ADTRAN T3SU 300 User manual

T3SU 300 User Manual
61202217L1-1B
June 2004
1202217L1 DC Version Including AC Mains Power Supply
1200218L1 HSSI DTE Interface Card
1200219L1 V.35 DTE Interface Card
1200284L1 Quad DSX-1 Interface Card
1200655L1 Quad Bridge Module
1202217L2 AC Version
1202217L4 DC Version

2 T3SU 300 User Manual 61202217L1-1B
Trademark Information:
OpenView is a trademark of Hewlett-Packard Company.
Spectrum is a registered trademark of Cabletron.
Netview is a registered trademark of IBM.
901 Explorer Boulevard
P.O. Box 140000
Huntsville, AL 35814-4000
[phone]
© 2004 ADTRAN, Inc.
All Rights Reserved.
Printed in U.S.A.

61202217L1-1B T3SU 300 User Manual 3
About this Manual
This manual is arranged so you can quickly and easily find the information you need.
The following is an overview of the contents of this manual:
• Chapter 1, Introduction, familiarizes you with fiber networks and T3SU 300
highlights and gives a brief explanation of the option cards that may be purchased
for use with the T3SU 300.
• Chapter 2, Installation and Operation, describes the T3SU 300 connectors (pin
assignments are given in Appendix A), provides installation instructions, and
explains how to operate your T3SU 300 using the terminal interface.
• Chapter 3, Configuration, explains how to access the T3SU 300 Configuration
menu, describes selections made in the Configuration menus, and provides a
menu tree of Configuration options.
• Chapter 4, Status, describes each field of the Status menu.
• Chapter 5, Statistics, explains how to access statistical information for the T3SU
300 and describes each field.
• Chapter 6, Diagnostics, explains how to diagnose problems using loopback and
BERT tests.
• Appendix A provides pinouts for the T3SU 300 connectors.
• Appendix B contains product specifications.
• Appendix C lists the acronyms and abbreviations used in this document.
• Appendix D is a glossary.

4 T3SU 300 User Manual 61202217L1-1B
Safety Instructions
When using your telephone equipment, please follow these basic safety precautions
to reduce the risk of fire, electrical shock, or personal injury:
1. Do not use this product near water, such as a bathtub, wash bowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
2. Avoid using a telephone (other than a cordless-type) during an electrical storm.
There is a remote risk of shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord, power supply, and/or batteries indicated in the manual.
Do not dispose of batteries in a fire. They may explode. Check with local codes for
special disposal instructions.
Save These Important Safety Instructions
Notes provide additional useful information.
Cautions signify information that could prevent service interruption.
Warnings provide information that could prevent damage to the
equipment or endangerment to human life.

61202217L1-1B T3SU 300 User Manual 5
Affidavit Requirements for Connection to Digital Services
• An affidavit is required to be given to the telephone company whenever digital
terminal equipment without encoded analog content and billing protection is used
to transmit digital signals containing encoded analog content which are intended
for eventual conversion into voiceband analog signals and transmitted on the
network.
• The affidavit shall affirm that either no encoded analog content or billing
information is being transmitted or that the output of the device meets Part 68
encoded analog content or billing protection specifications.
• End user/customer will be responsible for filing an affidavit with the local
exchangecarrierwhenconnectingunprotectedcustomerpremiseequipment(CPE)
to 1.544 Mbps or subrate digital services.
Until such time as subrate digital terminal equipment is registered for voice
applications, the affidavit requirement for subrate services is waived.

