI Peripheral Slots Rear I/O: P2 rear I/O with AB-type shroud
•cPCI Serial Peripheral Slots: 4
oSupports four PCIe x 1, four SATA/SAS, four USB 2.0 and two GbE
•Power Connectors: ATX connector x2 and M3 type connectors.
•V (I/O): 3.3V or 5V selectable, default 5V
•Other Connectors: INH#, Reset, PWR_FAL# and Voltage LEDs

4
Architecture
PICMG
2.0
Periph.
R(I/O)
PICMG
2.0
Periph.
R(I/O)
PICMG
2.0
Periph.
R(I/O)
PICMG
2.0
Periph.
R(I/O)
PICMG
2.0
Periph.
R(I/O)
PICM
G
2.0
PICMG
2.30
System
Slot
PICMG
cPCI-
S.0
Periph.
PICMG
cPCI-
S.0
Periph.
PICMG
cPCI-
S.0
Periph.
PICMG
cPCI-
S.0
Periph.
cPCI Serial Connector
cPCI Serial Connector
Legacy cPCI P2 (Rear I/O) Connector
Legacy cPCI P1 Connector
GbE
PCIe x1
SAT
A
/SAS
USB 2.0
cPCI Serial Slots
PICMG
2.30 P2

5
Mechanical Drawings
128.7
224.06
P12 P10
P12 P10
P13P15P17P18
P8 P6 P4 P2
P11 P9 P7 P5 P3 P1
CN1 CN2
CN8
CN4
CN3
CN6
CN5
CN7
JP1
rP4 rP6 rP8 rP10 rP12
cBP-3210PR Front View
cBP-3210PR Rea
r
View

6
Pin Assignments
3U cPCI System Slot 1 (P1 & P2)
Pin Z A B C D E F Conn
1 GND +5V -12V TRST +12V +5V GND
2 GND TCK +5V TMS TDO TDI GND
3 GND INTA# INTB# INTC# +5V INTD# GND
4 GND IPMB_PWR HEALTHY# VIO INTP INTS GND
5 GND BRSVP1A5 BRSVP1B5 RST# GND GNT0# GND
6 GND REQ0# GND +3.3V CLK0 AD[31] GND
7 GND AD[30] AD[29] AD[28] GND AD[27] GND
8 GND AD[26] GND VIO AD[25] AD[24] GND
9 GND C/BE[3]# GND AD[23] GND AD[22] GND
10 GND AD[21] GND +3.3V AD[20] AD[19] GND
11 GND AD[18] AD[17] AD[16] GND C/BE[2]# GND
12-14 KEY AREA
15 GND +3.3V FRAME# IRDY# GND TRDY# GND
16 GND DEVSEL# GND VIO STOP# LOCK# GND
17 GND +3.3V IPMB_SCL IPMB_SDA GND PERR# GND
18 GND SERR# GND +3.3V PAR C/BE[1]# GND
19 GND +3.3V AD[15] AD[14] GND AD[13] GND
20 GND AD[12] GND VIO AD[11] AD[10] GND
21 GND +3.3V AD[9] AD[8] M66EN C/BE[0]# GND
22 GND AD[7] GND +3.3V AD[6] AD[5] GND
23 GND +3.3V AD[4] AD[3] +5V AD[2] GND
24 GND AD[1] +5V VIO AD[0] ACK64# GND
25 GND +5V REQ64# ENUM# +3.3V +5V GND
P1
Pin Z A B C D E F Conn
1 GND CLK1 GND REQ1# GNT1# REQ2# GND
2 GND CLK2 CLK3 SYSEN# GNT2# REQ3# GND
3 GND CLK4 GND GNT3# REQ4# GNT4# GND
4 GND VIO 1_PE_Tx00- 1_USB2- 1_SATA_Tx- reserved GND
5 GND 1_PE_Rx00- 1_PE_Tx00+ 1_USB2+ 1_SATA_Tx+ 1_SATA_Rx- GND
6 GND 1_PE_Rx00+ 2_PE_Tx00- 2_USB2- 2_SATA_Tx- 1_SATA_Rx+ GND
7 GND 2_PE_Rx00- 2_PE_Tx00+ 2_USB2+ 2_SATA_Tx+ 2_SATA_Rx- GND
8 GND 2_PE_Rx00+ 3_PE_Tx00- 3_USB2- 3_SATA_Tx- 2_SATA_Rx+ GND
9 GND 3_PE_Rx00- 3_PE_Tx00+ 3_USB2+ 3_SATA_Tx+ 3_SATA_Rx- GND
10 GND 3_PE_Rx00+ 4_PE_Tx00- 4_USB2- 4_SATA_Tx- 3_SATA_Rx+ GND
11 GND 4_PE_Rx00- 4_PE_Tx00+ 4_USB2+ 4_SATA_Tx+ 4_SATA_Rx- GND
12 GND 4_PE_Rx00+ 1_PE_CLKE# 2_PE_CLKE# SATA_SDI 4_SATA_Rx+ GND
13 GND 3_PE_CLK+ 1_PE_CLK- 3_PE_CLKE# SATA_SDO SATA_SL GND
14 GND 3_PE_CLK- 1_PE_CLK+ 4_PE_CLKE# SATA_SCL reserved GND
15 GND 4_PE_CLK+ 2_PE_CLK- NC NC NC GND
16 GND 4_PE_CLK- 2_PE_CLK+ NC GND reserved GND
17 GND 2_ETH_D- 2_ETH_C- PRST# NC NC GND
18 GND 2_ETH_D+ 2_ETH_C+ 2_ETH_A 1_ETH_C- 1_ETH_A- GND
19 GND GND GND 2_ETH_A+ 1_ETH_C+ 1_ETH_A+ GND
20 GND NC GND 2_ETH_B- 1_ETH_D- 1_ETH_B- GND
21 GND NC GND 2_ETH_B+ 1_ETH_D+ 1_ETH_B+ GND
22 GND GA4 GA3 NC GA1 GA0 GND
P2

