ADTRAN NetVanta 1235P Manual

NetVanta 1235P
ActivReach Ethernet Switch
Hardware Installation Guide
1700595G10 NetVanta 1235P
1702595G12 NetVanta ActivReach Media Converter
1702595G14 Hydra Interconnect Cable
1702595G16 NetVanta ActivReach Ethernet Port
Protection Device
1700530F1 NetVanta 1131 RPS/EPS
1700532F1 NetVanta 1131 RPS Cable
1700533F1 NetVanta 1131 EPS Cable
1700534F1 NetVanta 1131 Dual Mounting Tray
61700595G10-34A
December 2013

Trademarks NetVanta 1235P Hardware Installation Guide
2 Copyright © 2013 ADTRAN, Inc. 61700595G10-34A
Trademarks
Any brand names and product names included in this manual are trademarks, registered trademarks, or
trade names of their respective holders.
To the Holder of the Manual
The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change
the contents without prior notice.
In no event will ADTRAN be liable for any special, incidental, or consequential damages or for
commercial losses even if ADTRAN has been advised thereof as a result of issue of this publication.
Software Licensing Agreement
Each ADTRAN product contains a single license for ADTRAN-supplied software. Pursuant to the
Licensing Agreement, you may: (a) use the software on the purchased ADTRAN device only and (b) keep
a copy of the software for backup purposes. This Agreement covers all software installed on the system, as
well as any software available on the ADTRAN website. In addition, certain ADTRAN systems may
contain additional conditions for obtaining software upgrades.
901 Explorer Boulevard
P.O. Box 140000
Huntsville, AL 35814-4000
Phone: [phone]
Copyright © 2013 ADTRAN, Inc.
All Rights Reserved.
Printed in U.S.A.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

NetVanta 1235P Hardware Installation Guide Conventions
61700595G10-34A Copyright © 2013 ADTRAN, Inc. 3
Conventions
Notes provide additional useful information.
Cautions signify information that could prevent service interruption or damage to the
equipment.
Warnings provide information that could prevent injury or endangerment to human
life.

Safety Instructions NetVanta 1235P Hardware Installation Guide
4 Copyright © 2013 ADTRAN, Inc. 61700595G10-34A
Safety Instructions
When using your telephone equipment, please follow these basic safety precautions to reduce the risk of
fire, electrical shock, or personal injury:
1. Do not use this product near water, such as a bathtub, wash bowl, kitchen sink, laundry tub, in a
wet basement, or near a swimming pool.
2. Avoid using a telephone (other than a cordless type) during an electrical storm. There is a remote
risk of shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord, power supply, and batteries indicated in the manual. Do not dispose of
batteries in a fire. They may explode. Check with local codes for special disposal instructions.
5. The socket-outlet shall be installed near the equipment and shall be easily accessible.
If any of the following conditions occur, unplug the product from the electrical outlet and replace the part
or contact your qualified service personnel:
1. The power cable, extension cable, or plug is damaged.
2. An object has fallen into the product.
3. The product has been exposed to water.
4. The product has been dropped or damaged.
5. The product does not operate correctly when you follow the operating instructions.
Save These Important Safety Instructions
This equipment incorporates double pole/neutral fusing. If the neutral fuse opens and the
line fuse does not open, voltage could still be present in the unit.
These units contain no user-serviceable parts. They should only be serviced by qualified
service personnel.
Additional safety guidelines, such as Waste Electrical and Electronic Equipment (WEEE),
are given in the document NetVanta Safety and Regulatory Information available at
https://supportforums.adtran.com.

