ADVANCED EV EV1 User manual

909-938-7721
advancedev.com

Ⅰ
Particularly important information
is distinguished by using the
following symbols and notes :
THE SAFETY ALERT SYMBOL
ATTENTION ! BE ALERT ! YOUR
SAFETY IS INVOLVED!
Dear Users,
Great thanks for purchasing our company's electric
cars. While adopting advanced technology of Europe
and the US
and main imported components, the cars are
also with the innovative design, luxury professional
painting and high strength steel welding material , all of
which make our cars look fashionable, reliable, beautiful
and excellent in performance. With lightweight, strong
climbing ability, free pollution, low noise, convenient
charging , good braking performance and reasonable
price, our cars are the most advanced in the electric car
field at present.
In order to help users operate and maintain the car
correctly, make the car play the best performance
and prolong its working time, hereby we make
the operation manual. Please read it carefully.
The product is always in improving. If the manual
doesn't match with the real product, the read
product is the standard.
Note: This bus is mainly designe d for relaxation,
sightseeing, tourism, thus suitable for used in special area
like tourism scenic area, community, pedestrian mall etc.
NOTE:
AdvancedEV continually seeks
improvement in product quality.
Even though this manual contains
the latest product information
available at the time of printing,
there may be minor discrepancies
between your golf car and this
manual. If you have any question
concerning this manual, please
contact your AdvancedEV dealer
and we will work it out.
This manual should be considered
as a permanent part of your golf car
and should stay with the car when
the car is sold.
NOTE:
This message provides additional
main information.
This message describes special
precautions that must be taken so
as to avoid damage to the car.
Read and understand the
manual completely before
operating your golf car.
Failure to follow WARNING
instructions could result in
severe injury or death to the golf
car passengers, bystanders, or
the person driving the golf car.
Preface
IMPORTANT MANUAL INFORMATION

1
2-4
5-11
12-13
14-16
17-26
27
28-29
30
Important Labels
Operational Safety
Structure and Specifications
Operation And Control
Preparation Before Operating
Maintenance
Storage
After-Sale Service
1266/1268 Trouble Shooting Chart
Content

2
WAR NIN G
EXPLOSIV E GA SE S SULFURIC
ACID
in batt eries w il l
burn sk in, eye s,
and clo thing . Do
not tip b atter ie s.
Keep ve nt caps
tight a nd leve l.
In even t of inju ry,
flush w ith phy si cian
immed iatel y.
WA RN ING/AVERT IS SM ENT
ELECTRIC AL
SHORTS
can res ult
in burn s.
Do not ma ke
conne ction
betwe en
posit ive and
negat ive
batte ry
terminals.
W A R N I N G
Wind s h ie l ds d o n ot
prov i d e pr o te c ti o n
from o t h er f l yi n g
obje c t s.
WARNING
OPERATION INSTRUCTION
1
2
34
S A F E T Y A N D
I N S T R U C T I O N
LABELS
Please read the attached
labels carefully before
driving the golf car , and
p r o m p t l y r e p l a c e a n y
label that is damaged or
removed .
●Read the manuel and safety instruction labels on the golf car
before driving :
●Be sure that passengers are seated stably .
●Select “ forward “ or “ reverse “ key .
●Tread the accelerator to start moving ; and tread the parking
pedal to stop .
●Please drive safely according to the terrain ,visibility and
driving experience ; please drive carefully in the crowded and
slippery places .
●When parking , please tread the parking pedal and draw up the
handle of hand brake . When starting the car , please release the
handle .
a r e r e l e a s e d
w h e n b a t t e r i e s
a r e c h a r g e d o r
d is ch a rg e d . K ee p
w e l l v e n t i l a t e d .
K e e p s p a r k s ,
f l a m e s a n d
c i g a r e tt e s a w ay.
S h i e l d e y e s
w h e n w o r k i n g
near ba tteri es
● Please read the safety and instruction labels on the steering wheel before operating ;
● No extra passengers can be allowed ;
●Start the car untill all passengers are seated well ;
●Drive slow when turning ;
● Tread the parking pedal before leaving the car ;
● Pull the main switch and turn the key off when not using the car ;
●The passengers should be seated stably and hold the armrest tight ;
● Keep hands and feet inside the car .
1
GO
PARK
STOP
parking pedal Accelerator pedal
Brake pedal
Before operating:
1. Read this manual and all the other operations or labels marked on the car body
before operating.
2. Only authorized people should drive the car only in the designated area.
3. Do not OVERLOAD.
4. Do not drive the car if drinking any alcohol or having any drugs which could
distract the driver's vision and judgment.
When operating:
1. Keep your body in the car and keep well-seated when the car starts moving.
2. Do not start the car until all passengers are seated.
3. Keep your hands on the steering wheel and your eyes on the path ahead.
4. Be especially careful when backing the car in crowded places. Please keep
watching back and roll back slowly.
5. Avoid sudden start and brake.
6. Please accelerate or decelerate the car according to the ground condition.
7. Do not turn the steering wheel too sharply at high speed.
8. Keep driving slowly straight up or straight down, not at one same angle when
on slopes.
Do not overload or make any modification towards spare
parts without permission.
Important Labels Safety Operation