7
3U cPCI Peripheral Slot 1 (P3 & P4)
Pin Z A B C D E F Conn
1 GND +5V -12V TRST +12V +5V GND
2 GND TCK +5V TMS TDO TDI GND
3 GND INTD# INTA# INTB# +5V INTC# GND
4 GND IPMB_PWR HEALTHY# VIO INTP INTS GND
5 GND BRSVP1A5 BRSVP1B5 RST# GND GNT0# GND
6 GND REQ0# GND +3.3V CLK0 AD[31] GND
7 GND AD[30] AD[29] AD[28] GND AD[27] GND
8 GND AD[26] GND VIO AD[25] AD[24] GND
9 GND C/BE[3]# IDSEL AD[23] GND AD[22] GND
10 GND AD[21] GND +3.3V AD[20] AD[19] GND
11 GND AD[18] AD[17] AD[16] GND C/BE[2]# GND
12-14 KEY AREA
15 GND +3.3V FRAME# IRDY# GND TRDY# GND
16 GND DEVSEL# GND VIO STOP# LOCK# GND
17 GND +3.3V IPMB_SCL IPMB_SDA GND PERR# GND
18 GND SERR# GND +3.3V PAR C/BE[1]# GND
19 GND +3.3V AD[15] AD[14] GND AD[13] GND
20 GND AD[12] GND VIO AD[11] AD[10] GND
21 GND +3.3V AD[9] AD[8] M66EN C/BE[0]# GND
22 GND AD[7] GND +3.3V AD[6] AD[5] GND
23 GND +3.3V AD[4] AD[3] +5V AD[2] GND
24 GND AD[1] +5V VIO AD[0] ACK64# GND
25 GND +5V REQ64# ENUM# +3.3V +5V GND
P3
Pin Z A B C D E F Conn
1 GND NC NC NC NC NC GND
2 GND NC NC NC NC NC GND
3 GND NC NC NC NC NC GND
4 GND NC NC NC NC NC GND
5 GND NC NC NC NC NC GND
6 GND NC NC NC NC NC GND
7 GND NC NC NC NC NC GND
8 GND NC NC NC NC NC GND
9 GND NC NC NC NC NC GND
10 GND NC NC NC NC NC GND
11 GND NC NC NC NC NC GND
12 GND NC NC NC NC NC GND
13 GND NC NC NC NC NC GND
14 GND NC NC NC NC NC GND
15 GND NC NC NC NC NC GND
16 GND NC NC NC NC NC GND
17 GND NC NC NC NC NC GND
18 GND NC NC NC NC NC GND
19 GND NC NC NC NC NC GND
20 GND NC NC NC NC NC GND
21 GND NC NC NC NC NC GND
22 GND GND GND GND NC GND GND
P4

