Advantech MIC-770 User manual

User Manual
MIC-770
Compact Fanless System with
8th/9th Gen Intel® Core™ i CPU
Socket (LGA 1151)

MIC-770 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2023
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. The information provided in this manual is intended to be accurate and reliable.
However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any
infringements of the rights of third parties that may result from its use.
Acknowledgments
Award is a trademark of Award Software International, Inc.
Intel® and Pentium® are trademarks of Intel Corporation.
Microsoft Windows® is a registered trademark of Microsoft Corp.
Cooper is a trademark of Eaton Corporation.
Infineon is a trademark of Infineon Technologies.
TI is a trademark of Texas Instruments.
Asmedia is a trademark of Asmedia Technology Inc.
Exar is a trademark of Exar Corporation.
INTERSIL is a trademark of Intersil Corporation.
Nuvoton is a trademark of Nuvoton Technology Corporation.
All other product names or trademarks are properties of their respective owners.
For more information about this and other Advantech products, please visit our web-
site at:
http://www.advantech.com
http://www.advantech.com/ePlatform
For technical support and service, please visit our support website at:
http://support.advantech.com.tw/support
Part No. Edition 2
Printed in China July 2023

iii MIC-770 User Manual
Product Warranty (2 years)
Advantech warrants the original purchaser that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products that have been repaired or altered by
persons other than repair personnel authorized by Advantech, or products that have
been subject to misuse, abuse, accident, or improper installation. Advantech
assumes no liability under the terms of this warranty as a consequence of such
events.
Because of Advantech’s high quality-control standards and rigorous testing, most
customers never need to use our repair service. If an Advantech product is defective,
it will be repaired or replaced free of charge during the warranty period. For out-of-
warranty repairs, customers will be billed according to the cost of replacement mate-
rials, service time, and freight. Please consult your dealer for more details.
If you believe your product to be defective, follow the steps outlined below.
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages displayed when the prob-
lem occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain a return merchandise authori-
zation (RMA) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a completed Repair and Replacement
Order Card, and a proof of purchase date (such as a photocopy of your sales
receipt) into a shippable container. Products returned without a proof of pur-
chase date are not eligible for warranty service.
5. Write the RMA number clearly on the outside of the package and ship the pack-
age prepaid to your dealer.
Declaration of Conformity
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference. In
this event, users are required to correct the interference at their own expense.

MIC-770 User Manual iv
Technical Support and Assistance
1. Visit the Advantech website at www.advantech.com/support to obtain the latest
product information.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before calling:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Warnings, Cautions, and Notes
Warning! Warnings indicate conditions that if not observed can cause personal
injury!
Caution! Cautions are included to help prevent hardware damage and data
losses. For example,
“Batteries are at risk of exploding if incorrectly installed. Do not attempt
to recharge, force open, or heat the battery. Replace the battery only
with the same or equivalent type as recommended by the manufacturer.
Discard used batteries according to the manufacturer's instructions.”
Note! Notes provide additional optional information.

v MIC-770 User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Retain this user manual for future reference.
3. Disconnect the equipment from all power outlets before cleaning. Use only a
damp cloth for cleaning. Do not use liquid or spray detergents.
4. For pluggable equipment, the power outlet socket must be located near the
equipment and easily accessible.
5. Protect the equipment from humidity.
6. Place the equipment on a reliable surface during installation. Dropping or letting
the equipment fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. Do not cover the openings.
8. Ensure that the voltage of the power source is correct before connecting the
equipment to a power outlet.
9. Position the power cord away from high-traffic areas. Do not place anything over
the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage from transient overvoltage.
12. Never pour liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If any of the following occurs, have the equipment checked by service person-
nel:
–The power cord or plug is damaged.
–Liquid has penetrated the equipment.
–The equipment has been exposed to moisture.
–The equipment is malfunctioning, or does not operate according to the user
manual.
–The equipment has been dropped and damaged.
–The equipment shows obvious signs of breakage.
15. Do not leave the equipment in an environment with a storage temperature of
below -40 °C (-40 °F) or above 85 °C (185 °F) as this may damage the compo-
nents. The equipment should be kept in a controlled environment.
16. CAUTION: Batteries are at risk of exploding if incorrectly replaced. Replace only
with the same or equivalent type as recommended by the manufacturer. Discard
used batteries according to the manufacturer’s instructions.
17. In accordance with IEC 704-1:1982 specifications, the sound pressure level at
the operator’s position shall not exceed 70 dB (A).
18. RESTRICTED ACCESS AREA: The equipment should only be installed in a
Restricted Access Area.
DISCLAIMER: These instructions are provided according to IEC 704-1 standards.
Advantech disclaims all responsibility for the accuracy of any statements contained
herein.