4
5
Whole structure：
top roof
1
2
3
4
5
6
7
8
9
10
1 1
1 2
1 3
14
15
16
17
18
19
20
21
22
23
24
sand box
cool box
rear tire cover
side mirror
windshield
windshield frame
head light/R
front cover
head light base/L
side cover sheet
rear body cover
steering wheel
combination switch
power indicator
brake padel
steering column
key switch
switch F/R
accelerator padel
armrest
front tire
rear tire
front bumper
!
1
2
3
4
5
6
7
8
9
10 11 12 13
14
15
16
18
21
17
19
20
22
23
24 2625 27
28
29
25
26
27
28
tail light/L
rear bumper
tail light/R
29
Bag Strap Holder
ball washer
1. Keep your hands on the steering
wheel and your eyes on the path ahead.
2. Be especially careful when backing
in the car in crowded places. Please
keep watching back and roll back
slowly.
3. Avoid sudden and strong shock of
the car and change to the proper speed
according to the ground condition.
4. Do not turn the steering wheel too
sharply when at high speed.
5. Keep driving slowly straight up or
straight down, not at one same angle.
6. Do not make any modifaction or
addition about the operation safety and
loading capacity, and this whole
manual.
Structure And Specifications
Operation Safety

6
Electronic system
controller Curtis controller 1266A-5201/275A (USA Brand)
battery Lead acid battery 8V x 6pcs 140AH 5Hr Rate
Motor High efficient Sepex ADC 3.7 KW motor
charger Intelligent charger48V,20A
Accelerator
Electrical accelerator 48V input, Hall output 0-5V
Bo dy c o n f i g u r a t io n
Wind shield Organic glass Top roof
ABS plastic vacuum forming
Seat Leather Floor
Rubber sliding proof mat
Side mirror L & R side mirrors
Steering
system
Two way gear steering system,automatically backlash
compensation
Light&signal
48V/12-300W Front light, turning light, rear combo lights, horn, reverse buzz
Body PP plastic injection chassis High tensile steel welding structure, electrophoresis
treatment for anti-rust
Dash board PP plastic injection, power indicator, head light switch, turning light switch, key switch, F/R switch
Brake rear drum + combo brake pedal parking
Front Suspension
Spring+hydraulic shock absorber, independent suspension
Rear suspension
Wheel & tire
Loading staff
1.1dimension:L*W*H
1.2 wheelbase
1.3weight(including batter)
1.4load capacity
1.5max speed
1.6mileage
1.7min turning radius
1.8max climbing ability
1.9min clearance
1.10brake distance
1.11tread
2.battery specification
2.1battery type
2.2volume
2.3 voltage
3.motor specification
3.1motor type
3.2rated power
3.3rated rotating speed
3.4 rated voltage
3.5rated currency
3.6ration
1. specification
2400*1200*1800mm
1650mm
470kg
150kg
22-24km/h
80-100km/h(level road)
2.9m
25%
100mm
front900mm/rear 1000mm
＜6m
lead acid battery
140Ah
48V
DC series motor
3.7kw
2500r/min
48V
105A
15min
Excellent transaxle, gear ratio 12.31:1, half independent suspension + hydraulic shock absorber
Steel wheel 18*8.50-8+tire (452mm)
2 persons ( including driver)
7
(AEV·4)Whole car specifications (standard) : detailed
specification refers to actual contract
Electronic system
controller Curtis controller 1266A-5201/275A (USA Brand)
battery Lead acid battery 8V x 6pcs 140AH 5Hr Rate
Motor High efficient Sepex ADC 3.7 KW motor
charger Intelligent charger48V,20A
Accelerator
Electrical accelerator 48V input, Hall output 0-5V
Bo dy c o n f i g u r a t io n
Wind shield Organic glass Top roof
ABS plastic vacuum forming
Seat Leather Floor
Rubber sliding proof mat
Side mirror L & R side mirrors
Steering
system
Two way gear steering system,automatically backlash
compensation
Light&signal
48V/12-300W Front light, turning light, rear combo lights, horn, reverse buzz
Body PP plastic injection chassis High tensile steel welding structure, electrophoresis
treatment for anti-rust
Dash board PP plastic injection, power indicator, head light switch, turning light switch, key switch, F/R switch
Brake rear drum + combo brake pedal parking
Front Suspension
Spring+hydraulic shock absorber, independent suspension
Rear suspension
Wheel & tire
Loading staff
1.1dimension:L*W*H
1.2 wheelbase
1.3weight(including batter)
1.4load capacity
1.5max speed
1.6mileage
1.7min turning radius
1.8max climbing ability
1.9min clearance
1.10brake distance
1.11tread
2.battery specification
2.1battery type
2.2volume
2.3 voltage
3.motor specification
3.1motor type
3.2rated power
3.3rated rotating speed
3.4 rated voltage
3.5rated currency
3.6ration
1. specification
2760*1200*1800mm
1650mm
550kg
300kg
22-24km/h
80-90km/h(level road)
2.9m
25%
100mm
front900mm/rear 1000mm
＜6m
lead acid battery
140Ah
48V
DC series motor
3.7kw
2500r/min
48V
105A
15min
Excellent transaxle, gear ratio 12.31:1, half independent suspension + hydraulic shock absorber
Steel wheel 18*8.50-8+tire (452mm)
4 persons ( including driver)
(AEV·2)Whole car specifications (standard) :
detailed specification refers to actual contract
Structure And Specifications
Structure And Specifications