8
3U cPCI Peripheral Slot 2 (P5 & P6)
Pin Z A B C D E F Conn
1 GND +5V -12V TRST +12V +5V GND
2 GND TCK +5V TMS TDO TDI GND
3 GND INTC# INTD# INTA# +5V INTB# GND
4 GND IPMB_PWR HEALTHY# VIO INTP INTS GND
5 GND BRSVP1A5 BRSVP1B5 RST# GND GNT1# GND
6 GND REQ1# GND +3.3V CLK1 AD[31] GND
7 GND AD[30] AD[29] AD[28] GND AD[27] GND
8 GND AD[26] GND VIO AD[25] AD[24] GND
9 GND C/BE[3]# IDSEL AD[23] GND AD[22] GND
10 GND AD[21] GND +3.3V AD[20] AD[19] GND
11 GND AD[18] AD[17] AD[16] GND C/BE[2]# GND
12-14 KEY AREA
15 GND +3.3V FRAME# IRDY# GND TRDY# GND
16 GND DEVSEL# GND VIO STOP# LOCK# GND
17 GND +3.3V IPMB_SCL IPMB_SDA GND PERR# GND
18 GND SERR# GND +3.3V PAR C/BE[1]# GND
19 GND +3.3V AD[15] AD[14] GND AD[13] GND
20 GND AD[12] GND VIO AD[11] AD[10] GND
21 GND +3.3V AD[9] AD[8] M66EN C/BE[0]# GND
22 GND AD[7] GND +3.3V AD[6] AD[5] GND
23 GND +3.3V AD[4] AD[3] +5V AD[2] GND
24 GND AD[1] +5V VIO AD[0] ACK64# GND
25 GND +5V REQ64# ENUM# +3.3V +5V GND
P5
Pin Z A B C D E F Conn
1 GND NC NC NC NC NC GND
2 GND NC NC NC NC NC GND
3 GND NC NC NC NC NC GND
4 GND NC NC NC NC NC GND
5 GND NC NC NC NC NC GND
6 GND NC NC NC NC NC GND
7 GND NC NC NC NC NC GND
8 GND NC NC NC NC NC GND
9 GND NC NC NC NC NC GND
10 GND NC NC NC NC NC GND
11 GND NC NC NC NC NC GND
12 GND NC NC NC NC NC GND
13 GND NC NC NC NC NC GND
14 GND NC NC NC NC NC GND
15 GND NC NC NC NC NC GND
16 GND NC NC NC NC NC GND
17 GND NC NC NC NC NC GND
18 GND NC NC NC NC NC GND
19 GND NC NC NC NC NC GND
20 GND NC NC NC NC NC GND
21 GND NC NC NC NC NC GND
22 GND GND GND GND NC NC GND
P6