MIC-770 User Manual vi
Packing List
Before installation, please ensure the following items have been shipped:
Ordering Information
Optional i-Module
* Please refer to the i-Module datasheet for more details.
** Q370 SKU only.
1 x MIC-770 bare-bone system
1 x MIC-770 Startup Manual P/N: 2041077001
4-pin Phoenix connector P/N: 1652003234
2 x mounting bracket P/N: 1960070543T00A
1 x SATA cable P/N: 1700013095-01
1 x SATA power cable P/N: 1700024372-01
Thermal pad for memory P/N: 1990019498N000
Thermal grease for the CPU P/N: 2170000093-01
Module
Number PCH VGA HDMI
2.5"
HDD/
SSD
USB
3.1/3.0/
2.0
GbE COM PCIe /
PCI Exp Power
MIC-770Q-00A2 Q370 1 1 1 2/6/0 2 2, up to 6
via cable
i-module
(Optional) DC9~36V
MIC-770H-00A2 H310 1 1 1 0/4/4 2 2, up to 6
via cable
i-module
(Optional) DC9~36V
Module Number Description
4-slot expansion module
MIC-75M13-00A2 1 x PCIe x16 + 3 x PCI slot i-module
MIC-75M40-00A2** 1 x PCIe x8 + 3 x PCIe x4 slot i-module
2-slot expansion module
MIC-75M20-00C1 1 x PCIe x16 + 1 x PCIe x4 slot i-module
MIC-75M20-01A2 2 x PCIe x8 slot i-module
MIC-75M11-00A2** 1 x PCIe x16 + 1 x PCI slot i-module
1-slot expansion module
MIC-75M10-00A2 1 x PCIe x16 slot
Featured expansion module
MIC-75S00-00A1 2 x removable storage
MIC-75S20-00A2 1 x PCIe x16 + 1 x PCIe x4 slot + 2 x 2.5" swappable HDD/SSD
MIC-75G20-10B1 1 x PCIe x16 (Double Deck) + 1 x PCIe x4 + 2 x 2.5" hot-swap HDD/
SSD GPU slot i-module
MIC-75G30-00B1** 2 x PCIe x8 + 1 x PCIe x4 slot + 2 x 2.5" swappable HDD/SSD
MIC-75GF10-00A1 MIC-75GF10 MXM i-module, 1 x PCIe x16 + 1 x PCIe x4
98R17520301 2 x 3.5" HDD kit

vii MIC-770 User Manual
Optional Accessories
Part Number Description
96PSA-A230W24P4-3* ADP A/D 100-240V 230W 24V C14 TERMINAL BLOCK 4P
96PSA-A150W19P4-4 ADP A/D 100-240V 150W 19V C14 TERMINAL BLOCK 4P
1702002600 Power cord (USA) UL/CSA, 3-pin, 10A, 125V, 1.83M, 180 D
1700022940-01 Power cord PSE, 3-pin, 7A, 125V, 3M, DAC-ST01
1702002605 Power cord (EU), 3-pin, 10A, 250V 1.83M, 90D
96PSD-A240W24-MN A/D 100-240V 240W 24V NDR DIN RAIL
1700031170-01 DC-DC power cord, A cable TEM*4/TEM*4 UL2464 18AWG 150cm
1700029720-01 AC-DC power cord (US), M cable AC CONN 3P 183cm
1700030520-01 AC-DC power cord (CN), M cable conn 3P CCC 10A 250V 150cm
1700031408-01 AC-DC power cord (EU), M cable conn 3P/G-TEM*3 80 cm
AIIS-DIO32-00A1E AIIS 32-bit GPIO module
PCA-TPM-00B1E TPM 2.0 module
98R17500001 MIC DVI FIO
98R17500101 MIC HDMI/Remote power on/off FIO
98R17500301 MIC HDMI kit FIO
98R17500401 MIC Remote power on/off FIO
98R17500601 MIC COMport kit FIO
98R17500701 MIC Remote power on/off kit for SFIO
98R17500801 MIC Reset/Remote power on/off/5VDC kit FIO
98R17500901 MIC GPIO kit
98R17501001 MIC DisplayPort kit
98R17501101 MIC COM and HDMI kit
98910770301*** MIC NVMe + 4 LAN Advanced FIO
98910770401*** MIC NVMe Advanced FIO
98910770501*** MIC 4 PoE Advanced FIO
98R1752010E 2nd 2.5" HDD/SSD kit (used in 2-slot i-Module)
98R1752020E MIC Dual SSD kit
98R17500201 MIC DIN-Rail Mounting kit (90/180)
98R17500210 MIC DIN-Rail Mounting kit (180)
98R17500501 MIC Wall Mount kit
i-Door Module
(MOS series module)
Supports i-Door module (MOS series), except PoE
Please refer to the Advantech website below or search "iDoor Mod-
ule Mini PCIe Expansion Kit".
http://www.advantech.com.tw/products/idoor-module-mini-pcie-
expansion-kit/sub_bc858a7f-a52b-441b-a59c-f511289f98bc
i-Door Module
(PCM series module)
Supports i-Door module (PCM series) except PoE
Please refer to the Advantech website below:
http://www.advantech.com/products/idoor-technology-mini-pcieex-
pansion-kit/sub_efdb96af-a8f7-4cde-9592-dbf5c9794d16
Note: A bracket is required to fix the PCM series i-door module in
place. Please refer to P/N: 1960065854N001 i-Door_bracket