8
(AEV·4F)Whole car specifications (standard) :
detailed specification refers to actual contract
Electronic system
controller Curtis controller 1266A-5201/275A (USA Brand)
battery Lead acid battery 8V x 6pcs 140AH 5Hr Rate
Motor High efficient Sepex ADC 3.7 KW motor
charger Intelligent charger48V,20A
Accelerator
Electrical accelerator 48V input, Hall output 0-5V
Bo dy c o n f i g u r a t io n
Wind shield Organic glass Top roof
ABS plastic vacuum forming
Seat Leather Floor
Rubber sliding proof mat
Side mirror L & R side mirrors
Steering
system
Two way gear steering system,automatically backlash
compensation
Light&signal
48V/12-300W Front light, turning light, rear combo lights, horn, reverse buzz
Body PP plastic injection chassis High tensile steel welding structure, electrophoresis
treatment for anti-rust
Dash board PP plastic injection, power indicator, head light switch, turning light switch, key switch, F/R switch
Brake rear drum + combo brake pedal parking
Front Suspension
Spring+hydraulic shock absorber, independent suspension
Rear suspension
Wheel & tire
Loading staff
1.1dimension:L*W*H
1.2 wheelbase
1.3weight(including batter)
1.4load capacity
1.5max speed
1.6mileage
1.7min turning radius
1.8max climbing ability
1.9min clearance
1.10brake distance
1.11tread
2.battery specification
2.1battery type
2.2volume
2.3 voltage
3.motor specification
3.1motor type
3.2rated power
3.3rated rotating speed
3.4 rated voltage
3.5rated currency
3.6ration
1. specification
3160*1200*1800mm
2410mm
510kg
300kg
22-24km/h
70-90km/h(level road)
4m
25%
100mm
＜6m
front900mm/rear 1000mm
lead acid battery
140Ah
48V
DC series motor
3.7kw
2500r/min
48V
105A
15min
Excellent transaxle, gear ratio 12.31:1, half independent suspension + hydraulic shock absorber
Steel wheel 18*8.50-8+tire (452mm)
4 persons ( including driver)
9
Electronic system
controller Curtis controller 1266A-5201/275A (USA Brand)
battery Lead acid battery 8V x 6pcs 140AH 5Hr Rate
Motor High efficient Sepex ADC 3.7 KW motor
charger Intelligent charger48V,20A
Accelerator
Electrical accelerator 48V input, Hall output 0-5V
Bo dy c o n f i g u r a t io n
Wind shield Organic glass Top roof
ABS plastic vacuum forming
Seat Leather Floor
Rubber sliding proof mat
Side mirror L & R side mirrors
Steering
system
Two way gear steering system,automatically backlash
compensation
Light&signal
48V/12-300W Front light, turning light, rear combo lights, horn, reverse buzz
Body PP plastic injection chassis High tensile steel welding structure, electrophoresis
treatment for anti-rust
Dash board PP plastic injection, power indicator, head light switch, turning light switch, key switch, F/R switch
Brake rear drum + combo brake pedal parking
Front Suspension
Spring+hydraulic shock absorber, independent suspension
Rear suspension
Wheel & tire
Loading staff
1.1dimension:L*W*H
1.2 wheelbase
1.3weight(including batter)
1.4load capacity
1.5max speed
1.6mileage
1.7min turning radius
1.8max climbing ability
1.9min clearance
1.10brake distance
1.11tread
2.battery specification
2.1battery type
2.2volume
2.3 voltage
3.motor specification
3.1motor type
3.2rated power
3.3rated rotating speed
3.4 rated voltage
3.5rated currency
3.6ration
1. specification
3520*1200*1800mm
2410mm
590kg
450kg
22-24km/h
70-80km/h(level road)
4m
20%
100mm
＜6m
front900mm/rear 1000mm
lead acid battery
140Ah
48V
DC series motor
3.7kw
2500r/min
48V
105A
15min
Excellent transaxle, gear ratio 12.31:1, half independent suspension + hydraulic shock absorber
Steel wheel 18*8.50-8+tire (452mm)
6 persons ( including driver)
(AEV·6)Whole car specifications (standard) :
detailed specification refers to actual contract
Structure And Specifications
Structure And Specifications