9
3U cPCI Peripheral Slot 3 (P7 & P8)
Pin Z A B C D E F Conn
1 GND +5V -12V TRST +12V +5V GND
2 GND TCK +5V TMS TDO TDI GND
3 GND INTB# INTC# INTD# +5V INTA# GND
4 GND IPMB_PWR HEALTHY# VIO INTP INTS GND
5 GND BRSVP1A5 BRSVP1B5 RST# GND GNT2# GND
6 GND REQ2# GND +3.3V CLK2 AD[31] GND
7 GND AD[30] AD[29] AD[28] GND AD[27] GND
8 GND AD[26] GND VIO AD[25] AD[24] GND
9 GND C/BE[3]# IDSEL AD[23] GND AD[22] GND
10 GND AD[21] GND +3.3V AD[20] AD[19] GND
11 GND AD[18] AD[17] AD[16] GND C/BE[2]# GND
12-14 KEY AREA
15 GND +3.3V FRAME# IRDY# GND TRDY# GND
16 GND DEVSEL# GND VIO STOP# LOCK# GND
17 GND +3.3V IPMB_SCL IPMB_SDA GND PERR# GND
18 GND SERR# GND +3.3V PAR C/BE[1]# GND
19 GND +3.3V AD[15] AD[14] GND AD[13] GND
20 GND AD[12] GND VIO AD[11] AD[10] GND
21 GND +3.3V AD[9] AD[8] M66EN C/BE[0]# GND
22 GND AD[7] GND +3.3V AD[6] AD[5] GND
23 GND +3.3V AD[4] AD[3] +5V AD[2] GND
24 GND AD[1] +5V VIO AD[0] ACK64# GND
25 GND +5V REQ64# ENUM# +3.3V +5V GND
P7
Pin Z A B C D E F Conn
1 GND NC NC NC NC NC GND
2 GND NC NC NC NC NC GND
3 GND NC NC NC NC NC GND
4 GND NC NC NC NC NC GND
5 GND NC NC NC NC NC GND
6 GND NC NC NC NC NC GND
7 GND NC NC NC NC NC GND
8 GND NC NC NC NC NC GND
9 GND NC NC NC NC NC GND
10 GND NC NC NC NC NC GND
11 GND NC NC NC NC NC GND
12 GND NC NC NC NC NC GND
13 GND NC NC NC NC NC GND
14 GND NC NC NC NC NC GND
15 GND NC NC NC NC NC GND
16 GND NC NC NC NC NC GND
17 GND NC NC NC NC NC GND
18 GND NC NC NC NC NC GND
19 GND NC NC NC NC NC GND
20 GND NC NC NC NC NC GND
21 GND NC NC NC NC NC GND
22 GND GND GND NC GND GND GND
P8

10
3U cPCI Peripheral Slot 4 (P9 & P10)
Pin Z A B C D E F Conn
1 GND +5V -12V TRST +12V +5V GND
2 GND TCK +5V TMS TDO TDI GND
3 GND INTA# INTB# INTC# +5V INTD# GND
4 GND IPMB_PWR HEALTHY# VIO INTP INTS GND
5 GND BRSVP1A5 BRSVP1B5 RST# GND GNT3# GND
6 GND REQ3# GND +3.3V CLK3 AD[31] GND
7 GND AD[30] AD[29] AD[28] GND AD[27] GND
8 GND AD[26] GND VIO AD[25] AD[24] GND
9 GND C/BE[3]# IDSEL AD[23] GND AD[22] GND
10 GND AD[21] GND +3.3V AD[20] AD[19] GND
11 GND AD[18] AD[17] AD[16] GND C/BE[2]# GND
12-14 KEY AREA
15 GND +3.3V FRAME# IRDY# GND TRDY# GND
16 GND DEVSEL# GND VIO STOP# LOCK# GND
17 GND +3.3V IPMB_SCL IPMB_SDA GND PERR# GND
18 GND SERR# GND +3.3V PAR C/BE[1]# GND
19 GND +3.3V AD[15] AD[14] GND AD[13] GND
20 GND AD[12] GND VIO AD[11] AD[10] GND
21 GND +3.3V AD[9] AD[8] M66EN C/BE[0]# GND
22 GND AD[7] GND +3.3V AD[6] AD[5] GND
23 GND +3.3V AD[4] AD[3] +5V AD[2] GND
24 GND AD[1] +5V VIO AD[0] ACK64# GND
25 GND +5V REQ64# ENUM# +3.3V +5V GND
P9
Pin Z A B C D E F Conn
1 GND NC NC NC NC NC GND
2 GND NC NC NC NC NC GND
3 GND NC NC NC NC NC GND
4 GND NC NC NC NC NC GND
5 GND NC NC NC NC NC GND
6 GND NC NC NC NC NC GND
7 GND NC NC NC NC NC GND
8 GND NC NC NC NC NC GND
9 GND NC NC NC NC NC GND
10 GND NC NC NC NC NC GND
11 GND NC NC NC NC NC GND
12 GND NC NC NC NC NC GND
13 GND NC NC NC NC NC GND
14 GND NC NC NC NC NC GND
15 GND NC NC NC NC NC GND
16 GND NC NC NC NC NC GND
17 GND NC NC NC NC NC GND
18 GND NC NC NC NC NC GND
19 GND NC NC NC NC NC GND
20 GND NC NC NC NC NC GND
21 GND NC NC NC NC NC GND
22 GND GND GND NC GND NC GND
P10