NetVanta 1235P Hardware Installation Guide FCC Radio Frequency Interference Statement
61700595G10-34A Copyright © 2013 ADTRAN, Inc. 5
FCC Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio frequencies. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Canadian Emissions Requirements
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus
as set out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the
Department of Communications.
Cet appareil numérique respecte les limites de bruits radioelectriques applicables aux appareils numériques
de Class A prescrites dans la norme sur le materiel brouilleur: “Appareils Numériques,” NMB-003 edictee
par le ministre des Communications.
Toll Fraud Liability
Be advised that certain security risks are inherent in the use of any telecommunications or networking
equipment, including but not limited to, toll fraud, Denial of Service (DoS) attacks, loss or theft of data, and the
unauthorized or illegal use of said equipment. ADTRAN OFFERS NO WARRANTIES, EITHER
EXPRESSED OR IMPLIED, REGARDING THE PREVENTION, DETECTION, OR DETERRENCE OF
TOLL FRAUD, NETWORKING ATTACKS, OR UNAUTHORIZED, ILLEGAL, OR IMPROPER USE OF
ADTRAN EQUIPMENT OR SOFTWARE. THEREFORE, ADTRAN IS NOT LIABLE FOR ANY LOSSES
OR DAMAGES RESULTING FROM SUCH FRAUD, ATTACK, OR IMPROPER USE, INCLUDING, BUT
NOT LIMITED TO, HUMAN AND DATA PRIVACY, INTELLECTUAL PROPERTY, MATERIAL
ASSETS, FINANCIAL RESOURCES, LABOR AND LEGAL COSTS. Ultimately, the responsibility for
securing your telecommunication and networking equipment rests with you, and you are encouraged to review
documentation regarding available security measures, their configuration and implementation, and to test such
features as is necessary for your network.
Service and Warranty
For information on the service and warranty of ADTRAN products, visit the Support section of the
ADTRAN website at http://www.adtran.com.

Service and Warranty NetVanta 1235P Hardware Installation Guide
6 Copyright © 2013 ADTRAN, Inc. 61700595G10-34A

6170595G10-34A Copyright © 2013 ADTRAN, Inc. 7
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Physical Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
NetVanta 1235P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
LED Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Unit Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Mounting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
RJ-45 Pinouts for ActivReach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Supplying Power to the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Installing a NetVanta ActivReach Media Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
NetVanta 1131 RPS/EPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
NetVanta 1131 Series Shipping Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
NetVanta 1131 Front Panel Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
NetVanta 1131 Rear Panel Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
LED Behaviors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Installing the NetVanta 1131 RPS/EPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Rack Mounting the NetVanta 1131 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Wall Mounting the NetVanta 1131 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Connecting the NetVanta 1131 and the NetVanta Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Powering the NetVanta 1131 and the NetVanta Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Appendix A. Connector Pin Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Table of Contents NetVanta 1235P Hardware Installation Guide
8 Copyright © 2013 ADTRAN, Inc. 6170595G10-34A

61700595G10-34A Copyright © 2013 ADTRAN, Inc. 9
List of Figures
Figure 1. NetVanta 1235P Front Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Figure 2. NetVanta 1235P Rear Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 3. NetVanta 1235P ActivReach Switch Wallmount Installation . . . . . . . . . . . . . . . . . . . . . . . . . 24
Figure 4. ActivReach RJ-45 Pin Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Figure 5. NetVanta ActivReach Media Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Figure 6. NetVanta 1131 Front Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Figure 7. NetVanta 1131 Rear Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Figure 8. Rack Mounting the NetVanta 1131 Using the Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Figure 9. Rack Mounting the NetVanta 1131 Using the Dual Mounting Tray . . . . . . . . . . . . . . . . . . . . 34
Figure 10. Wall Mounting the NetVanta 1131 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

List of Figures NetVanta 1235P Hardware Installation Guide
10 Copyright © 2013 ADTRAN, Inc. 61700595G10-34A

61700595G10-34A Copyright © 2013 ADTRAN, Inc. 11
List of Tables
Table 1. Front Panel LED Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Table 2. NetVanta ActivReach Media Converter LED Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Table 3. Front Panel LED Behaviors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Table A-1. CONSOLE Port Pinouts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Table A-2. 10/100Base-T Ethernet Port Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Table A-3. SFP Slot Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Table A-4. 50-Pin Champ Connector Pinouts for Hydra Interconnect Cable. . . . . . . . . . . . . . . . . . . . . . 41

List of Tables NetVanta 1235P Hardware Installation Guide
12 Copyright © 2013 ADTRAN, Inc. 61700595G10-34A

61700595G10-34A Copyright © 2013 ADTRAN, Inc. 13
1. INTRODUCTION
This hardware installation guide describes the NetVanta 1235P ActivReach Ethernet unit’s physical
characteristics, lists its features and specifications, introduces basic functionality, and provides installation
instructions.
•Physical Descriptions on page 14
•Product Specifications on page 19
•Unit Installation on page 21
•NetVanta 1131 RPS/EPS on page 29
For additional information on mounting options, suppling power, upgrading memory, installing a CompactFlash
card, and installing the NetVanta 1131 RPS/EPS, refer to the following sections:
•Mounting Options on page 22
•Supplying Power to the Unit on page 25
•Installing a NetVanta ActivReach Media Converter on page 26
•Installing the NetVanta 1131 RPS/EPS on page 32
For information on switch configuration for a specific application, refer to the configuration guides provided on
the ADTRAN Support Community. For details on the command line interface (CLI), refer to the AOS
Command Reference Guide. All other related documents are also available online at
http://supportforums.adtran.com.