10
Electronic system
controller Curtis controller 1266A-5201/275A (USA Brand)
battery Lead acid battery 8V x 6pcs 140AH 5Hr Rate
Motor High efficient Sepex ADC 3.7 KW motor
charger Intelligent charger48V,20A
Accelerator
Electrical accelerator 48V input, Hall output 0-5V
Bo dy c o n f i g u r a t io n
Wind shield Organic glass Top roof
ABS plastic vacuum forming
Seat Leather Floor
Rubber sliding proof mat
Side mirror L & R side mirrors
Steering
system
Two way gear steering system,automatically backlash
compensation
Light&signal
48V/12-300W Front light, turning light, rear combo lights, horn, reverse buzz
Body PP plastic injection chassis High tensile steel welding structure, electrophoresis
treatment for anti-rust
Dash board PP plastic injection, power indicator, head light switch, turning light switch, key switch, F/R switch
Brake rear drum + combo brake pedal parking
Front Suspension
Spring+hydraulic shock absorber, independent suspension
Rear suspension
Wheel & tire
Loading staff
1.1dimension:L*W*H
1.2 wheelbase
1.3weight(including batter)
1.4load capacity
1.5max speed
1.6mileage
1.7min turning radius
1.8max climbing ability
1.9min clearance
1.10brake distance
1.11tread
2.battery specification
2.1battery type
2.2volume
2.3 voltage
3.motor specification
3.1motor type
3.2rated power
3.3rated rotating speed
3.4 rated voltage
3.5rated currency
3.6ration
1. specification
3920*1200*1800mm
3170mm
550kg
450kg
22-24km/h
70-80km/h(level road)
5.1m
20%
100mm
＜6m
front900mm/rear 1000mm
lead acid battery
140Ah
48V
DC series motor
3.7kw
2500r/min
48V
105A
15min
Excellent transaxle, gear ratio 12.31:1, half independent suspension + hydraulic shock absorber
Steel wheel 18*8.5 0 -8+tire (452mm)
6 persons ( including driver)
11
(AEV·8)Whole car specifications (standard) : detailed
specification refers to actual contract
Electronic system
controller Curtis controller 1268-5403/400A (USA Brand)
battery Lead acid battery 8V x 6pcs 140AH 5Hr Rate
Motor High efficient Sepex ADC 3.7 KW motor
charger Intelligent charger48V,20A
Accelerator
Electrical accelerator 48V input, Hall output 0-5V
Bo dy c o n f i g u r a t io n
Wind shield Organic glass Top roof
ABS plastic vacuum forming
Seat Leather Floor
Rubber sliding proof mat
Side mirror L & R side mirrors
Steering
system
Two way gear steering system,automatically backlash
compensation
Light&signal
48V/12-300W Front light, turning light, rear combo lights, horn, reverse buzz
Body PP plastic injection chassis High tensile steel welding structure, electrophoresis
treatment for anti-rust
Dash board PP plastic injection, power indicator, head light switch, turning light switch, key switch, F/R switch
Brake rear drum + combo brake pedal parking
Front Suspension
