ADTRAN T1 CSU ACE User manual

Compact T1 Network Facility Interface
Product Features
■ T1 line-conditioning and
jitter tolerance per ANSI
T1.403, T1.102 and AT&T
TR 62411
■ Supports PRI
pass through
■ Supports framed (B8ZS
or AMI) or unframed
signal formats
■ Transmits unframed
“all 1s” during signal loss
from DTE or T1 network
■ Bantam test jacks
■ Front panel status LEDs
■ 12 VDC powered
■ Desktop or wallmount
■ Industry-leading five-year
North American warranty
The ADTRAN®T1 CSU ACE™is a compact,
full-featured T1 channel service unit used to
connect T1 data terminal equipment (DTE)
and T1 facilities. The unit is designed to
provide alarms, loopbacks, signal regenera-
tion, line build out, and surge protection.
The transport signal maintains the framing
format for both the WAN and customer inter-
faces and enables ISDN PRI pass through.
The unit is suitable for wallmounting
or desktop use. Five LEDs on the front of
the unit (POWER, SYNC, NETWORK LOS,
NETWORK MANUAL and REMOTE LB,
EQ LOS, EQ MANUAL and REMOTE LB)
display the status of the unit. On the back of
the unit an eight position dip switch provides
settings for customer premises equipment
and network line build out (LBO) distances
as well as manual loopback operation. The
two network LBO switches provide four
combination settings from 0 to 22.5dB in
7.5dB increments. The three switches allotted
for the equipment LBO offer five combination
settings for PBX termination at distances up
to 655 feet. Two additional switches provide
for manual loopback (LB) in both the Equip-
ment (EQ) and Network (NET) directions.
The last switch is a spare.
The unit provides three bantam jack
pairs for testing purposes. Two pairs provide
interruptive transmit and receive access
toward the T1 network or the Data Terminal
Equipment (DTE) device. The third pair is a
non-interruptive connection for monitoring
data flowing in either direction. Two RJ-48C
modular jacks provide the network and DTE
connections. A 12 VDC wallmount power
supply that plugs into a receptacle is included
with the unit. The T1 CSU ACE also supports
wallmount applications via integrated
keyholes in the base.
For additional T1 applications, ADTRAN
provides several versions of the T1 CSU
offering various features and mounting
options. ADTRAN T1 CSU products include
the T1 ESF CSU and the rackmounted
T1 ESF CSU Smart 16 Card.
T1 CSU ACE
DSX-1
DSX-1
DSX-1
DSX-1
DSX-1
DSX-1
T1/FT1
T1/FT1
T1/FT1
Router
T1 CSU ACE
T1 CSU ACE
T1 CSU ACE
Network
PBX
PC
Host/FEP
T1/FT1
T1 CSU ACE
T1/FT1
T1 CSU ACE
T1/FT1
Dial Backup
Channel Bank
Microwave
Radio
T1 CSU ACE
T1CSUACE
NET
EQ
SYNC
PWR
LOS
MAN
LB
RMT
LB
LOS
MAN
LB
RMT
LB
T1CSUACE
NET
EQ
SYNC
PWR
LOS
MAN
LB
RMT
LB
LOS
MAN
LB
RMT
LB
T1CSUACE
NET
EQ
SYNC
PWR
LOS
MAN
LB
RMT
LB
LOS
MAN
LB
RMT
LB
T1CSUACE
NET
EQ
SYNC
PWR
LOS
MAN
LB
RMT
LB
LOS
MAN
LB
RMT
LB
T1CSUACE
NET
EQ
SYNC
PWR
LOS
MAN
LB
RMT
LB
LOS
MAN
LB
RMT
LB
T1CSUACE
NET
EQ
SYNC
PWR
LOS
MAN
LB
RMT
LB
LOS
MAN
LB
RMT
LB

T1 CSU ACE
Compact T1 Network Facility Interface
LED Indicators
■ Power
■ Sync
■ Network Loss of Signal
■ Network Manual and Remote Loopback
■ Equipment Loss of Signal
■ Equipment Manual and Remote Loopback
Mounting
■ Desktop or Wallmount
Compliance
■ FCC Part 15, Class B
■ FCC Part 68
■ Industry Canada CS03
■ UL 1950, third edition
■ CUL
Environment
Operating Temperature
■ 0° to 50°C, (32° to 122°F)
Storage Temperature
■ -20° to 70°C, (-4° to 158°F)
Relative Humidity
■ Up to 95%, non-condensing
Physical
Dimensions
■ 1.45" H, 4" D, 6.7" W
Weight
■ 12.8 oz
Power
■ 12 VDC
Product Includes
■ 115 VAC to 12 VDC power supply
■ RJ-45 cable
■ User manual
Ordering Information
Equipment Part #
T1 CSU ACE 1203022L1
12 VDC Replacement Power Supply 1903022L1
19” Rackmount Shelf for Two Units 1200412L1
Product Specifications
Network Interface
Line Rate
■ T1/FT1 (1.544 Mbps)
Physical Interface
■ RJ-48C: 8-pin modular
Specifications
■ AT&T TR62411
■ ANSI T1.403
Framing
■ D4 (SF)/ESF
Line Code
■ AMI/B8ZS
ESF Format
■ Transparent
Input Signal
■ 0 to -36dB, Auto sensitivity setting
Transmission Type
■ Regenerative transparent toward
network and toward DTE
■ Transparent mode enables PRI pass through
Equipment Interface
Electrical
■ DSX-1
Compliance
■ ANSI T1.102
Receiver Performance
■ Line build out for 0 –655 ft
Keep Alive Signal
■ Unframed all 1s on loss of signal from DTE
User Options
Option Switches
■ Network loopback
■ Equipment loopback
■ Network Line Build Out (0, 7.5, 15, 22.5dB)
■ Equipment Line Build Out (0 –133, 134–265,
266–399, 400–533, 534–655 ft)
Test Jacks
■ Interruptive test signal access network and DTE
■ Non-interruptive signal receive monitor for
network and DTE
ADTRAN, Inc.
Attn: Enterprise Networks
901 Explorer Boulevard
Huntsville, AL 35806
P.O. Box 140000
Huntsville, AL 35814-4000
256 963-8000 voice
256 963-8699 fax
General Information
800 9ADTRAN
[email protected]
www.adtran.com
Pre-Sales
Technical Support
800 615-1176 toll-free
[email protected]
www.adtran.com/support
Where to Buy
877 280-8416 toll-free
[email protected]
www.adtran.com/where2buy
Post-Sales
Technical Support
888 423-8726
[email protected]
www.adtran.com/support
ACES Installation &
Maintenance Service
888 874-ACES
[email protected]
www.adtran.com/support
International Inquiries
256 963 8000 voice
256 963-6300 fax
[email protected]
www.adtran.com/international
For the regional office
nearest you, visit:
www.adtran.com/where2buy
61203022L1-8C February 2006
Copyright
© 2006 ADTRAN, Inc.
All rights reserved.
ADTRAN is an ISO 9001, ISO 14001,
and a TL 9000 certified supplier
Specifications subject to change without notice. T1 CSU ACE is a trademark of ADTRAN, Inc.
ADTRAN is a registered trademark of ADTRAN, Inc. All registered trademarks and trademarks
mentioned in this publication are the property of their respective owners.