11
3U cPCI Peripheral Slot 5 (P11 & P12)
Pin Z A B C D E F Conn
1 GND +5V -12V TRST +12V +5V GND
2 GND TCK +5V TMS TDO TDI GND
3 GND INTD# INTA# INTB# +5V INTC# GND
4 GND IPMB_PWR HEALTHY# VIO INTP INTS GND
5 GND BRSVP1A5 BRSVP1B5 RST# GND GNT4# GND
6 GND REQ4# GND +3.3V CLK4 AD[31] GND
7 GND AD[30] AD[29] AD[28] GND AD[27] GND
8 GND AD[26] GND VIO AD[25] AD[24] GND
9 GND C/BE[3]# IDSEL AD[23] GND AD[22] GND
10 GND AD[21] GND +3.3V AD[20] AD[19] GND
11 GND AD[18] AD[17] AD[16] GND C/BE[2]# GND
12-14 KEY AREA
15 GND +3.3V FRAME# IRDY# GND TRDY# GND
16 GND DEVSEL# GND VIO STOP# LOCK# GND
17 GND +3.3V IPMB_SCL IPMB_SDA GND PERR# GND
18 GND SERR# GND +3.3V PAR C/BE[1]# GND
19 GND +3.3V AD[15] AD[14] GND AD[13] GND
20 GND AD[12] GND VIO AD[11] AD[10] GND
21 GND +3.3V AD[9] AD[8] M66EN C/BE[0]# GND
22 GND AD[7] GND +3.3V AD[6] AD[5] GND
23 GND +3.3V AD[4] AD[3] +5V AD[2] GND
24 GND AD[1] +5V VIO AD[0] ACK64# GND
25 GND +5V REQ64# ENUM# +3.3V +5V GND
P11
Pin Z A B C D E F Conn
1 GND NC NC NC NC NC GND
2 GND NC NC NC NC NC GND
3 GND NC NC NC NC NC GND
4 GND NC NC NC NC NC GND
5 GND NC NC NC NC NC GND
6 GND NC NC NC NC NC GND
7 GND NC NC NC NC NC GND
8 GND NC NC NC NC NC GND
9 GND NC NC NC NC NC GND
10 GND NC NC NC NC NC GND
11 GND NC NC NC NC NC GND
12 GND NC NC NC NC NC GND
13 GND NC NC NC NC NC GND
14 GND NC NC NC NC NC GND
15 GND NC NC NC NC NC GND
16 GND NC NC NC NC NC GND
17 GND NC NC NC NC NC GND
18 GND NC NC NC NC NC GND
19 GND NC NC NC NC NC GND
20 GND NC NC NC NC NC GND
21 GND NC NC NC NC NC GND
22 GND GND GND NC NC GND GND
P12

12
Peripheral Serial Slot 1 (P13 & P14)
Pin A B C D E F Conn
1-1 +12V STANDBY GND +12V +12V GND
1-2 GND I²C_SCL I²C_SDA GND reserved reserved
1-3 NC NC GA0 NC NC NC
1-4 GND 1_USB2+ 1_USB2- GND PE_CLKIN+ PE_CLKIN-
1-5 1_PE_Tx00+ 1_PE_Tx00- GND 1_PE_Rx00+ 1_PE_Rx00- GND
1-6 GND NC NC GND NC NC
P13
6-1 1_ETH_A+ 1_ETH_A- GND 1_ETH_B+ 1_ETH_B- GND
6-2 GND 2_ETH_A+ 2_ETH_A- GND 2_ETH_B+ 2_ETH_B-
6-3 NC NC GND NC NC GND
6-4 GND NC NC GND NC NC
6-5 NC NC GND NC NC GND
6-6 GND NC NC GND NC NC
6-7 NC NC GND NC NC GND
6-8 GND NC NC GND NC NC
P14
Pin G H I J K L Conn
1-1 +12V +12V GND +12V +12V GND
1-2 GND RST# NC GND PCIE_EN# NC
1-3 SATA_SDI SATA_SDO GA2 SATA_SCL SATA_SL GA3
1-4 GND 1_SATA_Tx+ 1_SATA_Tx- GND 1_SATA_Rx+ 1_SATA_Rx-
1-5 NC NC GND NC NC GND
1-6 GND NC NC GND NC NC
P13
6-1 1_ETH_C+ 1_ETH_C- GND 1_ETH_D+ 1_ETH_D- GND
6-2 GND 2_ETH_C+ 2_ETH_C- GND 2_ETH_D+ 2_ETH_D-
6-3 NC NC GND NC NC GND
6-4 GND NC NC GND NC NC
6-5 NC NC GND NC NC GND
6-6 GND NC NC GND NC NC
6-7 NC NC GND NC NC GND
6-8 GND NC NC GND NC NC
P14