Spring+hydraulic shock absorber, independent suspension
Rear suspension
Wheel & tire
Loading staff
1.1dimension:L*W*H
1.2 wheelbase
1.3weight(including batter)
1.4load capacity
1.5max speed
1.6mileage
1.7min turning radius
1.8max climbing ability
1.9min clearance
1.10brake distance
1.11tread
2.battery specification
2.1battery type
2.2volume
2.3 voltage
3.motor specification
3.1motor type
3.2rated power
3.3rated rotating speed
3.4 rated voltage
3.5rated currency
3.6ration
1. specification
4280*1200*1800mm
3170mm
630kg
600kg
22-24km/h
70-80km/h(level road)
5.1m
20%
100mm
＜6m
front900mm/rear 1000mm
lead acid battery
140Ah
48V
DC series motor
3.7kw
2500r/min
48V
105A
15min
Excellent transaxle, gear ratio 12.31:1, half independent suspension + hydraulic shock absorber
Steel wheel 18*8.5 0 -8+tire (452mm)
8 persons ( including driver)
(AEV·6F)Whole car specifications (standard) :
detailed specification refers to actual contract
Structure And Specifications
Structure And Specifications

12
R U N
OFF
OFF
RUN
13
48V
1
0
Turning on Main Switch
1. Shifting the switch to RUN position
then can turn on the power supply of
car.
2. Shifting the switch to OFF position
then can turn off the power supply of
car.
Completely stopping car before shifting F/R switch. When shifting F/R
switch, please turn switch to middle position for 2s at first, then choosing
Forward switch or Reverse switch. Don't shift F/R switch in a hurry in
case that the sensor will be burnt or switch will be out of use.
Forward/Reverse Switch
The Forward/Reverse Switch is used to
shift the car to forward, reverse or
stop. Forward for upward, Reverse for
downward, Park for middle. When
choosing reverse switch, the reverse
buzzer sounds.
Key Switch
1. Plugging the key and turn right then
can turn on the key switch (Note:
Shifting the F/R switch to the middle
position before turning on key switch).
2. Turning left and then can turn off the
switch. Switch can be removed only at
this state.
Voltage Indicator
Voltage Indicator is to show the
electricity and remains custom to
charge on time. The voltage will show
full charged when charing enough time.
1. Electricity display reduce with the
consumption of electricity during
working.
2. When electricity is close to little
electricity warning, it is shown by
moving between first space and second
space;
3. When electricity enters into under-
electricity warning, it is displayed by
flashing of first space in left.
Head light switch
Turning light switch
Accelerator pedal
Turn on the key switch, choose forward
or backward, release brake, put your
right foot on the accelerator pedal, soft
step down the pedal to start the car.
Attention: don't step down the pedal to
the end in rush.
Operation And Control Operation And Control

