ADS Technologies INSTANTHDTV PCI PTV380 - HARDWARE GUIDE 1 Installation instructions

Analogcabletuner
HDTVtuner
IR Receiver
Instant HDTV PCI
Instant HDTV PCI Hardware Installation:
1) Insert your Instant HDTV PCI into an open PCI slot on your motherboard.
2) Connect the Coaxial cable or Audio/Video cables from your video source to the Instant HDTV PCI.
3) Insert the Instant HDTV PCI CD into your CD-ROM drive.
Step by Step Hardware Installation
1. Turn your computer off. 4. Insert the Instant HDTV PCI into
an open PCI slot on the motherboard
and screw in tightly.
2. Take the case off of your computer to
have access to the PCI slot of your
motherboard.
5. Put the case of your computer back on.
3. Take the Instant HDTV PCI
from the packaging.
6. Press the power button to turn the
computer on to start the installation of
the drivers.
InstantHDTV PCI
HDTV ATSC TUNER EPG REMOTE
• •
English
PTV-380-526
Receive Free Over the Air HDTV Broadcasts on your PC
2. Insert the Instant HDTV PCI Installation CD
into the CD-ROM Drive
3. Click "No, not at this time and then Next >
4. Click "Install the software automatically
(Recommended) and then Next >
1. The Found New Hardware Wizard will appear
Step by Step Drivers Installation
5. Click on Finish to complete the driver installation
6. Check within the Device Manager under "Sound,
video and game controllers" to ensure that "ADS
Instant HDTV PCI" is listed.