MIC-770 User Manual viii
i-Module Optional Accessories
Please refer to the Flex I/O datasheet for more details.
* Please use the 230W adapter when i-Module is added.
** AIIS-DIO32 requires a DB37 bracket (P/N: 1960068787N002).
*** Q370 SKU only.
Part Number Description
98R1751300E 1 x 8 cm FAN module (for MIC-75M13/75M40/75S20)
98R1752000E 2 x 4 cm FAN module (for MIC-75M20/MIC-75M11)

ix MIC-770 User Manual
Contents
Chapter 1 General Introduction ...........................1
1.1 Introduction ............................................................................................... 2
1.2 Product Features....................................................................................... 2
1.2.1 General ......................................................................................... 2
1.2.2 Display .......................................................................................... 2
1.2.3 Ethernet ........................................................................................ 3
1.3 Chipset ...................................................................................................... 3
1.3.1 Functional Specifications .............................................................. 3
1.4 Mechanical Specifications......................................................................... 4
1.4.1 Dimensions ................................................................................... 4
Figure 1.1 MIC-770 Physical Dimensions.................................... 4
1.4.2 Weight........................................................................................... 5
1.5 Power Requirements................................................................................. 5
1.5.1 System Power............................................................................... 5
1.5.2 RTC Battery .................................................................................. 5
1.6 Environmental Specifications.................................................................... 5
1.6.1 Operating Temperature................................................................. 5
1.6.2 System Safety Certification Test Temperature ............................. 5
1.6.3 Relative Humidity .......................................................................... 5
1.6.4 Storage Temperature.................................................................... 5
1.6.5 Vibration During Operation ........................................................... 5
1.6.6 Shock During Operation................................................................ 5
1.6.7 Safety............................................................................................ 5
1.6.8 EMC .............................................................................................. 5
Chapter 2 H/W Installation....................................7
2.1 Introduction ............................................................................................... 8
2.2 Jumpers & Slide Switches......................................................................... 8
2.2.1 Jumper Description ....................................................................... 8
2.2.2 Jumper List ................................................................................... 9
Table 2.1: Jumper List ................................................................. 9
2.3 Connectors.............................................................................................. 10
2.3.1 MIC-770 External I/O Connectors............................................... 10
Figure 2.1 MIC-770 Front View.................................................. 10
Table 2.2: COM Connector Pin Assignments............................ 11
Figure 2.2 Ethernet Connector .................................................. 11
Table 2.3: Ethernet Connector Pin Assignments....................... 11
Figure 2.3 Audio Connectors ..................................................... 12
Table 2.4: Audio Connector Pin Assignments ........................... 12
Figure 2.4 USB 3.0 Connector................................................... 12
Table 2.5: USB 3.0 Connector Pin Assignments....................... 12
Figure 2.5 VGA Connector ........................................................ 13
Table 2.6: VGA Connector Pin Assignments............................. 13
Figure 2.6 HDMI Receptacle Connector.................................... 13
Table 2.7: HDMI Connector Pin Assignments ........................... 13
Figure 2.7 4-Pin Header ............................................................ 14
Table 2.8: Pin Assignments for the Power Connector Pin Header
14
Figure 2.8 Power Button ............................................................ 14
Figure 2.9 LED Indicators .......................................................... 14
2.4 Installation ............................................................................................... 15
2.4.1 HDD Installation .......................................................................... 15
2.4.2 Memory Installation..................................................................... 17

