Advantech IDK-2110R XGA Series User manual

User Manual
IDK-2110R XGA Series
TFT-LCD 10.4" XGA (LED
Backlight)

IDK-2110R XGA User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2016
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
AMI is a trademark of American Megatrends Inc.
IBM and PC are trademarks of International Business Machines Corporation.
Intel® Core 2 Quad, Pentium Dual Core and Celeron are trademarks of Intel Corpo-
ration.
WinBond is a trademark of Winbond Corporation.
All other product names or trademarks are properties of their respective owners.
Part No. 2006211030 Edition 1
Printed in Taiwan August 2016

iii IDK-2110R XGA User Manual
A Message to the Customer
Advantech Customer Services
Each and every Advantech product is built to the most exacting specifications to
ensure reliable performance in the harsh and demanding conditions typical of indus-
trial environments. Whether your new Advantech equipment is destined for the labo-
ratory or the factory floor, you can be assured that your product will provide the
reliability and ease of operation for which the name Advantech has come to be
known.
Your satisfaction is our primary concern. Here is a guide to Advantech’s customer
services. To ensure you get the full benefit of our services, please follow the instruc-
tions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions,
you can easily find answers in your product documentation. These answers are nor-
mally a lot more detailed than the ones we can give over the phone.
So please consult this manual first. If you still cannot find the answer, gather all the
information or questions that apply to your problem, and with the product close at
hand, call your dealer. Our dealers are well trained and ready to give you the support
you need to get the most from your Advantech products. In fact, most problems
reported are minor and are able to be easily solved over the phone.
In addition, free technical support is available from Advantech engineers every busi-
ness day. We are always ready to give advice on application requirements or specific
information on the installation and operation of any of our products.

IDK-2110R XGA User Manual iv
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandise
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.

v IDK-2110R XGA User Manual
Contents
Chapter 1 Overview...............................................1
1.1 General Description .................................................................................. 2
1.2 Display Characteristics.............................................................................. 2
1.3 Mechanical Specification........................................................................... 2
1.4 Mechanical Dimension .............................................................................. 3
1.5 Absolute Maximum Ratings ...................................................................... 3
1.5.1 Absolute Ratings of the TFT LCD Module .................................... 3
1.5.2 Absolute Environment Ratings...................................................... 3
1.6 Block Diagram........................................................................................... 4
Figure 1.1 TFT LCD module ........................................................ 4
Chapter 2 Electrical Characteristics....................5
2.1 TFT LCD Module....................................................................................... 6
2.1.1 Electrical characteristics\ .............................................................. 6
2.1.2 Signal Electrical Characteristics.................................................... 6
2.2 Backlight Unit ............................................................................................ 7
2.2.1 Parameter guideline for LED backlight ......................................... 7
Chapter 3 Signal Characteristics.........................9
3.1 Pixel Format Image ................................................................................. 10
3.2 Pin Description ........................................................................................ 10
Table 3.1: Pin Description ......................................................... 10
3.3 The Input Data Format ............................................................................ 11
3.3.1 MODE ......................................................................................... 11
3.4 Interface Timing ...................................................................................... 15
3.4.1 Timing Characteristics ................................................................ 15
Table 3.2: Timing Characteristics .............................................. 15
3.4.2 Input Timing Diagram.................................................................. 15
3.5 Power ON/OFF Sequence ...................................................................... 16
Chapter 4 Display Connector Definition ...........17
4.1 TFT LCD Signal(CN1): LVDS Connector................................................ 18
Table 4.1: Connector ................................................................. 18
Table 4.2: Pin Assignment......................................................... 18
4.2 LED Backlight Unit Connector(CN3) ....................................................... 18
Chapter 5 Touch Screen.....................................19
5.1 Touch Characteristics ............................................................................. 20
5.2 Optical Characteristics ............................................................................ 20
5.3 Environment Characteristics ................................................................... 20
5.4 Mechanical Characteristics ..................................................................... 20
5.5 Electronic Characteristics........................................................................ 20
Chapter 6 Touch Controller................................21
6.1 Touch Controller Characteristics............................................................. 22