Physical Descriptions NetVanta 1235P Hardware Installation Guide
14 Copyright © 2013 ADTRAN, Inc. 61700595G10-34A
2. PHYSICAL DESCRIPTIONS
NetVanta 1235P
The NetVanta 1235P is a Layer 3 Lite managed switch. It runs AOS, is managed through an EIA-232
CONSOLE port (DB-9), Telnet session, or GUI, and is RoHS compliant (telecommunications exemption).
The NetVanta 1235P is described in the following sections.
The NetVanta 1235P is housed in a 1U-high, rack-mountable metal enclosure that can be mounted in a standard
19-inch rack and includes a universal AC power supply. The front panel contains 24 10/100Base-T Ethernet
interfaces that are accessed via standard RJ-45 connectors. The 24 10/100Base-T Ethernet interfaces support
both Ethernet and ADTRAN’s ActivReach Ethernet. Two 1000Base-X SFP slots and two 2500Base-X slots (all
supporting industry standard SFP modules) are also available on the front panel for high-speed uplink via fiber
or copper. The NetVanta 1235P EIA-232 CONSOLE port (DB-9) is located on the front panel.
ActivReach Ethernet
The NetVanta 1235P has 24 10/100Base-T Ethernet ports that support both standard and ADTRAN’s
ActivReach Ethernet. When used in conjunction with the NetVanta ActivReach Media Converter
(P/N 1702595G12), the NetVanta 1235P converts standard Ethernet to ActivReach Ethernet, which supports
rates of 10/100 Mbps over 1-, 2-, and 4-pair infrastructure wiring at cable distances beyond 100 meters.
For applications requiring connection into a single RJ-21, a hydra interconnect cable (P/N 1702595G14) can be
used. The hydra interconnect cable is suitable for 10 Mbps applications only. See Table A-4 on page 41 for the
hydra cable’s 50-pin Champ connector pinouts.
For more information and help installing your NetVanta ActivReach product, go to
http://www.adtran.com/activreach-help.
Redundant Power Supply
The NetVanta 1235P unit provides a connection for an optional RPS on the rear panel. The NetVanta 1131
RPS/EPS (P/N 1700530F1) is sold separately. When connected, the RPS will provide 120 W of backup power
should the internal power supply fail. The units will automatically switch to RPS when needed, providing
uninterrupted power to the unit. Refer to NetVanta 1131 RPS/EPS on page 29 for more information.
Extended Power Supply
The NetVanta 1235P unit also provides a connection for an optional EPS on the rear panel. The NetVanta 1131
RPS/EPS (P/N 1700530F1) is sold separately. In the event that the internal power supply fails, the EPS will
provide up to 370 W of power for PoE applications. The units will automatically switch to EPS when needed,
providing uninterrupted power to the unit. Refer to NetVanta 1131 RPS/EPS on page 29 for more information.
SFP Module Slots
The NetVanta 1235P unit supports two 1000Base-X and two 1000/2500Base-X SFP slots on the front panel that
accept a number of industry standard SFP modules. The SFP modules provide Gigabit Ethernet fiber
connectivity for high-speed uplinks or switch stacking. For a list of supported SFP modules, visit the ADTRAN
website at http://www.adtran.com.