MIC-770 User Manual x
2.4.3 m-SATA / Mini PCIe Installation ................................................. 17
2.4.4 Internal USB 2.0 Installation (Q SKU Only) ................................ 18
2.4.5 COM 3/4/5/6 Port Installation...................................................... 18
2.4.6 Expansion Module Installation (Optional) ................................... 19
2.4.7 MIC-770 MB I/O Connector ........................................................ 21
Chapter 3 BIOS Operation ................................. 23
3.1 Introduction ............................................................................................. 24
Figure 3.1 Main Setup Screen................................................... 24
3.2 Entering BIOS Setup............................................................................... 25
3.2.1 Main Menu.................................................................................. 26
Figure 3.2 Main Setup Screen................................................... 26
3.2.2 Advanced BIOS Features Setup................................................. 27
Figure 3.3 Advanced BIOS Features Setup Screen.................. 27
Figure 3.4 Platform Misc Configuration ..................................... 28
Figure 3.5 CPU Configuration ................................................... 29
Figure 3.6 Power & Performance .............................................. 30
Figure 3.7 CPU Power Management Control ............................ 30
Figure 3.8 PCH-FW Configuration............................................. 31
Figure 3.9 AMT Configuration ................................................... 32
Figure 3.10 CIRA Configuration ................................................. 32
Figure 3.11 ASF Configuration ................................................... 33
Figure 3.12 Secure Erase Configuration .................................... 34
Figure 3.13 OEM Flag Settings .................................................. 35
Figure 3.14 MEBx Resolution Settings....................................... 36
Figure 3.15 TPM Settings........................................................... 37
Figure 3.16 ACPI Settings .......................................................... 38
Figure 3.17 SMART Settings...................................................... 39
Figure 3.18 Super IO Configuration............................................ 40
Figure 3.19 Serial Port 1 Configuration ...................................... 40
Figure 3.20 Serial Port 2 Configuration ...................................... 41
Figure 3.21 Serial Port 3 Configuration ...................................... 41
Figure 3.22 Serial Port 4 Configuration ...................................... 42
Figure 3.23 Serial Port 5 Configuration ...................................... 42
Figure 3.24 Serial Port 6 Configuration ...................................... 43
Figure 3.25 PC Health Status..................................................... 45
Figure 3.26 Fan Configuration.................................................... 46
Figure 3.27 S5 RTC Wake Settings ........................................... 47
Figure 3.28 Serial Port Console Redirection .............................. 48
Figure 3.29 Intel® TXT Information ............................................ 49
Figure 3.30 PCI Subsystem Settings.......................................... 49
Figure 3.31 CSM Configuration .................................................. 50
Figure 3.32 USB Configuration................................................... 51
Figure 3.33 Network Stack ......................................................... 52
3.2.3 Chipset........................................................................................ 53
Figure 3.34 Chipset .................................................................... 53
Figure 3.35 System Agent (SA) Configuration ........................... 53
Figure 3.36 Graphics Configuration............................................ 54
Figure 3.37 PEG Port Configuration........................................... 55
Figure 3.38 PEG Port Feature Configuration ............................. 56
Figure 3.39 Memory Configuration ............................................. 57
Figure 3.40 PCH-IO Configuration ............................................. 58
Figure 3.41 PCI Express Root Port Setting ................................ 59
Figure 3.42 SATA Configuration................................................. 60
Figure 3.43 USB Configuration................................................... 61
Figure 3.44 HD Audio Configuration........................................... 62
Figure 3.45 Security Configuration ............................................. 63
3.2.4 Security....................................................................................... 64

xi MIC-770 User Manual
Figure 3.46 Security.................................................................... 64
3.2.5 Boot............................................................................................. 65
Figure 3.47 Boot ......................................................................... 65
3.2.6 Save & Exit ................................................................................. 66
Figure 3.48 Save & Exit .............................................................. 66
Chapter 4 Software Installation .........................67
4.1 Before you Begin..................................................................................... 68
4.2 Introduction ............................................................................................. 68
4.3 Windows Driver Setup............................................................................. 68
Appendix A Programming the Watchdog Timer..69
A.1 Programming the Watchdog Timer ......................................................... 70
A.1.1 Watchdog Timer Overview.......................................................... 70
A.1.2 Programming the Watchdog Timer ............................................. 70
Table A.1: Watchdog Timer Registers ....................................... 72
A.1.3 Example Program ....................................................................... 73
Appendix B Programming the GPIO.....................77
B.1 Supported GPIO Register ....................................................................... 78
B.1.1 GPIO Registers........................................................................... 78
B.1.2 GPIO Example Program ............................................................. 79

MIC-770 User Manual xii

Chapter 1
1General Introduction
This chapter gives background
information on MIC-770.