14
Tire pressure
25PSI grass/dirt
36 PSI road
15
AWear limit
Be sure that the main switch key
is removed before performing the
pre-operating checks to prevent
accidental starting, and apply the
parking brake to keep the car
from moving.
SEAT
Opening the seat for checking
and servicin
Batteries
Tire condition
Steering system
Back-up buzzer
Pedal operation
Body and chassis
PRE-OPERATION CHECKLIST
Before each use, please check the
following
Pre operation checks should be made
each time you use your golf car. Get in
the habit of performing the following
checks in the same way so that they
become second nature.
BATTERY
Charge batteries before every use.
See charging steps in chapter 6.
Check that the batteries are held
securely in place to prevent the
batteries from vibration or jarring.
Also check that no prevent battery
acid from spilling from the battery.
Check the battery terminals for
corrosion.
TIRE CONDITION
Check the tire air pressure before the
operation of car.
Tire wear limit
Check the tire surface for damage,
cracks or embedded objects. When
tire tread wears down to 0.04(1mm),
replace the tire.
Pre Operation
Pre Operation

16 17
CAUTION
A
B
Steering system
Check the steering system whether there
is too much empty steering
a. Put the steering wheel up and down,
front and back
b. Turning the steering wheel left or right
If you find too much empty steering or
hear noise, it means some parts wrong and
please contact your dealer immediately.
Reverse alarm
Turn the F/R switch to "R" for checking
reverse alarm.
Pedal operation
Check the pedals operation, if it's abnormal,
contact dealer immediately.
Brake pedal
When step down the pedal, you feel well,
release it to be in the original position.
Brake pedal
Accelerator pedal
Accelerate pedal
Check the flexibility and reliability of
pedal, it returns to original position after
step down.
Battery electrolyte is poisonous and
dangerous, causing severe burns, etc. It
contains sulfuric acid. Avoid contacting
with skin, eyes and clothes.
Antidote:
EXTERNAL: Flush with water
INTERNAL: Drink large quantities of water
or milk. Follow with milk of magnesia,
beaten egg, or vegetable oil.
Call physician immediately.
EYES: Flush with water for 15 minutes
and get prompt medical attention.
Batteries produce explosive gases. Keep
sparks, flames and cigarettes away.
Make sure it is ventilated when charging
or using in enclosed space. Always shield
eyes when working near batteries.
BATTERY CARE
Keep out reach of children.
Batteries provide power for your electronic car and must
be properly maintained and recharged for maximum
performance and service life. The ways to maintain your
batteries
1. Clean the top of the batteries with soda water if
necessary to remove corrosion.
2. Check the fluid level before and after charging.
Do not allow cleaning material to
enter battery cells.
Maintenance
Pre Operation

18
19
BATTERY CHARGING
Read and understand the manual
provided with your car's battery
charger before charging batteries.
Explosive hydrogen gas is produced
while batteries are being charged.
Only charge batteries in well
ventilated areas (A minimum of 5 air
changes per hour is recommended)
Follow the instructions contained in
your battery charger's owner's manual
to charge the batteries in your car.
The following is a summary of the
charging steps. Do not attempt to
recharge your car's batteries without
thoroughly reading and understanding
the manual.
Connect the charger properly with the
plug case (see charger's owner's
manual). Do not insert the AC output
plug into the car directly.
CAUTION
Use battery chargers that are only
used for this car. Thoroughly read
and understand the manual.
When installing the batteries, do not
put the wrenches or other metal
objects across the battery terminals.
An arc occur causing explosion of
batteries.
Do not disconnect the DC output
cord from the battery receptacle
when the charger is on because that
may cause an explosion.
3. The charger will turn off automatically
when the batteries reach full charge.
4. After the charger has turned off
disconnect the DC output plug from the
golf car receptacle by grasping the plug
body and pulling the plug straight out of
the receptacle.
MaintenanceMaintenance