6 T3SU 300 User Manual 61202217L1-1B
Affidavit for Connection of Customer Premises Equipment
to 1.544 Mbps and/or Subrate Digital Services
For the work to be performed in the certified territory of ___________________
(telco name)
State of ________________
County of ________________
I, _______________________ (name), ____________________________________
(business address),
____________________ (telephone number) being duly sworn, state:
I have responsibility for the operation and maintenance of the terminal
equipment to be connected to 1.544 Mbps and/or ________ subrate digital
services. The terminal equipment to be connected complies with Part 68 of the
FCC rules except for the encoded analog content and billing protection
specifications. With respect to encoded analog content and billing protection:
( ) I attest that all operations associated with the establishment, maintenance, and
adjustment of the digital CPE with respect to analog content and encoded billing
protection information continuously complies with Part 68 of the FCC Rules and
Regulations.
( ) The digital CPE does not transmit digital signals containing encoded analog
content or billing information which is intended to be decoded within the
telecommunications network.
( ) The encoded analog content and billing protection is factory set and is not under
the control of the customer.
I attest that the operator(s)/maintainer(s) of the digital CPE responsible for the
establishment, maintenance, and adjustment of the encoded analog content and
billing information has (have) been trained to perform these functions by
successfully having completed one of the following (check appropriate blocks):

61202217L1-1B T3SU 300 User Manual 7
( ) A training course provided by the manufacturer/grantee of the equipment used to
encode analog signals; or
( ) A training course provided by the customer or authorized representative, using
training materials and instructions provided by the manufacturer/grantee of the
equipment used to encode analog signals; or
( ) An independent training course (e.g., trade school or technical institution)
recognized by the manufacturer/grantee of the equipment used to encode analog
signals; or
( ) In lieu of the preceding training requirements, the operator(s)/maintainer(s) is
(are) under the control of a supervisor trained in accordance with _________
(circle one) above.
I agree to provide ______________________ (telco’s name) with proper
documentation to demonstrate compliance with the information as provided in
the preceding paragraph, if so requested.
_________________________________Signature
_________________________________Title
_________________________________ Date
Transcribed and sworn to before me
This ________ day of _______________, _______
_________________________________
Notary Public
My commission expires:
_________________________________

8 T3SU 300 User Manual 61202217L1-1B
FCC regulations require that the following information be provided in this manual:
1. This equipment complies with Part 68 of FCC rules. On the back of the equipment
housing is a label showing the FCC registration number and ringer equivalence
number (REN). If requested, provide this information to the telephone company.
2. If this equipment causes harm to the telephone network, the telephone company
may temporarily discontinue service. If possible, advance notification is given;
otherwise, notification is given as soon as possible. The telephone company will
advise the customer of the right to file a complaint with the FCC.
3. The telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the proper operation of this
equipment. Advance notification and the opportunity to maintain uninterrupted
service are given.
4. If experiencing difficulty with this equipment, please contact ADTRAN for repair
and warranty information. The telephone company may require this equipment
to be disconnected from the network until the problem is corrected or it is certain
the equipment is not malfunctioning.
5. This unit contains no user-serviceable parts.
6. An FCC compliant telephone cord with a modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone network
or premises wiring using an FCC compatible modular jack, which is Part 68
compliant.
7. The following information may be required when applying to the local telephone
company for a dial-up line for the V.34 modem:
8. The REN is useful in determining the quantity of devices you may connect to
your telephone line and still have all of those devices ring when your number is
called. In most areas, the sum of the RENs of all devices should not exceed five. To
be certain of the number of devices you may connect to your line as determined
by the REN, call your telephone company to determine the maximum REN for
your calling area.
Service Type REN FIC USOC
1.544 Mbps - SF 04DU9-BN 6.0N RJ-48C
1.544 Mbps - SF and B8ZS 04DU9-DN 6.0N RJ-48C
1.544 Mbps - ESF 04DU9-1KN 6.0N RJ-48C
1.544 Mbps - ESF and B8ZS 04DU9-1SN 6.0N RJ-48C

61202217L1-1B T3SU 300 User Manual 9
9. This equipment may not be used on coin service provided by the telephone
company. Connection to party lines is subject to state tariffs. Contact your state
public utility commission or corporation commission for information.

10 T3SU 300 User Manual 61202217L1-1B
Federal Communications Commission Radio Frequency
Interference Statement
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio frequencies. Operation of
this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
Shielded cables must be used with this unit to ensure compliance with
Class A FCC limits.
Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.