MIC-770 User Manual 2
1.1 Introduction
MIC-770 is a compact, fanless system incorporating the latest generation Intel ® 14nm
platform with the new PCH Q370/H310 on a proprietary form factor motherboard. The
MIC-770 system design concept focuses on “expansion slot modules” so different
applications can integrate the MIC-770 system to form a complete industrial com-
puter.
MIC-770 can also serve as an independent, fanless, compact embedded box com-
puter and accepts a wide range of DC power inputs. The rugged aluminum case not
only provides a great thermal solution but also resists high EMI/shock/vibration. MIC-
770 is equipped with an 8th Gen Intel® Core™ i desktop CPU featuring 6 cores, mak-
ing it highly suitable for embedded and industrial PC applications requiring high pro-
cessor performance within a limited space. It features powerful I/O interfaces,
including Ethernet, USB 3.0, serial port, and two Mini PCIe slots.
1.2 Product Features
1.2.1 General
CPU: 8th Gen Intel
®
Core™ i CPU socket (LGA1151)
PCH: Intel
®
Q370/H310
System Memory: Dual-channel DDR4 2133/2400/2666 MHz (without ECC), up
to 32GB
Storage Devices: Supports 1 drive bay space for SATA 2.5" HDD/SSD
mSATA: Supports 1 x mSATA via Mini PCIe slot
Graphics: VGA + HDMI
Ethernet Ports: 2 x RJ-45
Watchdog Timer: Single chip watchdog 255-level interval timer, setup by soft-
ware
I/O Interface: 2 x RS-232/422/485 supports auto flow control; 4 x RS-232 via
optional cable
USB:
–Q370: 2 x USB 3.1, 6 x USB 3.0 and 1 x internal USB 2.0
–H310: 4 x USB 3.0 and 4 x USB 2.0
Audio: High Definition Audio (HD), Line-out, Mic-in
Expansion interface:
–Q370: 1 x Mini PCIe (via USIM), 1 x Mini PCIe/ mSATA
–H310: 1 x Mini PCIe (via USIM), 1 x mSATA
1.2.2 Display
Chipset:
–Q370: Intel
®
HD Graphics 630, supports DirectX 12
–H310: Intel
®
HD Graphics 610, supports DirectX 12
Graphics Video Max Memory: 1.7 GB
Resolution:
–VGA: Supports up to 2048 x 1152 @ 60 Hz
–HDMI: Supports up to 3840 x 2160 @ 30Hz

3 MIC-770 User Manual
Chapter 1 General Introduction
1.2.3 Ethernet
Chipset:
–Q370 LAN1: Intel
®
I219LM, LAN2: Intel
®
i210IT
–H310 LAN1: Intel
®
I219V, LAN2: Intel
®
i210IT
Speed: 10/100/1000 Mbps
Interface: 2 x RJ-45
Standard: Compliant with IEEE 802.3, IEEE802.3u, IEEE 802.ab.
1.3 Chipset
1.3.1 Functional Specifications
1.3.1.1 Processor
1.3.1.2 Chipset
Processor 8th Gen Intel® Core™ i CPU socket (LGA1151)
PCH Intel® Q370/H310 chipset
Memory
Supports DDR4 2133/2400/2666MHz (without ECC)
SODIMM Socket:
–260-pin SODIMM socket*2 (up to 16GB per socket)
Chipset
Integrated Intel®
HD Graphics
Intel® HD Graphics 630/610
Supports DirectX 12
Supports OpenGL 4.4
Supports Intel® Quick Sync Video
I/O interface
–VGA: Supports resolutions up to 2048 x 1152 @ 60 Hz
(VGA connector: On-board D-SUB 15P)
–HDMI: Supports resolution up to 3840 × 2160 @ 30Hz
(HDMI Connector: On-board HDMI)
SATA Interface
3 x SATA 3.0 (Q SKU), 1 x SATA 3.0 (H SKU)
Legacy IED (Including IRQ) / Native AHCI appearance to OS
Partial/slumber power management modes with wake
Capable of 6 Gbit/s transfer rate
USB Interface
Q370: 2 x USB 3.1, 6 x USB 3.0 and 1 x internal USB 2.0
H310: 4 x USB 3.0 and 4 x USB 2.0
Supports high-speed, full-speed, and low-speed
Supports legacy keyboard/mouse software
Power
Management
Supports ACPI 5.0
ACPI Power Management Logic supported
Power Connector: plug-in block 4Px1
BIOS AMI 256Mb Flash BIOS via SPI