13
Peripheral Serial Slot 2 (P15 & P16)
Pin A B C D E F Conn
1-1 +12V STANDBY GND +12V +12V GND
1-2 GND I²C_SCL I²C_SDA GND reserved reserved
1-3 NC NC NC NC NC GA1
1-4 GND 1_USB2+ 1_USB2- GND PE_CLKIN+ PE_CLKIN-
1-5 1_PE_Tx00+ 1_PE_Tx00- GND 1_PE_Rx00+ 1_PE_Rx00- GND
1-6 GND NC NC GND NC NC
P15
6-1 1_ETH_A+ 1_ETH_A- GND 1_ETH_B+ 1_ETH_B- GND
6-2 GND NC NC GND NC NC
6-3 NC NC GND NC NC GND
6-4 GND NC NC GND NC NC
6-5 NC NC GND NC NC GND
6-6 GND NC NC GND NC NC
6-7 NC NC GND NC NC GND
6-8 GND 8_ETH_A+ 8_ETH_A- GND 8_ETH_B+ 8_ETH_B-
P16
Pin G H I J K L Conn
1-1 +12V +12V GND +12V +12V GND
1-2 GND RST# NC GND PCIE_EN# NC
1-3 SATA_SDI SATA_SDO GA2 SATA_SCL SATA_SL GA3
1-4 GND 2_SATA_Tx+ 2_SATA_Tx- GND 2_SATA_Rx+ 2_SATA_Rx-
1-5 NC NC GND NC NC GND
1-6 GND NC NC GND NC NC
P15
6-1 1_ETH_C+ 1_ETH_C- GND 1_ETH_D+ 1_ETH_D- GND
6-2 GND NC NC GND NC NC
6-3 NC NC GND NC NC GND
6-4 GND NC NC GND NC NC
6-5 NC NC GND NC NC GND
6-6 GND NC NC GND NC NC
6-7 NC NC GND NC NC GND
6-8 GND 8_ETH_C+ 8_ETH_C- GND 8_ETH_D+ 8_ETH_D-
P16

14
Peripheral Serial Slot 3 (P17)
Pin A B C D E F Conn
1-1 +12V STANDBY GND +12V +12V GND
1-2 GND I²C_SCL I²C_SDA GND reserved reserved
1-3 NC NC GA0 NC NC NC
1-4 GND 1_USB2+ 1_USB2- GND PE_CLKIN+ PE_CLKIN-
1-5 1_PE_Tx00+ 1_PE_Tx00- GND 1_PE_Rx00+ 1_PE_Rx00- GND
1-6 GND NC NC GND NC NC
P17
Pin G H I J K L Conn
1-1 +12V +12V GND +12V +12V GND
1-2 GND RST# NC GND PCIE_EN# NC
1-3 SATA_SDI SATA_SDO GA2 SATA_SCL SATA_SL GA3
1-4 GND 3_SATA_Tx+ 3_SATA_Tx- GND 3_SATA_Rx+ 3_SATA_Rx-
1-5 NC NC GND NC NC GND
1-6 GND NC NC GND NC NC
P17
Peripheral Serial Slot 4 (P18)
Pin A B C D E F Conn
1-1 +12V STANDBY GND +12V +12V GND
1-2 GND I²C_SCL I²C_SDA GND reserved reserved
1-3 NC NC GA0 NC NC NC
1-4 GND 1_USB2+ 1_USB2- GND PE_CLKIN+ PE_CLKIN-
1-5 1_PE_Tx00+ 1_PE_Tx00- GND 1_PE_Rx00+ 1_PE_Rx00- GND
1-6 GND NC NC GND NC NC
P18
Pin G H I J K L Conn
1-1 +12V +12V GND +12V +12V GND
1-2 GND RST# NC GND PCIE_EN# NC
1-3 SATA_SDI SATA_SDO GA2 SATA_SCL SATA_SL GA3
1-4 GND 4_SATA_Tx+ 4_SATA_Tx- GND 4_SATA_Rx+ 4_SATA_Rx-
1-5 NC NC GND NC NC GND
1-6 GND NC NC GND NC NC
P18