21
A 2
20
Temperature S a t i s f a c t o r y
Hydrometer Reading
2.link the cables as the picture
When installing the batteries:
1. Please carefully place the cables and make them down, making sure
the cables not crossover the vent caps.
2. Always remove the negative(-) cable from the motor controller first,
and install it at last.
3. Do not over-tighten the battery nuts, because too much force would
damage the battery case.
Before charging:
Only add distilled water. If fluid is below
the top of the plates, add just enough to
cover plates.
After charging:
Check that the fluid level is appropriately
1/4 to 1/2 inch above the plates and 1/4 to
3/8 inch below the level is low. Add
distilled water carefully. Adding distilled
water after charging helps prevent boiling
over.
A Battery cap
B Plates
C Maximum fluid level
D Minimum fluid level
Normal tap water contains minerals
which are harmful to a battery;
therefore, refill only with distilled water.
3. Using a hydrometer, check the specific
gravity of the battery fluid in each cell
against the readings on the chart below.
Consult an AdvancedEV dealer if any low
readings are found.
MaintenanceMaintenance

18 19
recommended oil：
SAE 90 gearoil
Gearcase capacity：
wheel nut tightening torque:
105 N M-120N M
Check the oil level in the gearbox
Gearbox Oil
1. Place the car on a horizontal level
2. Lift the cushion
3. Remove the oil plug
4. Pour in the gear oil slowly until it
reaches the opening
5. It's fine for oil overflowing.
Make it stop when it flows out, alien
materials are forbidden from getting
into the gearbox.
1. Take out the wheel nuts, after the car is
totally still. Anything will be fine to
prevent it moving.
2. Elevate the car with a jack and take out
the tire and the screw bolt.
3. Use the steps above conversely, when
installing the tire.
Be sure the main switch be in the"off"
position, before you check the wheel or
braking system.
Brake Adjustment
The brake of this car can be adjusted by
yourself.
Please use your foot to press the braking
pedal, making sure it has been functioning
properly.
Consult your AdvancedEV dealer
before using the car, if you have any
problem with the brake. Because
serious accident would be caused in
case of brake failure.
CAUTION
MaintenanceMaintenance

P
24
85-95MM
25
P
P
Brake pedal forwarding distance :
85-95mm ( 3.35-3.74 inch)
To adjust the brake distance:
Do not loosen the brake cables
because of air leakage, which will
also affect the brake adjustment
and result in braking function.
1. Remove the cover of the dash board
2. Check the brake pedal by pressing
with two fingers with proper force
and measuring the forwarding
distance of the pedal until resistance
is felt.
CAUTION
Before adjusting the brake, tread
the brake pedal several times to
adjust the brakes.
Periodic Maintenance Chart
It is necessary to check periodically for
best performance and safe operation.
Do not fix brake cable too tight as this
will make the brake adjust can't work
perfectly, and therefore lower down the
brake performance.
Before maintenance, make sure
that main switch is off and hand
brake on. Your local dealer or qualified
technician are responsible for it.
MaintenanceMaintenance