MIC-770 User Manual 4
1.3.1.3 Others
1.4 Mechanical Specifications
1.4.1 Dimensions
Figure 1.1 MIC-770 Physical Dimensions
Serial ports
Nuvoton NCT 6106D supported
Up to 6 serial ports by Nuvoton NCT6106D supported
High speed NS16C550A compatible UARTs with data rates to
115200 bps
Supports IRQ sharing among serial port
COM1/2: Supports RS-232/422/485 and setting mode by BIOS and
supports auto flow control
COM 3~6: Support for RS-232, via optional cable
Serial port connectors: D-SUB CON.9P
LAN
Q370 LAN1: Intel® I219LM, LAN2: Intel® i210IT
H310 LAN1: Intel® I219V, LAN2: Intel® i210IT
Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.ab.
Supports 10/100/1000 Mbps
Supports Wake-on-LAN
Audio
Audio Codec: Realtek ALC888:
Compliant with HD Audio specifications
Supports to 16/20/24-bit DAC and 16/20/24-bit ADC resolution
Supports: Line-out, Mic-in
DAC supports 16/20/24-bit PCM format, multiple stereo recording
Battery backup BR2032 3 V/190mAh
77
192
230
UNIT : mm

5 MIC-770 User Manual
Chapter 1 General Introduction
1.4.2 Weight
2.8 kg (6.17 lb)
1.5 Power Requirements
1.5.1 System Power
Minimum power input: DC 12V (-25%) -30V (+20%), Absolute Maximum Volt-
age Rating is 9V - 36V
1.5.2 RTC Battery
BR2032 3 V / 190 mAh
1.6 Environmental Specifications
1.6.1 Operating Temperature
-10 ~ 40 °C (65W CPU) & -10 ~ 50 °C (35W CPU) with 0.7m/sec airflow: with
1 x Industrial SSD without PC expansion boards
1.6.2 System Safety Certification Test Temperature
0 ~ 40 °C with 2.5″ HDD
1.6.3 Relative Humidity
95% @ 40°C (non-condensing)
1.6.4 Storage Temperature
-40 ~ 85 °C (-40 ~ 185 °F)
1.6.5 Vibration During Operation
When the system is equipped with SSD only: 3 Grms, IEC 60068-2-64, random,
5 ~ 500 Hz, 1 Oct/min., 1 hr/axis, x,y,z 3 axes.
When the system is equipped with a 2.5" HDD: 1 Grms, IEC 60068-2-64, ran-
dom, 5 ~ 500 Hz, 1 Oct/min., 1 hr/axis, x,y,z 3 axes.
1.6.6 Shock During Operation
When the system is equipped with SSD only: 20 G, IEC 60068-2-27, half sine,
11 ms duration.
1.6.7 Safety
UL/CB, CCC, BSMI
1.6.8 EMC
CE, FCC, CCC, BSMI

MIC-770 User Manual 6

Chapter 2
2H/W Installation
This chapter introduces external
I/O and the installation of the
MIC-770 hardware.

MIC-770 User Manual 8
2.1 Introduction
The following sections show the internal jumper settings and the external connectors
and pin assignments.
2.2 Jumpers & Slide Switches
2.2.1 Jumper Description
You may configure MIC-770 to match the needs of your application by setting jump-
ers. A jumper is a metal bridge used to close an electric circuit. It consists of two
metal pins and a small metal clip (often protected by a plastic cover) that slides over
the pins to connect them. To close a jumper, you connect the pins with the clip. To
open a jumper, you remove the clip. Sometimes a jumper will have three pins,
labeled 1, 2, and 3. In this case you would connect either pins 1 and 2, or 2 and 3.
The jumper settings are schematically depicted in this manual as follows.
A pair of needle-nose pliers may be helpful when working with jumpers. If you have
any doubts about the best hardware configuration for your application, contact your
local distributor or sales representative before you make any changes. Generally, you
simply need a standard cable to make most connections.
closed 2-3closedopen
12 12
closed 2-3closedopen