NetVanta 1235P Hardware Installation Guide Physical Descriptions
61700595G10-34A Copyright © 2013 ADTRAN, Inc. 15
Power over Ethernet
The NetVanta 1235P provides the ability to detect attached powered devices (PDs) and deliver power to the PD
via existing Ethernet cabling. The NetVanta 1235P is fully compliant with the IEEE 802.3af PoE standard. By
default, the PoE switches discover and provide power to IEEE-compliant PDs.
ADTRAN’s ActivReach Ethernet supports Power over Ethernet (PoE) over a single pair. When used in
conjunction with the NetVanta ActivReach Media Converter (P/N 1702595G12), power can be either
terminated at the Media Converter or supplied to a downstream device.
NetVanta 1235P Shipping Contents
Each NetVanta 1235P unit is shipped in its own cardboard shipping carton. Open each carton carefully, and
avoid deep penetration into the carton with sharp objects.
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in transit,
immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to the Support page on
the ADTRAN website at http://www.adtran.com/support).
Domestic shipments of the NetVanta 1235P includes the following items:
• NetVanta 1235P base unit
• A detachable power cable with a grounded, three-prong plug
• Quick start guide
• Two 19-inch rack mounting brackets with four mounting screws
International shipments of the NetVanta 1235P includes the following items:
• NetVanta 1235P base unit
• All necessary power cords
• Quick start guide
• Two 19-inch rack mounting brackets with four mounting screws
NetVanta 1235P Front Panel Design
The NetVanta 1235P front panel is shown below. Table 1 on page 18 describes all of the LEDs, and
Appendix A on page 39 shows the connector pinouts.
Figure 1. NetVanta 1235P Front Panel Layout
Front Panel Features
Status LED
The STAT LED is located on the left side of the unit and indicates the unit’s status.
Redundant Power Supply LED
The RPS LED is located on the left side of the unit and indicates when the unit is receiving power
from the RPS.
NetVanta 1235P
G1 G2 G3 G4
VCID
PoE
LINK/ACT
EPS
RPS
STAT
12 34 56 78 91011 12 13 14 15 16 17 18 19 20 21 22 23 24 ActivReach
1G 2.5G

Physical Descriptions NetVanta 1235P Hardware Installation Guide
16 Copyright © 2013 ADTRAN, Inc. 61700595G10-34A
Extended Power Supply LED
The EPS LED is located on the left side of the unit and indicates when the unit is receiving power from
the EPS.
Link/Activity LED
The LINK/ACT LED is located on the left side of the unit and indicates that the port LEDs are
displaying link/activity status.
Power over Ethernet LED
The PoE LED is located on the left side of the unit and indicates that the port LEDs are displaying PoE
status.
VCID LED (Future Release)
The VCID LED is located on the left side of the unit and indicates that the port LEDs are displaying
VCID.
LED Mode Switch
The LED mode switch is located on the left side of the unit and is used to toggle Ports 1through 24
between VCID, link/activity, and PoE display modes.
CONSOLE Interface
The CONSOLE interface is an EIA-232 serial port (DCE) that provides local management and
configuration (via a DB-9 female connector). Refer to Table A-1 on page 39 for pinouts.
10/100Base-T Ethernet Interfaces
The front panel contains 24 10/100Base-T Ethernet interfaces (RJ-45). These interfaces are arranged in
stacked pairs, with the numbers 1through 24 screened from left to right directly above the
corresponding ports. Status LEDs for each stacked pair of interfaces are located directly over the
interfaces. Refer to Table A-2 on page 39 for pinouts.
SFP Slots
The front panel contains four industry standard SFP slots for fiber or copper connectivity. These
interfaces are numbered G1 through G4 and their status LEDs are located directly above these
numbers. Refer to Table A-3 on page 40 for pinouts.
Connection directly to an external modem requires a cross-over cable.

NetVanta 1235P Hardware Installation Guide Physical Descriptions
61700595G10-34A Copyright © 2013 ADTRAN, Inc. 17
NetVanta 1235P Rear Panel Design
The NetVanta 1235P rear panel is shown below.
Figure 2. NetVanta 1235P Rear Panel Layout
Rear Panel Interfaces
RPS
The rear panel has a power input to a +12 VDC RPS. The RPS LED, located on the front panel of the
unit, indicates when the unit is being powered from the RPS.
EPS
The rear panel has a power input to a +54 VDC EPS. The EPS LED, located on the front panel of the
unit, indicates when the unit is being powered from the EPS.
Power Connection
The rear panel has a power input to the AC universal power supply. Please refer to Supplying Power to
the Unit on page 25 for connection details.
AC INPUT
RPS - 12VDC EPS - 50VDC