27
26
C=Check CA =Check Adjust R=Replace S =Service
CL=Clean and Lubricate L=Lubricate
Remarks
Pre-
Operation
20 rounds
20 hours
20 hours
160kms(
Every
Month)
125
rounds
125 hours
600 miles
1000kms (
Every 6
250 rounds
250 hours
1200 miles
1000kms(
Every
Years)
500 rounds
500 hours
2500 miles
4000kms(
Every 2
Years)
1000
rounds
1000 hours
5000 miles
8000kms
(Every 4
Page
Charge
Cl ean Ba tter y top s ,for
tightness of hold-down screws
and terminals
Check brake pedal freeplay and
adjust if necessary
Check steering operation
Check tire pressure tread
depth tire surface for damage
Check bode and chassis,for damage
Check tightness of all bolts,nuts and
screw
Check reverse buzzer
Pre-Operation Every month
Check electrolyte level
C h e c k f o r l o o s e o r b r o k e n
connectionsw
C l e a n L u b e P e d a l
control area
Check all wire insulation for crack
and/or worn spots
Check shock absorbers for oil
leaks and damaged springs
Perform a discharge test
protectant
Check shoe lining thickness
and rear axle beating play
C h e c k s t e e r i n g k n u c k l e
bushing freeplay/Adjust wheel
alighment
Check wheel not tightness
front wheel bearing play
Check gear box oil level and
leakage
C h e c k f o r g r e a s e
leakage;adjust gear box if
Replace gear box oil
Check operation and adjust pedal
stop if necessary
Every 6 month Every year Every 4 month
Items without a page number referene should be serviced by approved
agent or qualified technician.
This manual doesn't contain these procedures.They are containerd in the
Service Manual
CHASSIS PREPARATION
1. Verify the air pressure of the tire is
25psi (4kgf/cm3);
2. Clean the outside of the car with
anti-rust oil;
3. Cover the car and store it in a dry and
well-ventilated place.
BATTERY PREPARATION
1. Recharge the batteries and check the
fluid levels at least once a month.
2. Disconnecting cables in case of long
storage.
3. Clean the top of the batteries with
baking soda and water so as to avoid
erosion.
Cleaning products are forbidden to
put into battery cells
CAUTION
Perform the following preparations when
leaving your golf car unused for a long
time:
NOTE:
Turn the main switch key to the "OFF"
position, remove the key, and put it in a
safe place.
Storage
Maintenance

29
28
1. We repair/replace items that are covered by warranty.
2. Please contact us for universal parts, like tires, cushions etc, which are out of
warranty.
Below conditions are not under warranty
1. When the car is used or maintained without warranty conditions or the
User's Manual.
2. When repairs are made by unauthorized dealers or repair shops.
3. When the warranty expired.
4. When spare parts are used from other manufacturers.
5. When the car has been assembled or modified without our permission.
6. When vehicle use exceeds it maximum capabilities.
7. When damage is caused by natural disasters like typhoon, flood,
earthquake, etc.
Warranty And After-Sale Service
Please read the following carefully for your interest and good after sales service
from us.
What is under warranty and valid date
Please read this instruction book carefully after you buy car from us.
We promise to change or repair for material quality or designing problem.
After the car is delivered from our factory
Warranty And After-Sale Service
Valid Warranty
Buyers need to fill warranty card, stamp and send back to us. The warranty
comes into effect upon we receive and confirm.
Kind Statement
Any damage caused by improper action, which does not match instruction
book, we will not accept as warranty.

Serial No. Programmer Display
1.1 HW FAILSAFE
1.2 THROTTLE FAULT1
1.3 SPEED SENSOR FAULT
1.4 HPD
1.5 MOTOR STALL
2.1 LOW BATTERY VOLTAGE
2.2 OVER VOLTAGE
2.3 THEMAL CUTBACK
2.4 MAIN DRIVER ON
2.5 AUX COIL FAULT
3.1 MAIN DRIVER OFF
3.2 MAIN WELDED
3.3 PRECHARGE FAULT
3.4 FILED MISSING
3.5 AUX DRIVER OFF
4.1 CURRENT SENSOR FAULT
4.2 DRIVER OVER CURRENT
4.3 — SHORTTED
4.4 AUX RELAY DNC
4.5 WELDED AUX RELAY
5.1 KEY SWITCH SRO
5.2 MAIN COIL OPEN
5.3 AUX DRIVER ON
5.4 CIRCUIT BRKR OPEN
5.5 MAIN DROPOUT
30
1266/1268 Trouble Shooting Chart