15
PRST# Connector (CN1) - Reset System Slot blade
Pin Signal
1 PRST#
2 GND
INH# Connector (CN2) - “ON/OFF” switch
Pin Signal
1 INH#
2 GND
IPMB Connector (CN3) - Intelligent Platform Management Bus
Pin Signal
1 IPMB_SDA
2 GND
3 IPMB_SCL
4 IPMB_PWR
5 N/A
6 GND
7 GND
V(I/O) Power +5V Selectable Connector (CN4)
V(I/O) Power +3.3V Selectable Connector (CN5)
V(I/O) Power Selectable Connector (CN6)

16
ATX 20-pin Connector (CN7)
Pin Signal Pin Signal
1 +3.3V 11 +3.3V
2 +3.3V 12 -12V
3 GND 13 GND
4 +5V 14 INH#
5 GND 15 GND
6 +5V 16 GND
7 GND 17 GND
8 NC 18 NC
9 +5V_SB 19 +5V
10 +12V 20 +5V
ATX 24-pin Connector (CN8)
Pin Signal Pin Signal
1 +3.3V 13 +3.3V
2 +3.3V 14 -12V
3 GND 15 GND
4 +5V 16 INH#
5 GND 17 GND
6 +5V 18 GND
7 GND 19 GND
8 NC 20 NC
9 +5V_SB 21 +5V
10 +12V 22 +5V
11 +12V 23 +5V
12 +3.3V 24 GND
PWR LED (JP1) - Power LED header for +12V, -12V, +5V and +3.3V
Pin Signal Pin Signal
1 +12V 2 GND
3 -12V 4 GND
5 +5V 6 GND
7 +3.3V 8 GND

17
Important Safety Instructions
Read and follow all instructions marked on the product and in the documentation before you operate your system. Retain
all safety and operating instructions for future use.
zPlease read these safety instructions carefully.
zPlease keep this User‘s Manual for later reference.
zThe equipment should be operated only from the type of power source indicated on the rating label. Make sure the
voltage of the power source when connect the equipment to the power outlet.
zIf your equipment has a voltage selector switch, make sure that the switch is in the proper position for your area.
The voltage selector switch is set at the factory to the correct voltage.
zFor pluggable equipment, that the socket-outlet shall be installed near the equipment and shall be easily accessible.
zPlace the power cord such a way that people can not step on it. Do not place anything over the power cord.
zIf the equipment is not use for long time, disconnect the equipment from mains to avoid being damaged by
transient overvoltage.
zAll cautions and warnings on the equipment should be noted.
zPlease keep this equipment from humidity.
zDo not use this equipment near water or a heat source.
zLay this equipment on a reliable surface when install. A drop or fall could cause injury.
zNever pour any liquid into opening; this could cause fire or electrical shock.
zOpenings in the case are provided for ventilation. Do not block or cover these openings. Make sure you provide
adequate space around the system for ventilation when you set up your work area. Never insert objects of any kind
into the ventilation openings.
zTo avoid electrical shock, always unplug all power cables and modem cables from the wall outlets before removing
covers.
zIf one of the following situations arises, get the equipment checked by a service personnel:
A. The power cord or plug is damaged.
B. Liquid has penetrated into the equipment.
C. The equipment has been exposed to moisture.
D. The equipment has not work well or you can not get it work according to user‘s manual.
E. The equipment has dropped and damaged.
F. If the equipment has obvious sign of breakage.