IDK-2110R XGA User Manual vi
6.2 Specifications.......................................................................................... 22
6.3 Environmental Feature............................................................................ 22
6.4 Pin Assignment and Description ............................................................. 23
6.4.1 Connector and LED Location...................................................... 23
6.4.2 Combo Interface Connector, JP1, Pins and Signal Descriptions 23
Figure 6.1 Board mounted header............................................. 23
6.4.3 Touch Screen Connector, JP2, Pins and Signal Descriptions.... 24
6.5 Physical Dimension................................................................................. 24
Appendix A Optical Characteristics..................... 25
A.1 Optical Characteristics ............................................................................ 26
Appendix B Handling Precautions ....................... 29
B.1 Handling Precautions.............................................................................. 30

Chapter 1
1Overview

IDK-2110R XGA User Manual 2
1.1 General Description
This user manual is for the 10.4 inch color TFT LCD module IDK-2110R XGA-series.
IDK-2110R XGA is designed with a wide viewing angle, wide operating temperature
and long life LED backlight which is well suited for Industrial Applications. The LED
driving board for the backlight unit is included in this panel and the LED units are
replaceable. Also, IDK-2110R XGA-series has an LVDS interface and 4-wire resistive
touch solution. The screen format supports: XGA (1024 (H) x 768 (V)) screens and
16.2M (RGB 8-bits) or 262k colors (RGB 6-bits). IDK-2110R XGA is a RoHS product.
1.2 Display Characteristics
The following items are product characteristics under 25°C conditions.
1.3 Mechanical Specification
Items Specifications Unit
Screen Diagonal 10.4 inch
Active Area 210.432(H) x 157.824(V) mm
Pixels H x V 1024 x 3(RGB) x 768 -
Pixel Pitch 0.2055 x 0.0685 mm
Pixel Arrangement R.G.B. Vertical Stripe -
Display Mode Normally Black -
Nominal Input Voltage VDD 3.3 (typ) Volt
Typical Power Consumption 16.05W (typ) Watt
Item Min. Typ. Max. Unit Note
Module Size Horizontal(H) - 230 - mm
Vertical(V) - 180.2 - mm
Depth(D) - 12.3 - mm
Weight - 600 - g -

3 IDK-2110R XGA User Manual
Chapter 1 Overview
1.4 Mechanical Dimension
1.5 Absolute Maximum Ratings
1.5.1 Absolute Ratings of the TFT LCD Module
1.5.2 Absolute Environment Ratings
Note: Maximum Wet-Bulb should be 39°C with no condensation.
AA Center
2-M3 USER HOLE
MIN. DEPTH 3.9mm
MAX. TORQUE 0.35N-m
2-M3 USER HOLE
MIN. DEPTH 3.9mm
MAX. TORQUE 0.35N-m
Unit: mm
Item Symbol
Value
Unit Conditions
Min. Max.
Logic/LCD Drive Voltage VDD -0.3 +4.0 [Volt]
Item Symbol
Value
Unit Conditions
Min. Max.
Operating Temperature TOP -10 +60 °C
Operation Humidity HOP 90 [%RH]
Storage Temperature TST -30 +70 °C
Storage Humidity HST 90 [%RH]

IDK-2110R XGA User Manual 4
1.6 Block Diagram
Figure 1.1 TFT LCD module

Chapter 2
2Electrical
Characteristics

IDK-2110R XGA User Manual 6
2.1 TFT LCD Module
2.1.1 Electrical characteristics\
2.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off.
Note LVDS Signal Waveform.
Parameter Symbol
Value
Unit Condition
Min. Typ. Max.
Supply voltage VDD 3.0 3.3 3.6 V
Current
consumption
IDD - 270 350 mA
Permissive input
ripple voltage
VRP - -100mVp-pV
DD=3.3V
Input signal
voltage
VIL 0.0 - 0.3VDD V "Low" level
VIH 0.7VDD -V
DD V "High" level
Input leak current
IOL -10 - 10 μAV
I3=0V
IOH - -400μAV
I3=3.3V
LVDS Input
voltage
VL0 - 1.9 V
Differential input
voltage
VID 200 - 600 mV
Differential input
threshold voltage
VTL VCM-100- -mV"Low"level
VTH - -V
CM+100 mV "High" level
Terminator R1- 100.0 - Ω
VDD-turn-on
conditions
t1 0.1 - 20 ms
t2 10.0 - - ms
t3 0.0 - - ms
t4 2.0 - - s
t5200.0- -ms
t6200.0- -ms
Parameter Symbol
Value
Unit Remark
Min. Typ. Max.
Differential Input
High Threshold
VTH - - 100 [mV] VCM=1.25V
Differential Input
Low Threshold
VTL 100 - - [mV] VCM=1.25V
Input Differential
Voltage
VID 200 600 [mV]