Physical Descriptions NetVanta 1235P Hardware Installation Guide
18 Copyright © 2013 ADTRAN, Inc. 61700595G10-34A
LED Descriptions
The following table describes LED activity.
Table 1. Front Panel LED Descriptions
LED Color Indication
STAT Off Unit is not receiving power.
Green (flashing) On power up, the STAT LED flashes rapidly for five
seconds, during which time the user may escape to boot
mode from the CONSOLE port.
Green (solid) Power is on and self-test passed.
Red (solid) Power is on, but the self-test failed or the application code
could not be booted.
RPS Off RPS is not connected.
Green (solid) RPS is connected and the internal supply is functioning.
Red (solid) RPS is connected and the internal supply has failed.
EPS Off EPS is not connected.
Green (solid) EPS is connected and the internal supply is functioning.
Red (solid) EPS is connected and the internal supply has failed.
LINK/ACT Off Link status/activity is not being displayed.
Green (solid) Link status/activity is being displayed.
PoE Off PoE status is not being displayed.
Green (solid) PoE status is being displayed.
VCID
(Future Release) Off VCID is not selected.
Green (solid) VCID is selected. The port LED that corresponds to the
unit’s VCID will display green.
Port LED in
Link/Activity Mode
(1- 24, G1 through G4)
Off The port is not connected.
Green (solid) The link is up and the port is enabled.
Amber (flashing) There is activity on the port.
Port LED in PoE Mode
(1- 24 PoE units only) Off The port is not delivering power.
Green (solid) The port is delivering power.
Red (solid) The port has detected a PoE fault.
Ports G1 through G4 are always in LINK/ACT mode.

NetVanta 1235P Hardware Installation Guide Product Specifications
61700595G10-34A Copyright © 2013 ADTRAN, Inc. 19
3. PRODUCT SPECIFICATIONS
Physical Interface
Ethernet Ports
• 24 standard 10/100Base-T interfaces plus ADTRAN’s ActivReach Ethernet capability
• 4 SFP interfaces
• Autorate/duplex/MDI/MDI-X
Console Port
• DB-9, EIA-232
Switching
• Layer 3 Lite switching capability
• Nonblocking
• 8 k medium access control (MAC) addresses
Maximum Forwarding Bandwidth
• 62 Gbps
Diagnostics
• Port mirroring
• Link Layer Discovery Protocol (LLDP) (802.1AB)
• LLDP-Media Endpoint Discovery (LLDP-MED)
• Ping
• Cable diagnostics
Front Panel Status LEDs
• Power status
• EPS and RPS status
• LAN link and activity
• PoE status
• VCID status (future release)
Port Statistics
• Number of TX/RX frames
• Number of collisions
• Number of errors
Spanning Tree Support
• 802.1D spanning tree
• 802.1w rapid spanning tree
Link Aggregation
• 802.3ad link aggregation
• Support for six trunk groups, 8 ports per group
Quality of Service (QoS)
• 802.1p and DiffServ
• Four output queues per egress port
• Weighted round robin (WRR) and strict priority

Product Specifications NetVanta 1235P Hardware Installation Guide
20 Copyright © 2013 ADTRAN, Inc. 61700595G10-34A
VLAN Support
• Port-based virtual local area networks (VLANs)
• 802.1Q tagged trunked VLANs
• Support for up to 255 active VLANs
Storm Control
• Broadcast, unicast, and multicast
Administration
• Familiar CLI
• GUI
• n-Command®support
• SNMP v3
• SYSLOG logging
• Email alerts (Simple Mail Transfer Protocol (SMTP))
• Tool command language (Tcl) scripting
Network Access Control
• Port authentication (802.1x)
Wi-Fi Controller
• Controls up to 24 NetVanta wireless access points (WAPs)
Environment
• Operating Temperature: 0°C to 50°C (32°F to 122°F)
• Storage Temperature: -20°C to 70°C (-4°F to 158°F)
• Relative Humidity: Up to 95 percent, noncondensing
Physical
• Chassis: 1U, 19-inch, rack-mountable metal enclosure
• Dimensions: 1.7-inch H x 17.2-inch W x 12.5-inch D
• Internal AC power: 110 to 240 VAC, 50/60 Hz, 370 W maximum
• Redundant power supply: 12 VDC
• Extended power supply: 50 VDC
Compliance
• FCC Part 15 Class A
• EN 55022 Class A
• EN 55024
• EN 61000-3-2
• EN 61000-3-3
• ICES 003 Class A
• EN 300 386
• AS/NZS CISPR22 Class A
• UL/CUL 60950-1
• EN 60950-1
• IEC 60950-1
• AS/NZS 60950-1
• RoHS compliant (telecommunications exemption)