7 IDK-2110R XGA User Manual
Chapter 2 Electrical Characteristics
2.2 Backlight Unit
2.2.1 Parameter guideline for LED backlight
The following characteristics are measured under stable conditions using an inverter
at 25°C (Room Temperature):
Note VCC, Ivcc, PVCC, are defined for LED B/L.(100% duty of PWM dimming)
Parameter Symbol
Value
Unit Remark
Min. Typ. Max.
Input Voltage VCC 10.8 12 13.2 [Volt]
Input Current IVCC - 870 1120 [mA] 100% PWM Duty
Power Consumption PVCC - 10.44 14.784 [Watt] 100% PWM Duty
Dimming Frequency FPWM 200 - 10K [Hz]
Swing Voltage 3 3.3 5.5 [Volt]
Dimming Duty Cycle 1 - 100 % fPWM=200Hz
Operation Lifetime 70,000 - Hrs IF = 80mA, Ta = 25°C

IDK-2110R XGA User Manual 8

Chapter 3
3Signal Characteristics

IDK-2110R XGA User Manual 10
3.1 Pixel Format Image
The following figure shows the relationship between the input signal and LCD
pixel format.
3.2 Pin Description
LVDS is a differential signal technology for LCD interface and high speed data trans-
fer devices. The connector pin definition is as below.
Note “Low” stands for 0V. “High” stands for 3.3V. “NC” stands for “Not Connected.”
Table 3.1: Pin Description
Pin No. Symbol Description
1 VDD Power Supply,3.3V(typical)
2 VDD Power Supply,3.3V(typical)
3 GND Ground
4 GND Ground
5RxIN0-LVDS receiver signal channel 0
6RxIN0+
7 GND Ground
8RxIN1-LVDS receiver signal channel 1
9RxIN1+
10 GND Ground
11 RxIN2- LVDS receiver signal channel 2
12 RxIN2+
13 GND Ground
14 CK IN1- LVDS receiver signal CK
15 CK IN1+
16 GND Ground
17 RxIN3- LVDS receiver signal channel 3
18 RxIN3+
19 MODE Bit data select signal (GND: 6bit mode, High:8bit mode)
20 SC Scan direction control (GND: Normal, High: Reverse)

11 IDK-2110R XGA User Manual
Chapter 3 Signal Characteristics
3.3 The Input Data Format
3.3.1 MODE

IDK-2110R XGA User Manual 12

13 IDK-2110R XGA User Manual
Chapter 3 Signal Characteristics

IDK-2110R XGA User Manual 14
Note1 Please follow PSWG.
Note2 R/G/B data 7:MSB, R/G/B data 0:LSB
Signal Name Description Remark
R7 Red Data 7
Red-pixel Data
For 8 bits LVDS input,
MSB: R7; LSB:R0
For 6 bits LVDS input,
MSB: R5; LSB:R0
R6 Red Data 6
R5 Red Data 5
R4 Red Data 4
R3 Red Data 3
R2 Red Data 2
R1 Red Data 1
R0 Red Data 0
G7 Green Data 7
Green-pixel Data,
For 8 bits LVDS input,
MSB: G7; LSB:G0
For 8 bits LVDS input,
MSB: G5; LSB:G0
G6 Green Data 6
G5 Green Data 5
G4 Green Data 4
G3 Green Data 3
G2 Green Data 2
G1 Green Data 1
G0 Green Data 0
B7 Blue Data 7
Blue-pixel Data
For 8 bits LVDS input,
MSB: B7; LSB:B0
For 6 bits LVDS input,
MSB: B5; LSB:B0
B6 Blue Data 6
B5 Blue Data 5
B4 Blue Data 4
B3 Blue Data 3
B2 Blue Data 2
B1 Blue Data 1
B0 Blue Data 0
RxCLKIN LVDS Data Clock
DE Data Enable Signal When the signal is high, the pixel data shall be
valid to be displayed.